Linux embedded plus small TFT: ready-to-use solution

From	pozz <pozzugno@gmail.com>
Newsgroups	comp.arch.embedded
Subject	Linux embedded plus small TFT: ready-to-use solution
Date	2016-09-08 01:16 +0200
Organization	A noiseless patient Spider
Message-ID	<nqq73s$vm6$1@dont-email.me> (permalink)

Show all headers | View raw

I need to develop a product based on Linux embedded (because I need to 
communicate with a 4G modem through USB and I have the drivers for Linux).

So I'm searching an almost ready-to-use solution for this product (I 
should minimize design cost even if this increases the price of a single 
product... I will produce only 10-20 pieces at the moment).

The system should have only a USB host port (for 4G modem) and a small 
(2.8-4.3") display TFT with resistive touch panel.
The display should be mounted on a panel.

The best would be to have a SOM solution, so I can design my simple and 
custom carrier board where to mount the SOM, the 4G modem, power supply 
and so on.
However I could use a complete (with connector) board (I'll interface it 
with a my custom board).

The most important thing: I don't want to waste too much time to make 
Linux and display running. I'd like to write only the final application. 
Linux and display should run from the beginning.

The GUI will be very simple: only about 10 different screens with some 
settigs and status info.  No more.

Any suggestion?

Back to comp.arch.embedded | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Linux embedded plus small TFT: ready-to-use solution pozz <pozzugno@gmail.com> - 2016-09-08 01:16 +0200
  Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-07 16:54 -0700
    Re: Linux embedded plus small TFT: ready-to-use solution Jack <jack4747@gmail.com> - 2016-09-08 02:24 -0700
      Re: Linux embedded plus small TFT: ready-to-use solution Jack <jack4747@gmail.com> - 2016-09-08 02:25 -0700
        Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-08 09:06 -0700
          Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-08 09:15 -0700
    Re: Linux embedded plus small TFT: ready-to-use solution pozz <pozzugno@gmail.com> - 2016-09-09 00:24 +0200
      Re: Linux embedded plus small TFT: ready-to-use solution Paul Rubin <no.email@nospam.invalid> - 2016-09-08 16:32 -0700
        Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-08 17:15 -0700
          Re: Linux embedded plus small TFT: ready-to-use solution lasselangwadtchristensen@gmail.com - 2016-09-08 17:24 -0700
          Re: Linux embedded plus small TFT: ready-to-use solution Paul Rubin <no.email@nospam.invalid> - 2016-09-08 18:22 -0700
            Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-08 18:39 -0700
              Re: Linux embedded plus small TFT: ready-to-use solution Paul Rubin <no.email@nospam.invalid> - 2016-09-08 19:03 -0700
                Re: Linux embedded plus small TFT: ready-to-use solution edward.ming.lee@gmail.com - 2016-09-08 20:10 -0700
        Re: Linux embedded plus small TFT: ready-to-use solution pozz <pozzugno@gmail.com> - 2016-09-10 23:18 +0200
          Re: Linux embedded plus small TFT: ready-to-use solution Paul Rubin <no.email@nospam.invalid> - 2016-09-10 15:43 -0700

csiph-web