Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1404675

Re: [PATCH v2] mmc: sdhci: fix wakeup configuration

Show all headers | View raw

On 20/05/2016 4:39 p.m., Ulf Hansson wrote:
> On 20 May 2016 at 13:46, Adrian Hunter <adrian.hunter@intel.com> wrote:
>> On 13/05/16 16:16, Ludovic Desroches wrote:
>>> Activating wakeup event is not enough to get a wakeup signal. The
>>> corresponding events have to be enabled in the Interrupt Status Enable
>>> Register too. It follows the specification and is needed at least by
>>> sdhci-of-at91.
>>>
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>>
>> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
>
> Is this material for stable and as a fix for 4.6?

Not as far as I know.

>
> Kind regards
> Uffe
>
>>
>>
>>> ---
>>>   drivers/mmc/host/sdhci.c | 15 ++++++++++++++-
>>>   1 file changed, 14 insertions(+), 1 deletion(-)
>>>
>>> Changes:
>>> - v2:
>>>    - update commit message and comments
>>>    - do not rename val and mask variables
>>>
>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>> index e010ea4..e351859 100644
>>> --- a/drivers/mmc/host/sdhci.c
>>> +++ b/drivers/mmc/host/sdhci.c
>>> @@ -2605,18 +2605,31 @@ static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
>>>   \*****************************************************************************/
>>>
>>>   #ifdef CONFIG_PM
>>> +/*
>>> + * To enable wakeup events, the corresponding events have to be enabled in
>>> + * the Interrupt Status Enable register too. See 'Table 1-6: Wakeup Signal
>>> + * Table' in the SD Host Controller Standard Specification.
>>> + * It is useless to restore SDHCI_INT_ENABLE state in
>>> + * sdhci_disable_irq_wakeups() since it will be set by
>>> + * sdhci_enable_card_detection() or sdhci_init().
>>> + */
>>>   void sdhci_enable_irq_wakeups(struct sdhci_host *host)
>>>   {
>>>        u8 val;
>>>        u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
>>>                        | SDHCI_WAKE_ON_INT;
>>> +     u32 irq_val = SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
>>> +                   SDHCI_INT_CARD_INT;
>>>
>>>        val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
>>>        val |= mask ;
>>>        /* Avoid fake wake up */
>>> -     if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
>>> +     if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) {
>>>                val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
>>> +             irq_val &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
>>> +     }
>>>        sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
>>> +     sdhci_writel(host, irq_val, SDHCI_INT_ENABLE);
>>>   }
>>>   EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
>>>
>>>
>>

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2] mmc: sdhci: fix wakeup configuration Ludovic Desroches <ludovic.desroches@atmel.com> - 2016-05-13 15:20 +0200
  Re: [PATCH v2] mmc: sdhci: fix wakeup configuration Adrian Hunter <adrian.hunter@intel.com> - 2016-05-20 14:00 +0200
    Re: [PATCH v2] mmc: sdhci: fix wakeup configuration Ulf Hansson <ulf.hansson@linaro.org> - 2016-05-20 15:40 +0200
      Re: [PATCH v2] mmc: sdhci: fix wakeup configuration Adrian Hunter <adrian.hunter@intel.com> - 2016-05-20 20:30 +0200
        Re: [PATCH v2] mmc: sdhci: fix wakeup configuration Ludovic Desroches <ludovic.desroches@atmel.com> - 2016-05-26 14:40 +0200

csiph-web