Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #9872

Re: Controlling scale of Graphics on paper

From Joseph Gwinn <joegwinn@comcast.net>
Newsgroups comp.soft-sys.math.mathematica
Subject Re: Controlling scale of Graphics on paper
Date 2012-04-29 06:14 +0000
Organization Steven M. Christensen and Associates, Inc and MathTensor, Inc.
Message-ID <jnim7m$aml$1@smc.vnet.net> (permalink)
References <jmtd9i$sim$1@smc.vnet.net> <jndtpo$jm0$1@smc.vnet.net>

Show all headers | View raw


In article <jndtpo$jm0$1@smc.vnet.net>,
 Szabolcs Horvát <szhorvat@gmail.com> wrote:

> On 2012.04.21. 6:32, Joseph Gwinn wrote:
> > I would like to use Mathematica to make printed templates of various
> > kinds.
> >
> > In one use, a complicated shape is generated mathematically and
> > displayed using Graphics or Show, the plot is printed on paper, the
> > paper is glued to a piece of wood, which is cut and drilled to the lines
> > and center-points.  This requires the ability to control the on-paper
> > scale factor, so that a length of 1.0 in a line ends up being one inch
> > (or one centimeter) on paper.
> >
> > I assume that this is possible, but have not found anything relevant in
> > the online documentation.  What I have done is used Mathematica to make
> > dolls of machine parts; in this case it was sufficient that all be in
> > the same scale, which was achieved using ImageSize->72*6 directives, but
> > ImageSize doesn't speak directly to the issue of scale on paper.
> >
> > It may be that ImageSize->{w,h} can be used, but there is some math
> > required.
> >
> > So, my question is how best to achieve a specified scale on paper.
> >
> 
> You got several suggestions.  One thing that hasn't been mentioned yet 
> is exporting to DXF.
> 
> DXF is a CAD-specific format, so there's support for printing to exact 
> scales.  First export to DXF, then open it with a CAD program or a DXF 
> viewer and print to a precise scale.  I think this will fit your 
> application best.
> 
> If you are going to go the PDF route, this might be valuable (similar to 
> other suggestions):
> 
> http://mathematica.stackexchange.com/a/750/12
> 
> You'll need to get rid of any PlotRangePadding and ImageMargins too, if 
> you choose this route.

Hmm.  I do have a CAD program (Alibre), and it does understand DXF (of 
course), but that's a whole new world.  

I was hoping for a simpler solution, in Mathematica only, for 
non-precision and one-off applications.  One would hope and assume that 
Mathematica can do this natively.

But it's a good idea nonetheless, for more complex jobs.

Joe Gwinn

Back to comp.soft-sys.math.mathematica | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

Controlling scale of Graphics on paper Joseph Gwinn <joegwinn@comcast.net> - 2012-04-21 04:32 +0000
  Re: Controlling scale of Graphics on paper Yves Klett <yves.klett@googlemail.com> - 2012-04-23 09:43 +0000
    Re: Controlling scale of Graphics on paper Yves Klett <yves.klett@googlemail.com> - 2012-04-24 09:32 +0000
      Re: Controlling scale of Graphics on paper Joseph Gwinn <joegwinn@comcast.net> - 2012-04-26 09:27 +0000
  Re: Controlling scale of Graphics on paper Szabolcs Horvát <szhorvat@gmail.com> - 2012-04-27 10:52 +0000
    Re: Controlling scale of Graphics on paper Joseph Gwinn <joegwinn@comcast.net> - 2012-04-29 06:14 +0000

csiph-web