Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.sys.raspberry-pi > #8960
| From | rickman <gnuarm@gmail.com> |
|---|---|
| Newsgroups | comp.sys.raspberry-pi |
| Subject | Re: mechanical dimensions |
| Date | 2015-06-22 21:37 -0400 |
| Organization | A noiseless patient Spider |
| Message-ID | <mmad60$ao4$1@dont-email.me> (permalink) |
| References | <cuqhn7F7u8qU1@mid.individual.net> |
On 6/22/2015 9:43 AM, Stefan Krister wrote: > Hi, > > I'm developing a 19" rack mount "case" in OpenSCAD for the Raspberry Pi > 2 Model B. I would like to have the mechanical dimensions to put the > holes and cutouts at the right places. The only thing I found are > measurements from the top but not from the side or front/back. This is one of many reasons why the rPi is not a good choice to use in any commercial product. It just is not specified enough to count on any aspect of it remaining constant over the life of a product it is used in. Of course you didn't say you were using it in a commercial product. In that case I would think the one accurate mechanical drawing available and your own measurements should suffice. When I searched for this info I found the images were most important, so I did an image search. I found the heights of the top side connectors easily. The bottom side components were no so easy to find. Fortunately they were no so important to me. -- Rick
Back to comp.sys.raspberry-pi | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-22 15:43 +0200
Re: mechanical dimensions Tomasz Torcz <zdzichu@irc.-spamu.nie.chce-.pl> - 2015-06-22 17:08 +0000
Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:56 +0200
Re: mechanical dimensions rickman <gnuarm@gmail.com> - 2015-06-22 21:37 -0400
Re: mechanical dimensions Andy Burns <usenet.feb2014@adslpipe.co.uk> - 2015-06-23 07:22 +0100
Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:55 +0200
Re: mechanical dimensions Stefan Krister <stefan.krister@creative.chaos.de> - 2015-06-24 08:59 +0200
Re: mechanical dimensions Theo Markettos <theom+news@chiark.greenend.org.uk> - 2015-06-24 18:18 +0100
Re: mechanical dimensions Martin Gregorie <martin@address-in-sig.invalid> - 2015-06-24 22:33 +0000
Re: mechanical dimensions rickman <gnuarm@gmail.com> - 2015-06-24 18:07 -0400
csiph-web