Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #32066

Re: Wireless UART for debug purposes

Show all headers | View raw

Am 20.11.2023 um 08:29 schrieb pozz:
> Il 14/11/2023 19:47, Hans-Bernhard Bröker ha scritto:
>> Am 13.11.2023 um 09:10 schrieb pozz:
>>
>>> However, in some cases, the device is installed far from a PC and 
>>> it's difficult to have USB wired cable connection. 
>>
>> Define "far", 
> 
> 10-15 meters should be ok
> 
>> and "UART"
> 
> Standard TX and RX asynchronous signals as in RS232 standard, but at 
> UART low level voltages (3.3V or 5V). Baudrates that I often use are the 
> standard from 9600bps up to 115.2kbps.

Then you need an active device that shifts and boosts signal levels, a 
good deal closer to the machine in question.  A MAX232 equivalent in a 
box small enough to count as a plug casing would probably do it.

> The problem with a long cable is often the position of the device that 
> is uncomfortable to reach. 

"Uncomfortable" should only rule out doing that for use cases at or 
below the urgency of "nice-to-have."

Or, to put it differently: if you can't even get there with a suitable 
plug attached to some thin-ish cable, that puts the situation beyond 
"uncomfortable," into the realm of "practically impossible to use."

Back to comp.arch.embedded | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Wireless UART for debug purposes pozz <pozzugno@gmail.com> - 2023-11-13 09:10 +0100
  Re: Wireless UART for debug purposes David Brown <david.brown@hesbynett.no> - 2023-11-13 10:00 +0100
    Re: Wireless UART for debug purposes pozz <pozzugno@gmail.com> - 2023-11-13 10:39 +0100
      Re: Wireless UART for debug purposes David Brown <david.brown@hesbynett.no> - 2023-11-13 13:15 +0100
        Re: Wireless UART for debug purposes pozz <pozzugno@gmail.com> - 2023-11-13 13:46 +0100
          Re: Wireless UART for debug purposes David Brown <david.brown@hesbynett.no> - 2023-11-13 15:33 +0100
        Re: Wireless UART for debug purposes Theo <theom+news@chiark.greenend.org.uk> - 2023-11-13 14:35 +0000
  Re: Wireless UART for debug purposes Hans-Bernhard Bröker <HBBroeker@gmail.com> - 2023-11-14 19:47 +0100
    Re: Wireless UART for debug purposes "Peter Heitzer" <peter.heitzer@rz.uni-regensburg.de> - 2023-11-15 08:16 +0000
      Re: Wireless UART for debug purposes pozz <pozzugno@gmail.com> - 2023-11-20 08:29 +0100
    Re: Wireless UART for debug purposes pozz <pozzugno@gmail.com> - 2023-11-20 08:29 +0100
      Re: Wireless UART for debug purposes Hans-Bernhard Bröker <HBBroeker@gmail.com> - 2023-11-20 17:34 +0100

csiph-web