Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1447378
| From | Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [RFC 0/3] misc: pch_phub: Add quirks for MIPS Boston platform |
| Date | 2016-07-20 19:30 +0200 |
| Message-ID | <rX3tL-4mx-5@gated-at.bofh.it> (permalink) |
| Organization | linux.* mail to news gateway |
Hi,
These are a few patches for using the EG20T UART on the Imagination
Technologies Boston development platform
2 quirks needed
- Pass a specific value for the prefetch register from DT instead of using
the hard-coded default.
- Add a quirk for using the internal 25MHz clock source for the UART block
The patches for Boston platform are inflight.
https://patchwork.kernel.org/patch/8200941/
So pasting a DT node snippet here.
+ eg20t_pch@2,0,0 {
+ compatible = "pci8086,8801";
+ reg = <0x00020000 0 0 0 0>;
+
+ intel,eg20t-prefetch = <0>;
+ };
+ eg20t_uart0@02,10,1 {
+ compatible = "pci8086,8811";
+ reg = <0x00025100 0 0 0 0>;
+
+ clock-frequency = <25000000>;
+ };
Marked as RFC due to the 2/3 patch for DT + PCI-E + board specific quirk
Suggestions and feedback welcome.
Based on v4.7-rc7
Regards,
ZubairLK
Zubair Lutfullah Kakakhel (3):
misc: pch_phub: Read prefetch value from device tree if passed
misc: pch_phub: Add UART_CLK quirk for Boston platform
serial: pch_uart: Add support for reading clock-frequency from DT
drivers/misc/pch_phub.c | 19 ++++++++++++++++++-
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/pch_uart.c | 4 ++++
3 files changed, 23 insertions(+), 2 deletions(-)
--
1.9.1
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
[RFC 0/3] misc: pch_phub: Add quirks for MIPS Boston platform Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> - 2016-07-20 19:30 +0200
csiph-web