Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.arch.embedded > #26339
| From | Tauno Voipio <tauno.voipio@notused.fi.invalid> |
|---|---|
| Newsgroups | comp.arch.embedded |
| Subject | Re: L298 PWM Problem |
| Date | 2017-03-29 18:58 +0300 |
| Organization | A noiseless patient Spider |
| Message-ID | <obgld5$8hq$1@dont-email.me> (permalink) |
| References | (1 earlier) <obatgd$mnq$1@dont-email.me> <q7ydnQ8IucYK30TFnZ2dnUU7-fWdnZ2d@giganews.com> <-_WdnZ8_Oa3YCkbFnZ2dnUU7-WHNnZ2d@giganews.com> <obg5vd$j83$1@dont-email.me> <DN2dnXFUrZB7P0bFnZ2dnUU7-bPNnZ2d@giganews.com> |
On 29.3.17 15:04, engineergc wrote: >> On 29.3.17 14:15, engineergc wrote: >> >>> P1.1>>IN1 >>> P1.2>>IN2 >>> P1.3>>IN3 >>> P1.4>>IN4 >>> P1.6>>ENA&ENB(I connected pwm output to both ENA and ENB pins of L298 >>> motor driver card. >>> Also Motor outputs are connected to OUT1,OUT2,OUT3 and OUT4 connectors > as >>> respectively. >>> Then, GND of MSP430 and gnd of 9V battery are connected to GND > connector >>> of L298. >>> >>> This code can turn motor(motor that connected to OUT1 and OUT2) as >>> fastly. But if I try to turn other motor with this code, motor can not >>> turn. >>> I connected to pwm output P1.2 to ENB and P1.1 to IN3 and P1.3 to IN4. >>> I spend many time to find my error. Why I can not turn 2 motors >>> simultaneously with PWM? Where is my fault? Could you help me please? >> >> 1. Are you attempting to run two motors and the processor from a single >> 9V battery (IEC 6F22)? >> >> 2. Have you noticed that the MSP processor has to have an output high >> voltage at most L298 voltage feed - 2.5V? >> > I fed MSP430 from computer via USB and I fed two motors from single 9V > battery. The IEC 6F22 battery is probably too small to run even a single motor reliably, lest two. Have you tried to run both motors together from the single battery at the same time? -- -TV
Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-26 22:49 -0500
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-26 23:07 -0500
Re: L298 PWM Problem Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2017-03-27 14:39 +0300
Re: L298 PWM Problem Tim Wescott <tim@seemywebsite.com> - 2017-03-27 11:49 -0500
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-29 06:15 -0500
Re: L298 PWM Problem Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2017-03-29 14:34 +0300
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-29 07:00 -0500
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-29 07:04 -0500
Re: L298 PWM Problem Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2017-03-29 18:58 +0300
Re: L298 PWM Problem Tim Wescott <tim@seemywebsite.com> - 2017-03-29 11:19 -0500
Re: L298 PWM Problem Tim Wescott <tim@seemywebsite.com> - 2017-03-29 11:32 -0500
Re: L298 PWM Problem Tim Wescott <tim@seemywebsite.com> - 2017-03-27 11:50 -0500
Re: L298 PWM Problem Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2017-03-27 21:12 +0300
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-29 05:52 -0500
Re: L298 PWM Problem "engineergc" <116985@EmbeddedRelated> - 2017-03-29 06:22 -0500
csiph-web