Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.theory > #25680

Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace)

Subject Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace)
Newsgroups comp.theory
References (12 earlier) <MsudnZCpVMZHJifCnZ2dnUU7-I-dnZ2d@giganews.com> <4DAuH.21599$oL7.5244@fx06.iad> <xb2dnQr6lZjteCfCnZ2dnUU7-R3NnZ2d@giganews.com> <3dCuH.3749$xQ7.2252@fx28.iad> <76CdnQGy4MYtaCfCnZ2dnUU7-SHNnZ2d@giganews.com>
From Richard Damon <Richard@Damon-Family.org>
Message-ID <cUDuH.138543$xe4.136754@fx41.iad> (permalink)
Organization Forte - www.forteinc.com
Date 2020-11-22 20:03 -0500

Show all headers | View raw


On 11/22/20 6:35 PM, olcott wrote:
> On 11/22/2020 5:09 PM, Richard Damon wrote:
>> On 11/22/20 5:25 PM, olcott wrote:

>>> This definition of a halt decider allows utterly free reign in
>>> specifying the state transitions from H.0 to H.yes or H.no as long as
>>> H.yes indicates that wM is the Turing machine description that would
>>> halt on its input w and H.no indicates that wM is the Turing machine
>>> description that would not halt on its input w.
>>> H.q0  wMw  ⊢*  H.yes
>>> H.q0  wMw  ⊢*  H.no
>>>
>>> Thus when I specify these state transitions such that the invocation of
>>> Ĥ(Ĥ) would be infinitely recursive I am free to do so. I am allowed by
>>> the above defintion of a halt decider to specify the ⊢* wildcard state
>>> transitions such that the invocation of Ĥ(Ĥ) would be infinitely
>>> recursive.
>>
>> Sure, but if your Halt Decider doesn't make its decision in finite time
>> then IT is at fault, and has failed to met the requirements. This is
>> your fundamental problem. By the problem statement, you need to decide
>> in finite time, if your choice of algorythm created a non-halting
>> behavior, you don't get to claim that the machine you are part of has
>> that non-halting behavior, because YOU are constrained to have finite
>> execution.
> 
> 
> // decided after 25 instructions have been executed
> int main()
> {
>   u32 P = (u32)H_Hat;
>   Halts(P, P);
>   HALT;
> }
> 
> 
> // decided after 23 instructions have been executed
> int main()
> {
>   u32 P = (u32)H_Hat;
>   H_Hat(P);
>   HALT;
> }
> 
> 

But decided correctly?

Note, these programs are supposed to be run by an actual UTM, not a Halt
Decider, which is what I think you are doing.


