Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.sys.raspberry-pi > #25357
| From | RobertoA <amorosik@tiscalinet.it> |
|---|---|
| Newsgroups | comp.sys.raspberry-pi |
| Subject | Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? |
| Date | 2020-12-31 21:38 +0100 |
| Organization | Aioe.org NNTP Server |
| Message-ID | <rslct0$cqt$2@gioia.aioe.org> (permalink) |
| References | <rsi5qr$1ele$1@gioia.aioe.org> <rsiev2$rdq$1@dont-email.me> |
Il 30/12/2020 18:55, Björn Lundin ha scritto:
> Den 2020-12-30 kl. 16:19, skrev RobertoA:
>> The Raspberry4 board has 6 native uart
>> How to proceed?
>
> with virtual ports you need commercial drivers.
> I once did a mapping tcp-port <-> serail port in tcl
> ran in a _very_ busy warehouse translating stacker crane protcol
> (3964rk512)
> it ran 12 serial port on an XP at that time (now - new plcs with tcp/ip
> are installed)
>
> it basically looked like
>
>
>
> proc accept {sock addr port} {
> dbg "[gettime] -> start accept from $addr"
>
> if { ! [string equal $addr $::client_ip]} {
> dbg "[gettime] -> wrong client, got '$addr' but accepts only from
> '$::client_ip'"
> catch {close $::ss}
> catch {close $sock}
> set ::done 1 ;# signal to main loop to let go
> return
> }
>
> set ::my_sock $sock
> set ::my_com [open $::tty {RDWR}]
>
> # Read channels w/o buffering and in binary mode
> fconfigure $::my_sock -buffering none -translation binary
> fconfigure $::my_com -mode $::mode -buffering none -translation binary
>
> # Setup handler for communication on the channels
> fileevent $::my_sock readable [list pass_through $::my_sock $::my_com]
> fileevent $::my_com readable [list pass_through $::my_com $::my_sock]
>
> # make sure noone else connects while a session in running
> catch {close $::ss}
> dbg "[gettime] -> stop accept"
> }
>
>
>
> loop to reopen the listening socket when connection down
> while {1} {
> dbg "[gettime] -> Start listening"
> set ss [socket -server accept $port]
> vwait done ; # wait until the connection is closed
> # clean up after session
> dbg "[gettime] -> Close this session"
> catch {close $::my_com}
> catch {close $::my_sock}
> }
>
> there where som config files and some whitelist involved as well, but
> above is the essence of it
>
>
>
> its usefull, if you connect the pi with your serial device, and the
> conect the PC to the pi via a simple socket.
>
I cannot fully understand how to use the example code described, but it
seems to me very useful to realize what I would like to achieve
How to use this code on Raspberry board?
Back to comp.sys.raspberry-pi | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-30 16:19 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2020-12-30 16:22 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2020-12-30 16:41 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:02 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:36 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Martin Gregorie <martin@mydomain.invalid> - 2020-12-31 21:03 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2020-12-31 21:22 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:10 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Björn Lundin <b.f.lundin@gmail.com> - 2020-12-30 18:55 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:38 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Björn Lundin <b.f.lundin@gmail.com> - 2021-01-01 15:30 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:14 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Björn Lundin <b.f.lundin@gmail.com> - 2021-01-02 13:24 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Deloptes <deloptes@gmail.com> - 2020-12-30 19:02 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:40 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Deloptes <deloptes@gmail.com> - 2021-01-01 21:54 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:01 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Martin Gregorie <martin@mydomain.invalid> - 2020-12-30 18:31 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Deloptes <deloptes@gmail.com> - 2020-12-30 22:21 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2020-12-30 18:52 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Martin Gregorie <martin@mydomain.invalid> - 2020-12-31 00:58 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2020-12-30 20:33 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Deloptes <deloptes@gmail.com> - 2020-12-31 09:37 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:14 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2020-12-31 17:37 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:14 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2020-12-31 10:29 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:44 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2020-12-31 21:18 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2020-12-31 17:50 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:44 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:04 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:41 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Martin Gregorie <martin@mydomain.invalid> - 2020-12-31 21:31 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:20 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Anssi Saari <as@sci.fi> - 2020-12-31 00:15 +0200
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Jim Jackson <jj@franjam.org.uk> - 2020-12-30 22:19 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2020-12-31 21:46 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Jim Jackson <jj@franjam.org.uk> - 2021-01-01 20:29 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Andy Burns <usenet@andyburns.uk> - 2021-01-01 21:28 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:23 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Ahem A Rivet's Shot <steveo@eircom.net> - 2021-01-02 10:41 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:09 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Theo <theom+news@chiark.greenend.org.uk> - 2020-12-30 22:17 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? A. Dumas <alexandre@dumas.fr.invalid> - 2020-12-31 02:14 +0000
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Grant Taylor <gtaylor@tnetconsulting.net> - 2020-12-31 17:39 -0700
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? RobertoA <amorosik@tiscalinet.it> - 2021-01-02 11:08 +0100
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Grant Taylor <gtaylor@tnetconsulting.net> - 2021-01-02 12:29 -0700
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2021-01-02 14:48 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Grant Taylor <gtaylor@tnetconsulting.net> - 2021-01-02 13:31 -0700
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2021-01-03 12:27 -0500
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Grant Taylor <gtaylor@tnetconsulting.net> - 2021-01-03 14:22 -0700
Re: How to realize a 'serial server' (with com port emulation on pc Windows) ? Dennis Lee Bieber <wlfraed@ix.netcom.com> - 2021-01-03 22:27 -0500
csiph-web