Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1273630

Re: [Linaro-acpi] [PATCH v8 5/5] Watchdog: introduce ARM SBSA watchdog driver

Show all headers | View raw

Al Stone wrote:
>>> The issue for me in that case is that the SBSA requires a two stage timeout,
>> >
>> >Hmm - really ? This makes me want to step back a bit and re-read the specification
>> >to understand where it says that, and what the reasoning might be for such a
>> >requirement.
> As far as I can tell, that's what the SBSA is requiring.  My understanding is
> that the hardware is to first assert a WS0 signal when the timer expires.  If
> the timer expires and WS0 has already been asserted, the WS1 signal is to be
> asserted.  When WS1 is asserted, the system is to do a hard reset (Section 5.2,
> "Server Base System Architecture", ARM-DEN-0029 Version 2.3).  I'm interpreting
> the occurrence of WS0 as the first stage and WS1 as the second.
>
> To me, at least, this makes sense in a server environment.  The WS0 occurs,
> which gives me some time to save key info or try to recover before WS1 occurs
> (or kexec, or any other cleverness).

I'm having some problem with the word "requires".

I think it applies only to the hardware.  That is, there must be a WS0 
timeout/event, and then after that there must be a WS1 timeout/event.

I don't think there is any "requirement" for software to do anything 
with WS0.  That's why I don't think pre-timeout is necessary for the 
driver to be SBSA-compliant.  All of the drivers for existing two-stage 
watchdog devices treat the device as a one-stage device, because the 
watchdog API does not support pre-timeout.  Are all of them also 
"broken"?  No.  So it would not be broken for an SBSA watchdog driver to 
ignore WS0.

I would have no problem with the following sequence of events:

1) We merge in a driver that treats the SBSA watchdog as a single-stage 
watchdog that does a hard reset at WS1 and ignores WS0.  My driver, with 
a few changes, would qualify.

2) We add support for pre-timeout to the Watchdog interface.  Fu can 
take all the time in the world (as far as I'm concerned) getting this 
perfected.  My only request is that the new pre-timeout API supports 
hardware where the timeout between stages must be equal.  That is, if 
timeout to stage 1 (call it T1) is X seconds, then the timeout to stage 
2 (call it T2) is another X seconds.  T2 = T1.  Of course, the API 
should also support hardware where T2 != T1.

3) The existing SBSA watchdog driver is updated to support the new 
pre-timeout API.  It would enforce the requirement that T2 = T1.

This approach will allow us to get a working SBSA watchdog driver into 
4.5 without much fuss.

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [Linaro-acpi] [PATCH v8 5/5] Watchdog: introduce ARM SBSA  watchdog driver Al Stone <al.stone@linaro.org> - 2015-11-20 01:20 +0100
  Re: [Linaro-acpi] [PATCH v8 5/5] Watchdog: introduce ARM SBSA  watchdog driver Timur Tabi <timur@codeaurora.org> - 2015-11-20 01:30 +0100

csiph-web