[PATCH v2 00/23] HiSilicon SAS v2 hw support

From	j00310691 <john.garry@huawei.com>
Newsgroups	linux.kernel
Subject	[PATCH v2 00/23] HiSilicon SAS v2 hw support
Date	2016-01-25 18:20 +0100
Message-ID	<qUSOl-7cE-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

From: John Garry <john.garry@huawei.com>

This patchset introduces support for the HiSi SAS v2 hw.
The major difference between v1 and v2 hw is support
for SATA/STP.

Known limitation:
- We cannot connect a SATA disk through an expander
  which enables DMA setup auto-activate, as our controller
  does not support this feature. Directly connecting
  a SATA disk to the HBA is ok.

Differences to v1:
- Update dt bindings, specificially for am-max-transmissions
- some small SATA fixes
- minor formatting changes

John Garry (23):
  devicetree: bindings: hisi_sas: add v2 HW bindings
  hisi_sas: relocate DEV_IS_EXPANDER
  hisi_sas: set max commands as configurable
  hisi_sas: reduce max itct entries
  hisi_sas: add hisi_sas_err_record_v1
  hisi_sas: rename some fields in hisi_sas_itct
  hisi_sas: add bare v2 hw driver
  hisi_sas: add v2 register definitions
  hisi_sas: add v2 hw init
  hisi_sas: add init_id_frame_v2_hw()
  hisi_sas: add v2 phy init code
  hisi_sas: add v2 int init and phy up handler
  hisi_sas: add v2 phy down handler
  hisi_sas: add v2 channel interrupt handler
  hisi_sas: add v2 SATA interrupt handler
  hisi_sas: add v2 cq interrupt handler
  hisi_sas: add v2 path to send ssp frame
  hisi_sas: add v2 code to send smp command
  hisi_sas: add v2 code for itct setup and free
  hisi_sas: add v2 path to send ATA command
  hisi_sas: add v2 slot error handler
  hisi_sas: add v2 tmf functions
  hisi_sas: update driver version to 1.1

 .../devicetree/bindings/scsi/hisilicon-sas.txt     |   21 +-
 drivers/scsi/hisi_sas/Kconfig                      |    1 +
 drivers/scsi/hisi_sas/Makefile                     |    2 +-
 drivers/scsi/hisi_sas/hisi_sas.h                   |   39 +-
 drivers/scsi/hisi_sas/hisi_sas_main.c              |   36 +-
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c             |   20 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c             | 2205 ++++++++++++++++++++
 7 files changed, 2278 insertions(+), 46 deletions(-)
 create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c

Reviewed-by: Hannes Reinecke <hare@suse.com>
-- 
1.9.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 00/23] HiSilicon SAS v2 hw support  j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  [PATCH v2 15/23] hisi_sas: add v2 SATA interrupt handler j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  [PATCH v2 13/23] hisi_sas: add v2 phy down handler j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  [PATCH v2 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
    Re: [PATCH v2 01/23] devicetree: bindings: hisi_sas: add v2 HW  bindings Rob Herring <robh@kernel.org> - 2016-01-25 20:40 +0100
  [PATCH v2 17/23] hisi_sas: add v2 path to send ssp frame j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  [PATCH v2 21/23] hisi_sas: add v2 slot error handler j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  [PATCH v2 14/23] hisi_sas: add v2 channel interrupt handler j00310691 <john.garry@huawei.com> - 2016-01-25 18:20 +0100
  Re: [PATCH v2 00/23] HiSilicon SAS v2 hw support John Garry <john.garry@huawei.com> - 2016-01-25 18:30 +0100

csiph-web