Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #11068

Re: Using Fit to interpolate data

From Kris Carlson <carlsonkw@gmail.com>
Newsgroups comp.soft-sys.math.mathematica
Subject Re: Using Fit to interpolate data
Date 2012-07-25 06:35 +0000
Message-ID <juo43t$18f$1@smc.vnet.net> (permalink)
References <jullkd$ptc$1@smc.vnet.net> <500EA086.2050907@KevinMcCann.com>
Organization Time-Warner Telecom

Show all headers | View raw


On Tue, Jul 24, 2012 at 9:17 AM, Kevin J. McCann <kjm@kevinmccann.com>wrote:

> A couple of comments:
>
> 1) Fit performs a linear least squares fit; so, you initially did a
> straight line fit. Do you have any reason/theory to suggest that it should
> be so? Your data appear to suggest an exponential relationship.
>
> 2) The goodness of the fit depends on the goodness of the data set. Do you
> have error bounds on the data points?
>
> Also, you might comment on why you want to do the fit in the first place.
> For example, are you going to do subsequent calculations with the fit? Are
> the fit parameters relevant? ...
>
> Kevin
>
> On 7/24/2012 4:16 AM, Kris Carlson wrote:
>
>> Hi,
>>
>> Can someone enlighten me about how to fit a curve to data? These data are
>> of the density of axons of given diameters in the spinal cord. The density
>> of smaller fibers is dramatically larger than that of larger fibers. There
>> cannot be density < 0 of any diameter, so heuristically to prevent a fit
>> yielding an equation that dips below 0 I added an end point with fiber
>> diameter = 16 that is 0. Then using Fit I try to increase the exponent of
>> x
>> until the curve doesn't yield negative values. The fit looks good in large
>> scale but when I plot the region of greatest interest, 8 < x < 14, it no
>> longer looks so good. Maybe I am simply ignorant about fitting a curve to
>> somewhat irregular data? Or can it be done?
>>
>> Thank you.
>>
>> Kris
>>
>> fiberDataDensitiesFeierabend = {{16, 0}, {10.7, 0.11}, {10.4,
>>      0.19}, {9.77, 0.41}, {8.29, 3.05}, {7.14, 19.86}};
>>
>> fbddPlot =
>>   ListPlot[**fiberDataDensitiesFeierabend,
>>    PlotMarkers -> {Automatic, Medium}]
>>
>> fbddFit = Fit[**fiberDataDensitiesFeierabend, {1, x, x^-13}, x]
>>
>> Show[Plot[fbddFit, {x, 4, 20},
>>    PlotRange -> {{4.5, 20}, {-0.5, 25}}], fbddPlot]
>>
>> Show[Plot[fbddFit, {x, 4, 28},
>>    PlotRange -> {{8, 16}, {-0.5, 1}}], fbddPlot]
>>
>>
>>  Kevin, I started with a low order polynomial, not linear, then advanced
> the order to get a better fit. Today made some progress by omitting the
> other terms and just using ax^-13; so in the range I need,  the following
> works pretty well. Sorry I didn't give the big picture, which is I need to
> translate (interpolate) from Feirabend's fiber diameters to another group's
> (Lee's).


In[131]:= fiberDataLeeDiameters = fiberDataLee[[All, 1]]

Out[131]= {25, 14, 12.8, 11.5, 8.7, 7.5, 5.7}

 In[277]:= fbddFit = Fit[fiberDataDensitiesFeierabend, {x^-13}, x]

Out[277]= 2.4929*10^12/x^13

Kris

Back to comp.soft-sys.math.mathematica | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

Using Fit to interpolate data Kris Carlson <carlsonkw@gmail.com> - 2012-07-24 08:16 +0000
  Re: Using Fit to interpolate data Kris Carlson <carlsonkw@gmail.com> - 2012-07-25 06:35 +0000
  Re: Using Fit to interpolate data Kris Carlson <carlsonkw@gmail.com> - 2012-07-25 06:36 +0000
  Re: Using Fit to interpolate data "Kevin J. McCann" <kjm@KevinMcCann.com> - 2012-07-25 06:37 +0000
  Re: Using Fit to interpolate data "Kevin J. McCann" <kjm@KevinMcCann.com> - 2012-07-25 06:35 +0000
  Re: Using Fit to interpolate data "Kevin J. McCann" <kjm@KevinMcCann.com> - 2012-07-26 07:36 +0000

csiph-web