Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #27983

Re: Gerbv

From Dimiter_Popoff <dp@tgi-sci.com>
Newsgroups comp.arch.embedded
Subject Re: Gerbv
Date 2018-08-19 13:09 +0300
Organization TGI
Message-ID <plbfkp$i70$1@dont-email.me> (permalink)
References (3 earlier) <yyD*SqC3w@news.chiark.greenend.org.uk> <pl7ek0$g3s$1@dont-email.me> <zyD*wnG3w@news.chiark.greenend.org.uk> <pl9kkf$qg4$1@dont-email.me> <pla6r8$k8$1@gioia.aioe.org>

Show all headers | View raw

On 19.8.2018 г. 01:33, Chris wrote:
> On 08/18/18 18:22, Dimiter_Popoff wrote:
>
>
>>
>> Somewhat remotely related but while on a mechanical wave perhaps
>> someone would weigh in as to how to weld PT100 leads to teflon
>> wire. Soldering is not an option, they work around 300C and if
>> they lose feedback etc. they could get to 400. Well at 400 the
>> joint will not be the only victim but still.
>> Any experiences?
>>
>
> Do search on "pulse arc welder". Used for very thin wire welding,
> thermocouples etc...
>
>
> Chris
>

Thanks, I think I get it how it is done now. Not sure I'll buy
such a welder though, I only need a few welded for now.

Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Gerbv gnuarm.deletethisbit@gmail.com - 2018-08-16 12:22 -0700
  Re: Gerbv Chris <c@b.a> - 2018-08-17 11:52 +1000
    Re: Gerbv gnuarm.deletethisbit@gmail.com - 2018-08-16 21:58 -0700
      Re: Gerbv Jack <jack4747@gmail.com> - 2018-08-16 22:41 -0700
      Re: Gerbv Chris <c@b.a> - 2018-08-17 17:28 +1000
  Re: Gerbv Theo Markettos <theom+news@chiark.greenend.org.uk> - 2018-08-17 12:34 +0100
    Re: Gerbv Tim <tim@bugblat.invalid> - 2018-08-17 14:27 +0100
      Re: Gerbv Theo Markettos <theom+news@chiark.greenend.org.uk> - 2018-08-17 19:15 +0100
        Re: Gerbv Tim <tim@bugblat.invalid> - 2018-08-17 22:27 +0100
          Re: Gerbv Theo Markettos <theom+news@chiark.greenend.org.uk> - 2018-08-18 13:13 +0100
            Re: Gerbv Dave Nadler <drn@nadler.com> - 2018-08-18 08:27 -0700
            Re: Gerbv Dimiter_Popoff <dp@tgi-sci.com> - 2018-08-18 20:22 +0300
              Re: Gerbv Chris <xxx.syseng.yyy@gfsys.co.uk> - 2018-08-18 23:33 +0100
                Re: Gerbv Dimiter_Popoff <dp@tgi-sci.com> - 2018-08-19 13:09 +0300
                Re: Gerbv Chris <xxx.syseng.yyy@gfsys.co.uk> - 2018-08-19 23:30 +0100
                Re: Gerbv Dimiter_Popoff <dp@tgi-sci.com> - 2018-08-20 01:44 +0300
                Re: Gerbv Chris <xxx.syseng.yyy@gfsys.co.uk> - 2018-08-20 01:12 +0100
                Re: Gerbv Dimiter_Popoff <dp@tgi-sci.com> - 2018-08-20 12:58 +0300
                Re: Gerbv Chris <xxx.syseng.yyy@gfsys.co.uk> - 2018-08-20 13:55 +0100
                Re: Gerbv lasselangwadtchristensen@gmail.com - 2018-08-21 11:22 -0700
    Re: Gerbv gnuarm.deletethisbit@gmail.com - 2018-08-17 07:37 -0700

csiph-web