[PATCH v5 15/50] mtd: docg3: use mtd_set_ecclayout() where appropriate

From	Boris Brezillon <boris.brezillon@free-electrons.com>
Newsgroups	linux.kernel
Subject	[PATCH v5 15/50] mtd: docg3: use mtd_set_ecclayout() where appropriate
Date	2016-03-30 18:40 +0200
Message-ID	<rirjZ-87s-23@gated-at.bofh.it> (permalink)
References	<rir0C-7XM-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Use the mtd_set_ecclayout() helper instead of directly assigning the
mtd->ecclayout field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/mtd/devices/docg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index e7b2e43..6b516e1 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1857,7 +1857,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->_read_oob = doc_read_oob;
 	mtd->_write_oob = doc_write_oob;
 	mtd->_block_isbad = doc_block_isbad;
-	mtd->ecclayout = &docg3_oobinfo;
+	mtd_set_ecclayout(mtd, &docg3_oobinfo);
 	mtd->oobavail = 8;
 	mtd->ecc_strength = DOC_ECC_BCH_T;
 
-- 
2.5.0

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v5 15/50] mtd: docg3: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-03-30 18:40 +0200

csiph-web