Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1403148

Re: ioatdma(Intel(R) I/OAT DMA Engine init failed)

Show all headers | View raw

On Wed, 2016-05-18 at 13:27 +0000, Gavin Guo wrote:
> On Tue, May 17, 2016 at 6:06 PM, Vinod Koul <vinod.koul@intel.com>
> wrote:
> > 
> > On Mon, May 16, 2016 at 06:08:20PM +0800, Gavin Guo wrote:
> > > 
> > > The following error messages can be observed on the Intel
> > > Haswell-E
> > > chipset with v3.13 kernel. After the analysis, I found there is
> > > no
> > > difference in the logic of these error messages in the current
> > > upstream kernel. I also searched the git log and can't find any
> > > commit
> > > which is fix to the error(correct me if I am wrong). The
> > > following is
> > > the detail, and I'll really appreciate if there is any comment.
> > > :)
> > 3.13 is ancient, can you check this on latest kernel
> Thank you for the comment. It's running on the production system.
> However,
> I'll try to figure out if it's possible to test the latest kernel.

I wonder if you don't have the extended PCI config space access enabled
in your kernel config. 

> 
> > 
> > 
> > > 
> > > 
> > > ioatdma 0000:00:04.0: channel error register unreachable
> > > ioatdma 0000:00:04.0: channel enumeration error
> > > ioatdma 0000:00:04.0: Intel(R) I/OAT DMA Engine init failed
> > > ioatdma 0000:00:04.1: channel error register unreachable
> > > ioatdma 0000:00:04.1: channel enumeration error
> > > ioatdma 0000:00:04.1: Intel(R) I/OAT DMA Engine init failed
> > > ...
> > > ioatdma 0000:00:04.7: channel error register unreachable
> > > ioatdma 0000:00:04.7: channel enumeration error
> > > ioatdma 0000:00:04.7: Intel(R) I/OAT DMA Engine init failed
> > > mei_me 0000:00:16.0: initialization failed.
> > > 
> > > There are 8 I/OAT DMA controllers on the Haswell-E chipset:
> > > 8086:2f20 ~ 8086:2f27
> > > 80:04.0 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 0 (rev 02)
> > > 80:04.1 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 1 (rev 02)
> > > 80:04.2 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 2 (rev 02)
> > > 80:04.3 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 3 (rev 02)
> > > 80:04.4 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 4 (rev 02)
> > > 80:04.5 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 5 (rev 02)
> > > 80:04.6 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 6 (rev 02)
> > > 80:04.7 System peripheral: Intel Corporation Haswell-E DMA
> > > Channel 7 (rev 02)
> > > 
> > > Analysis:
> > > The bug happens when the driver is resetting DMA controller, this
> > > is
> > > the sequence: The function, ioat_pci_probe, is called when the
> > > DMA
> > > controller is detected by the PCI bus. Then,
> > > ioat3_dma_probe -> ioat_probe -> ioat2_enumerate_channels ->
> > > ioat3_reset_hw. The following code can be found in the
> > > ioat3_reset_hw:
> > > 
> > > drivers/dma/ioat/dma_v3.c:
> > >         chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
> > >         writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
> > > ...
> > >         err = pci_read_config_dword(pdev,
> > > IOAT_PCI_CHANERR_INT_OFFSET, &chanerr);
> > > if (err) {
> > > dev_err(&pdev->dev,
> > > "channel error register unreachable\n");
> > > return err;
> > > }
> > > 
> > > Obviously, there are something wrong in the channel error
> > > register
> > > reset process. Then all the way back to ioat_probe(). Because the
> > > error happens, the dma->chancnt will be set to 0:
> > > 
> > > drivers/dma/ioat/dma.c:
> > >         if (!dma->chancnt) {
> > >                 dev_err(dev, "channel enumeration error\n");
> > >                 goto err_setup_interrupts;
> > >         }
> > > 
> > > Finally back to ioat_pci_probe:
> > > 
> > > drivers/dma/ioat/pci.c:
> > >                 err = ioat3_dma_probe(device, ioat_dca_enabled);
> > >         else
> > >                 return -ENODEV;
> > > 
> > >         if (err) {
> > >                 dev_err(dev, "Intel(R) I/OAT DMA Engine init
> > > failed\n");
> > >                 return -ENODEV;
> > --
> > ~Vinod

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

ioatdma(Intel(R) I/OAT DMA Engine init failed) Gavin Guo <gavin.guo@canonical.com> - 2016-05-16 12:10 +0200
  Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) Vinod Koul <vinod.koul@intel.com> - 2016-05-17 12:10 +0200
    Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) Gavin Guo <gavin.guo@canonical.com> - 2016-05-18 15:30 +0200
      Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) "Jiang, Dave" <dave.jiang@intel.com> - 2016-05-18 18:50 +0200
        RE: ioatdma(Intel(R) I/OAT DMA Engine init failed) "Jiang, Dave" <dave.jiang@intel.com> - 2016-05-19 16:50 +0200
          Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) Vinod Koul <vinod.koul@intel.com> - 2016-05-19 19:20 +0200
            RE: ioatdma(Intel(R) I/OAT DMA Engine init failed) "Jiang, Dave" <dave.jiang@intel.com> - 2016-05-19 22:20 +0200
              Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) Yinghai Lu <yinghai@kernel.org> - 2016-05-20 00:20 +0200
                Re: ioatdma(Intel(R) I/OAT DMA Engine init failed) Gavin Guo <gavin.guo@canonical.com> - 2016-05-25 09:00 +0200

csiph-web