Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.sys.transputer > #152

Re: Transtech TMB08 - Request for configuration assistance/guidance

Newsgroups comp.sys.transputer
Date 2015-09-11 02:40 -0700
References (1 earlier) <316e8dee-2d7c-40b8-9d49-fa792511e0b2@googlegroups.com> <537aada5-ecea-4cdc-abeb-e92558a6de95@googlegroups.com> <10513b42-b22c-4a09-8f13-e085d0935070@googlegroups.com> <9e836879-676d-4936-a8f2-65d846a346e2@googlegroups.com> <93a0a427-4935-4a74-ac85-f619e8a58690@googlegroups.com>
Message-ID <cfd143ba-a43d-43ff-b048-5d8ea8f4d220@googlegroups.com> (permalink)
Subject Re: Transtech TMB08 - Request for configuration assistance/guidance
From Richard Edwards <ejb@fastmail.fm>

Show all headers | View raw

On Friday, September 11, 2015 at 7:01:58 PM UTC+10, Mike B. wrote:
> Hi!
> 
> Let us focus on the 8bit Interface:
> 
> >What command sequence do you want me to run after having connected Link0In and Link0Out?
> 
> -o 160 1
> -o 161 0
> -o 160 0
> -i 152
> 00
> -i 153
> 01
> -o 151 AB
> -i 152
> 01
> -i 153
> 00
> -i 150
> AB
> -i 152
> 00
> -i 153
> 01
> 
> If the result is identical you have successfully transferred a single byte.
> 
> Now we try a PEEK/POKE sequence against a single TRAM.
> 
> Please remove the Link0In and Link0Out connection and insert a single TRAM (with a 32bit Transputer) in Slot 0.
> 
> -o 160 1
> -o 161 0
> -o 160 0
> -o 151 0   <- POKE 0x76543210 to 0x80000070
> -o 151 70
> -o 151 00
> -o 151 00
> -o 151 80
> -o 151 10
> -o 151 32
> -o 151 54
> -o 151 76
> -o 151 1   <- PEEK from 0x80000070
> -o 151 70
> -o 151 00
> -o 151 00
> -o 151 80
> -i 150
> 10
> -i 150
> 32
> -i 150
> 54
> -i 150
> 76
> 
> I've skipped the status query -i 152/-i 153.
> 
> Please note: These sequences are only quote from memory!
> 
> -Mike

Hi Mike

Ok so working with the card that has the 8bit ISA interface


Link0In connected to Link0Out (pin 12 and 13 on TRAM Slot 0 connected)
 
 -o 160 1
 -o 161 0
 -o 160 0
 -i 152
 00
 -i 153
 01
 -o 151 AB
 -i 152
 01
 -i 153
 00
 -i 150
 AB
 -i 152
 00
 -i 153
 01

all worked as stated.

Now when I put a TRAM in with a T800 on board 
 -o 160 1
 -o 161 0
 -o 160 0
 -o 151 0  
 -o 151 70
 -o 151 00
 -o 151 00
 -o 151 80
 -o 151 10
 -o 151 32
 -o 151 54
 -o 151 76
 -o 151 1  
 -o 151 70
 -o 151 00
 -o 151 00
 -o 151 80
 -i 150
 00 <-not as expected
 -i 150
 00 <-not as expected
 -i 150
 00 <-not as expected
 -i 150
 00 <-not as expected

have done this three times to make sure, same result...

out of curiosity do I need to do anything with the D connector on the back like I see in the manual it says to do for the TMB04?

Back to comp.sys.transputer | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Transtech TMB08 - Request for configuration assistance/guidance ejb@fastmail.fm - 2015-09-08 17:41 -0700
  Re: Transtech TMB08 - Request for configuration assistance/guidance ejb@fastmail.fm - 2015-09-08 18:02 -0700
    Re: Transtech TMB08 - Request for configuration assistance/guidance "Mike B." <michael_bruestle@yahoo.com> - 2015-09-09 04:28 -0700
      Re: Transtech TMB08 - Request for configuration assistance/guidance ejb@fastmail.fm - 2015-09-09 22:33 -0700
        Re: Transtech TMB08 - Request for configuration assistance/guidance ejb@fastmail.fm - 2015-09-10 03:44 -0700
          Re: Transtech TMB08 - Request for configuration assistance/guidance "Mike B." <michael_bruestle@yahoo.com> - 2015-09-11 02:01 -0700
            Re: Transtech TMB08 - Request for configuration assistance/guidance Richard Edwards <ejb@fastmail.fm> - 2015-09-11 02:40 -0700
              Re: Transtech TMB08 - Request for configuration assistance/guidance "Mike B." <michael_bruestle@yahoo.com> - 2015-09-11 04:05 -0700
                Re: Transtech TMB08 - Request for configuration assistance/guidance Richard Edwards <ejb@fastmail.fm> - 2015-09-11 05:22 -0700

csiph-web