Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1433512

Re: [PATCH] mac80211: util: mesh is not connected properly after recovery

From Johannes Berg <johannes@sipsolutions.net>
Newsgroups linux.kernel
Subject Re: [PATCH] mac80211: util: mesh is not connected properly after recovery
Date 2016-06-29 09:30 +0200
Message-ID <rPi6B-1fN-7@gated-at.bofh.it> (permalink)
References <rOZwZ-6qc-13@gated-at.bofh.it> <rPi6B-1fN-9@gated-at.bofh.it> <rOZwZ-6qc-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

On Tue, 2016-06-28 at 14:15 +0300, Yaniv Machani wrote:
> From: Maital Hahn <maitalm@ti.com>
> 
> In the reconfigure process for mesh interface, moved the
> reconfiguration
> of the mesh peers to be done only after restarting the beacons,
> the same as it is done for AP.
> 
> Signed-off-by: Maital Hahn <maitalm@ti.com>
> Acked-by: Yaniv Machani <yanivma@ti.com>
> 
Same here, and this also needs a description of why this is OK with
other drivers, since presumably it already works there.

johannes

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] mac80211: util: mesh is not connected properly after recovery Yaniv Machani <yanivma@ti.com> - 2016-06-28 13:40 +0200
  Re: [PATCH] mac80211: util: mesh is not connected properly after  recovery Johannes Berg <johannes@sipsolutions.net> - 2016-06-29 09:30 +0200
  Re: [PATCH] mac80211: util: mesh is not connected properly after  recovery Johannes Berg <johannes@sipsolutions.net> - 2016-06-29 09:30 +0200

csiph-web