Compaq CQ60-313SA Bios Recovery

From	mysticmelon <mysticmelon.4wk5gr@no.email.invalid>
Newsgroups	comp.sys.laptops
Subject	Compaq CQ60-313SA Bios Recovery
Date	2011-07-07 08:00 -0500
Message-ID	<mysticmelon.4wk5gr@no.email.invalid> (permalink)
Organization	NNTPGW

Show all headers | View raw

Hello
Apologies if I am breaking any rules by starting this thread, I am new.
Also, sorry for the long post, but I explain my entire progress on
recovering this laptop.

I am trying to learn how to recovery my laptop from a bad bios flash.
I'm sure there have been many threads about this before, however im not
sure that anyone has tried with my particular laptop model, after many
hours of searching. 

The laptop model is: compaq presario cq60-313sa. The problem began
during a bios update in windows. The update froze halfway through. This
leads me to believe that there is a bios corruption and not a graphical
problem, however I may be mistaken.

Research reveals that there are methods of recovering from this problem,
i.e.something called a crisis recovery mode which can be initiated by
removing the battery and power cable, performing a hard reset by holding
the power button down for at least 15 seconds, and then holding winkey +
B and re-inserting the power cable. This works on this laptop, if I
insert the power cable and then press the power button three times.

In CRM mode, I get a loud beep code. It is one long beep and two short
beeps. Research reveals that this is the sign of a graphical error,
according to beep code tables I've seen for compaq laptops. This
contradicts my theory that it is a bios corruption. Thus I decided to
carry on with attempting to recover my bios. 

I downloaded the latest winphlash bios update from the HP website and
extracted it to a folder on my desktop pc. I found the file
"360AF54.WPH" (this is apparently the bios file) in the extracted folder
and copied to to a usb pen that I have formatted to FAT16. I renamed the
file to "360A.BIN" and copied it, an made another one called "360D.BIN".
This changes the file extension to .bin. I did this because I read a
thread online with success stories where they renamed the file using
this formula.

After inserting the usb pen with these files on it, into the usb slot in
the left side of the laptop, and then booting using the crisis recovery
mode method explained above, it does NOT beep this time, the usb pen
displays "connected" on its lcd screen instead of "disconnected /
charging" like it usually does when i dont use crisis recovery mode. The
laptop only has the power button led, the wireless led, and the power
led where the three led's are for power, charging and hard drive. The
laptop then sits for 10 minutes and then beeps using the same beep code.
The wireless LED then goes off and the laptop sits repeating the same
thing. This is as far as I have gotten with my progress.

If anyone has any ideas, or if anyone thinks I should give up, please
let me know

cheers!

Back to comp.sys.laptops | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Compaq CQ60-313SA Bios Recovery mysticmelon <mysticmelon.4wk5gr@no.email.invalid> - 2011-07-07 08:00 -0500
  Re: Compaq CQ60-313SA Bios Recovery mysticmelon <mysticmelon.4wk5gs@no.email.invalid> - 2011-07-07 08:03 -0500
  Re: Compaq CQ60-313SA Bios Recovery BillW50 <BillW50@aol.kom> - 2011-07-09 12:47 -0500

csiph-web