Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #8115

Re: Slow plotting of reflected parametric "butterflies"

From Chris Young <cy56@comcast.net>
Newsgroups comp.soft-sys.math.mathematica
Subject Re: Slow plotting of reflected parametric "butterflies"
Date 2012-01-23 07:59 +0000
Organization Steven M. Christensen and Associates, Inc and MathTensor, Inc.
Message-ID <jfj41g$7d2$1@smc.vnet.net> (permalink)
References <jf8ql4$3pl$1@smc.vnet.net> <jfgva3$ph4$1@smc.vnet.net>

Show all headers | View raw


On 2012-01-22 12:26:43 +0000, Bill Rowe said:

> On 1/21/12 at 5:20 AM, cy56@comcast.net (Chris Young) wrote:
>
>> I'm thinking that it's much safer programming style to always
>> isolate any functions using Set (rather than SetDelayed) inside a
>> module; otherwise aren't there "exposed" global variables? If these
>> get assigned some value, wouldn't the function be broken?
>
> I don't agree using Set is any safer/riskier than SetDelayed.
> But I do agree it is important to understand the difference
> between them and when each is appropriate.
>
> Localizing variables inside Module clearly isolates them from
> the external environment. But Module localizes variables by
> creating new variables which can cause unexpected difficulties.
>
> That is:
>
> In[1]:= a = 2;
> {Module[{a = 4}, {Names["a*"], 4}], a}
>
> Out[2]= {{{a,a$2093},4},2}
>
> Contrast that with
>
> In[1]:= a = 2;
> {Block[{a = 4}, {Names["a*"], 4}], a}
>
> Out[2]= {{{a},4},2}

But I can't use Block for my purposes. I can't define the MSeg
function. All I get is the lines at the top and bottom. So I'm hoping
that using Module where Block is below is OK. The other solution would
seem to be to Clear any variables in a Set function. So you'd want to
make sure you didn't need them.

Manipulate[
 Block[
  {
   \[ScriptCapitalA] = {Ax, Ay, Az}, \[ScriptCapitalB] = {Bx, By,
     Bz}, \[ScriptCapitalC] = {Cx, Cy, Cz}, \[ScriptCapitalD] = {Dx,
     Dy, Dz},
   \[ScriptCapitalP], \[ScriptCapitalQ], n, k, t
   },

  (* points riding along the "rails" \[ScriptCapitalA]\
\[ScriptCapitalC] and \[ScriptCapitalB]\[ScriptCapitalD]: *)
  \
\[ScriptCapitalP][n_] = (1 - n) \[ScriptCapitalA] +
    n \[ScriptCapitalC];
  \[ScriptCapitalQ][n_] = (1 - n) \[ScriptCapitalB] +
    n \[ScriptCapitalD];
  \[HorizontalLine]MSeg[\[ScriptCapitalA]_, \[ScriptCapitalB]_, k_,
    t_] = (\[ScriptCapitalA] + \[ScriptCapitalB])/2 +
    k (t - 1/2) (\[ScriptCapitalB] - \[ScriptCapitalA]);

  (* reflections of the "butterfly" across all the coordinate planes *)

    Show[
   ParametricPlot3D[
    Table[
     ( {
        {\[ScriptI], 0, 0},
        {0, \[ScriptJ], 0},
        {0, 0, \[ScriptK]}
       } ). \[HorizontalLine]MSeg[\[ScriptCapitalP][
        u], \[ScriptCapitalQ][u], 2 u - 1, v],
     {\[ScriptI], {-1, 1}}, {\[ScriptJ], {-1, 1}}, {\[ScriptK], {-1,
       1}}
     ],
    {u, 0, 1}, {v, 0, 1},
    PlotPoints -> plotPts,

    Mesh -> mesh,
    MeshStyle -> Tube[tubeR],
    MeshFunctions -> {{x, y, z, u, v} \[Function] v},
    MeshShading -> {Lighter[Blue, .5], Yellow, Orange, Yellow,
      Lighter[Blue, .5]},

    BoundaryStyle -> Tube[tubeR],

    MaxRecursion -> maxRecurs
    ],

   (* the corners of the twisted sheet *)

   With[{pts = {\[ScriptCapitalA], \[ScriptCapitalB], \
\[ScriptCapitalC], \[ScriptCapitalD]}},
    Graphics3D[
     {Table[{Hue[(k - 1)/4], Sphere[pts[[k]], ptRad]}, {k, 1, 4}],
      Gray, Sphere[Plus @@ pts/4, ptRad]}]
    ],
   Lighting -> "Neutral",
   PlotRange -> 4,
   Axes -> True,
   AxesLabel -> {"x", "y", "z"}
   ]
  ],
 {{Ax, 0}, -4, 4, .125},
 {{Ay, -4}, -4, 4, .125},
 {{Az, -4}, -4, 4, .125},

 {{Bx, -4}, -4, 4, .125},
 {{By, 0}, -4, 4, .125},
 {{Bz, -4}, -4, 4, .125},

 {{Cx, 0}, -4, 4, .125},
 {{Cy, 0}, -4, 4, .125},
 {{Cz, -2}, -4, 4, .125},

 {{Dx, -4}, -4, 4, .125},
 {{Dy, -4}, -4, 4, .125},
 {{Dz, 0}, -4, 4, .125},

 {{mesh, 4}, 0, 9},
 {{tubeR, 0.03}, 0, 0.1, 0.01},
 {{plotPts, 6}, 2, 30, 1},
 {{maxRecurs, 1}, 0, 4, 1},
 {{ptRad, .1}, 0, 0.5, 0.01},
 {{tubeR, .03}, 0, 0.5, 0.01}
 ]

Back to comp.soft-sys.math.mathematica | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

Re: Slow plotting of reflected parametric "butterflies" Bill Rowe <readnews@sbcglobal.net> - 2012-01-22 12:26 +0000
  Re: Slow plotting of reflected parametric "butterflies" Chris Young <cy56@comcast.net> - 2012-01-23 07:59 +0000

csiph-web