[PATCH v4 0/2] J-Core timer support

From	Rich Felker <dalias@libc.org>
Newsgroups	linux.kernel
Subject	[PATCH v4 0/2] J-Core timer support
Date	2016-07-27 07:40 +0200
Message-ID	<rZpJv-3HB-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

This driver is used with the J2, an open-source VHDL reimplementation
of SH-2.

I've split this out from the main J-Core support patches going
upstream through my own linux-sh tree. Changes since the v3 are mainly
cleanup/simplification, inclusion of sched_clock support based on
suggestions by Daniel Lezcano, and reworking the DT bindings to use
separate reg ranges per cpu rather than cpu-offset for greater
flexibility.

Rich


Rich Felker (2):
  of: add J-Core timer bindings
  clocksource: add J-Core timer/clocksource driver

 .../devicetree/bindings/timer/jcore,pit.txt        |  25 ++
 drivers/clocksource/Kconfig                        |   8 +
 drivers/clocksource/Makefile                       |   1 +
 drivers/clocksource/jcore-pit.c                    | 277 +++++++++++++++++++++
 4 files changed, 311 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/jcore,pit.txt
 create mode 100644 drivers/clocksource/jcore-pit.c

-- 
2.8.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 0/2] J-Core timer support Rich Felker <dalias@libc.org> - 2016-07-27 07:40 +0200
  [PATCH v4 1/2] of: add J-Core timer bindings Rich Felker <dalias@libc.org> - 2016-07-27 07:40 +0200

csiph-web