Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1426215
| From | Andi Shyti <andi.shyti@samsung.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks |
| Date | 2016-06-20 07:50 +0200 |
| Message-ID | <rM0fT-4c7-1@gated-at.bofh.it> (permalink) |
| References | <rKXap-43m-9@gated-at.bofh.it> <rLpzH-5f3-9@gated-at.bofh.it> <rLDW1-6sS-3@gated-at.bofh.it> <rM0fT-4c7-3@gated-at.bofh.it> <rLLgR-33m-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Tomasz, > >> > The SPI 3 bus uses two clocks, a bus clock and an input clock. > >> > Do not disable the clocks when unused in order to allow access to > >> > the SPI 3 device. > >> > >> If unused, why would access to SPI 3 device needed? > > > > because next I will submit a small driver which uses the SPI3. > > Actually in the exynos5433 boards all the SPI are used but not all > > the drivers are ported to mainline. > > Then shouldn't the driver request the clocks and enable them? Or I'm > missing something obvious? :) the reason is that... [ from the patch ] > GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in", > - ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0), > + ENABLE_SCLK_PERIC, 20, > + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), ... the sclk_ioclk_spi3 is new in exynos5433 and there is no implementation for enabling/disabling that particular clock... > GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC, > - 18, CLK_SET_RATE_PARENT, 0), > + 18, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0), ... while in this case your question makes sense, but it depends on which clock the device (s3c64xx) is requesting (from the DTS). In any case, I kept it consistent with the SPI1, which falls in the same case, as in mainline we don't have any DTS for exynos5433 (yet!). Thanks, Andi
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Andi Shyti <andi.shyti@samsung.com> - 2016-06-17 10:20 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Tomasz Figa <tomasz.figa@gmail.com> - 2016-06-18 16:40 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Andi Shyti <andi@etezian.org> - 2016-06-19 08:00 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Tomasz Figa <tomasz.figa@gmail.com> - 2016-06-19 15:50 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Andi Shyti <andi.shyti@samsung.com> - 2016-06-20 07:50 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Tomasz Figa <tomasz.figa@gmail.com> - 2016-06-20 11:10 +0200
Re: [PATCH] clk: samsung: exynos5433: use clock_ignore_unused flag for SPI3 related clocks Andi Shyti <andi.shyti@samsung.com> - 2016-06-20 12:30 +0200
csiph-web