Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #162001
| From | Gary Roach <gary719_list1@verizon.net> |
|---|---|
| Newsgroups | linux.debian.user |
| Subject | Re: Stretch installation boots to read only(SOLVED) |
| Date | 2015-12-22 21:40 +0100 |
| Message-ID | <qIBSW-e4-11@gated-at.bofh.it> (permalink) |
| References | (1 earlier) <qIlO9-6X3-1@gated-at.bofh.it> <qIm7v-75a-17@gated-at.bofh.it> <qInwB-84N-5@gated-at.bofh.it> <qIq1s-14E-13@gated-at.bofh.it> <qIrAe-2af-31@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Thanks all; The corrections in fstab fixed all of the problems. Thanks for the tip to get rid of ConsoleKit. That said, what caused this problem. I did not edit the fstab file during upgrade and the system was working just fine before. Is this a bug in the upgrade process? I have seen several other web questions on the same problem. I had the same problem when I upgraded to jessie. That time I ended up reinstalling the whole system since it needed a good housecleaning anyway. Gary R. On 12/22/2015 01:14 AM, anxiousmac@gmail.com wrote: > On Tuesday, 22 December 2015 08:00:05 UTC, Gary Roach wrote: >> OK >> >> systemctl --failed gives >> root@supercrunch:/etc# systemctl --failed >> UNIT LOAD ACTIVE SUB DESCRIPTION >> ● anacron.service loaded failed failed Run anacron jobs >> ● apache2.service loaded failed failed LSB: Apache2 >> web server >> ● autofs.service loaded failed failed Automounts >> filesystems on demand >> ● colord.service loaded failed failed Manage, >> Install and Generate Color Profiles >> ● console-kit-log-system-start.service loaded failed failed Console >> System Startup Logging >> ● exim4.service loaded failed failed LSB: exim >> Mail Transport Agent >> ● munin-node.service loaded failed failed Munin Node >> ● postgresql@9.1-main.service loaded failed failed PostgreSQL >> Cluster 9.1-main >> ● postgresql@9.4-main.service loaded failed failed PostgreSQL >> Cluster 9.4-main >> ● systemd-hostnamed.service loaded failed failed Hostname Service >> ● systemd-tmpfiles-setup.service loaded failed failed Create >> Volatile Files and Directories >> ● systemd-update-utmp.service loaded failed failed Update UTMP >> about System Boot/Shutdown >> >> LOAD = Reflects whether the unit definition was properly loaded. >> ACTIVE = The high-level unit activation state, i.e. generalization of SUB. >> SUB = The low-level unit activation state, values depend on unit type. >> >> 12 loaded units listed. Pass --all to see loaded but inactive units, too. >> To show all installed unit files use 'systemctl list-unit-files'. >> >> And fstab: >> # /etc/fstab: static file system information. >> # >> # Use 'blkid' to print the universally unique identifier for a >> # device; this may be used with UUID= as a more robust way to name devices >> # that works even if disks are added and removed. See fstab(5). >> # >> # <file system> <mount point> <type> <options> <dump> <pass> >> # / was on /dev/sda1 during installation >> /dev/sda1 / ext4 rw noatime 0 1 >> # UUID=3b06b2a3-6daa-4b9f-983b-84501950bc9c / ext4 rw, noatime >> 0 1 >> # swap was on /dev/sda5 during installation >> /dev/sda5 none swap sw 0 0 >> # UUID=0a63cffb-6edb-4d5c-a1f6-a2438d4a7745 none swap >> sw 0 0 >> /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0 >> >> This didn't work with the UUID's either. >> >> And the mount -a error is: >> root@supercrunch:/etc# mount -a >> mount: /etc/fstab: parse error: ignore entry at line 9. >> >> I think that covers everything. I went through the apt-get process until >> no more files needed updating. Ran apt-get check etc. Nothing showed up. >> >> Gary R. > /etc/fstab uses spaces to separate the fields. There may, once upon a time, have been a good reason for that design decision. > > So your line: > > /dev/sda1 / ext4 rw noatime 0 1 > > needs the space between rw and noatime to be replaced by a comma and no space. > > As Marc pointed out above. > > anxiousmac > >
Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Stretch installation boots to read only Gary Roach <gary719_list1@verizon.net> - 2015-12-22 02:10 +0100
Re: Stretch installation boots to read only Sven Hartge <sven@svenhartge.de> - 2015-12-22 04:30 +0100
Re: Stretch installation boots to read only Marc Shapiro <marcnshap@gmail.com> - 2015-12-22 04:50 +0100
Re: Stretch installation boots to read only Sven Hartge <sven@svenhartge.de> - 2015-12-22 06:20 +0100
Re: Stretch installation boots to read only Gary Roach <gary719_list1@verizon.net> - 2015-12-22 09:00 +0100
Re: Stretch installation boots to read only Felix Miata <mrmazda@earthlink.net> - 2015-12-22 10:20 +0100
Re: Stretch installation boots to read only anxiousmac@gmail.com - 2015-12-22 10:40 +0100
Re: Stretch installation boots to read only(SOLVED) Gary Roach <gary719_list1@verizon.net> - 2015-12-22 21:40 +0100
Re: Stretch installation boots to read only(SOLVED) Sven Hartge <sven@svenhartge.de> - 2015-12-22 22:30 +0100
consolekit in jessie (Re: Stretch installation boots to read only) Michael Biebl <biebl@debian.org> - 2015-12-22 12:50 +0100
csiph-web