>>>> The fact that the recursion in NOT inevitably recursive can be seen
>>>> because it IS possible to define a different halt decider that using a
>>>> similar detection of recursion, rather that just giving up and saying
>>>> the recursion is infinite, first asks itself if it assumed halting,
>>>> does
>>>> the system halt, in which case it can decide halting, else if it
>>>> decides
>>>> non-halting, does the system become non-halting, in which case it can
>>>> return non-halting. This still has to decide which wrong answer to give
>>>> to Linz (or you modify the problem to allow the decider to report that
>>>> the machine is acting contradictory). You also still need to solve the
>>>> problem of detecting non-recursive non-halting detection.
>>>>
>>>> Of course that fact that your logic has a flaw in it becomes obvious
>>>> when we look at the actual results of running the code under proper
>>>> conditions, as if and when Halts returns a non-halting result, the
>>>> system almost immediately comes to a halt.
>>>
>>> You construe proper conditions incorrectly. You cannot correctly justify
>>> why your "proper conditions" are required.
>>
>> You can look at the definition of the Turing Machine and manally run the
>> state transitions, as I have done. There is exactly one possible trace
>> for H_Hat given that Halts is a proper Halting Decider that for
>> H_Hat(H_Hat) decides non-halting
> 
> I have just executed the two inputs that I have listed above, thus my
> results are empirical rather than imaginary.
> 
>> 1) Enter H_Hat(H_Hat)
>> 2) duplicate H_Hat (this step 'optimized' out in your machine)
>> 3) Enter Halts(H_Hat, H_Hat)
>> 4) Halts does its decision and decides tht H_Hat is non-halting
>> 5) Halts returns false to indicate non-halting
>> 6) H_Hat goes to the else clause
>> 7) H_Hat Halts.
>>
>> Thus Halts was wrong.
> 
> I just ran that sequence you have it wrong.
> 
> _H_Hat()
> [000004f7](01)  55                  push ebp
> [000004f8](02)  8bec                mov ebp,esp
> [000004fa](01)  51                  push ecx
> [000004fb](03)  8b4508              mov eax,[ebp+08]
> [000004fe](01)  50                  push eax
> [000004ff](03)  8b4d08              mov ecx,[ebp+08]
> [00000502](01)  51                  push ecx
> [00000503](05)  e86ffeffff          call 00000377
> 
> _main()
> [00000527](01)  55                  push ebp
> [00000528](02)  8bec                mov ebp,esp
> [0000052a](01)  51                  push ecx
> [0000052b](07)  c745fcf7040000      mov [ebp-04],000004f7
> [00000532](03)  8b45fc              mov eax,[ebp-04]
> [00000535](01)  50                  push eax
> [00000536](05)  e8bcffffff          call 000004f7
> 
> Output_Debug_Trace() [00010ab8]  size(184)  capacity(65536)
> [00000527](01)  55                  push ebp
> [00000528](02)  8bec                mov ebp,esp
> [0000052a](01)  51                  push ecx
> [0000052b](07)  c745fcf7040000      mov [ebp-04],000004f7
> [00000532](03)  8b45fc              mov eax,[ebp-04]
> [00000535](01)  50                  push eax
> [00000536](05)  e8bcffffff          call 000004f7   // calls H_Hat
> [000004f7](01)  55                  push ebp
> [000004f8](02)  8bec                mov ebp,esp
> [000004fa](01)  51                  push ecx
> [000004fb](03)  8b4508              mov eax,[ebp+08]
> [000004fe](01)  50                  push eax
> [000004ff](03)  8b4d08              mov ecx,[ebp+08]
> [00000502](01)  51                  push ecx
> [00000503](05)  e86ffeffff          call 00000377  // calls Halts
> [000004f7](01)  55                  push ebp
> [000004f8](02)  8bec                mov ebp,esp
> [000004fa](01)  51                  push ecx
> [000004fb](03)  8b4508              mov eax,[ebp+08]
> [000004fe](01)  50                  push eax
> [000004ff](03)  8b4d08              mov ecx,[ebp+08]
> [00000502](01)  51                  push ecx
> [00000503](05)  e86ffeffff          call 00000377  // calls Halts
> 
> This above is where the halt decider aborts the whole H_Hat invocation
> sequence and reports that main() has been aborted because of not halting
> behavior. No more lines of user code are executed.

Because you have no true UTM in your system, this is not the trace of
actually running H_Hat(H_Hat) or it means that your Halts failed at its job.

When Halts detects that the machine represented on its tape has infinite
executing, in is REQUIREED to go to the 'non-halting' state which is
represented by Halts returning false.

Since this did not happen, your system is broken.

Look at the Turning machine design specified for H^ in the Linz paper.
The Halting Decider, per its definition, must end up in either its
terminal detected halting state or its terminal detected non-halting
state, and these states then continue back into H^. You machine
apparently just halted somewhere else, thus failing to meet the
requirement of the Halt Detector. We are in step 4 of my trace, which
says we are in code in the Halt Detector, and the machine has Halted,
which is NOT a valid operation.

Not also, that as a top level Halt detector, you machine has identified
that Halts is the part of the system that had non-halting behabior, as
the abort was inside the call to Halts, which by definition must have
finite execution to be a valid Halt Detector, which is the flaw I have
beed describing to you the whole time.

> 
>> One other time when you answered, you tried to state that the trace
>> stopped in 4, as Halts 'aborted' the machine, but if that happens, than
>> Halts has failed to meet its requirements of being a halting decider and
>> returning its answer.
> 
> I am not just guessing incorrectly like you are the actual execution
> trace does it the way that I say that it does it.
> 

Maybe the issue is that you seemed to have run

Halts(H_Hat, H_Hat) instead of H_Hat(H_Hat)
That or you don't have a Halt Detector but a Halter.

Back to comp.theory | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

It is known that a correct halt decider must return false (in this case)[V2] olcott <NoOne@NoWhere.com> - 2020-11-21 13:19 -0600
  Re: It is known that a correct halt decider must return false (in this case)[V2] Malcolm McLean <malcolm.arthur.mclean@gmail.com> - 2020-11-21 13:06 -0800
    Re: It is known that a correct halt decider must return false (in this case)[V2] olcott <NoOne@NoWhere.com> - 2020-11-21 15:35 -0600
  Re: It is known that a correct halt decider must return false (in this case)[V2] Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-21 23:46 +0000
    Re: It is known that a correct halt decider must return false (in this case)[V2] olcott <NoOne@NoWhere.com> - 2020-11-21 18:07 -0600
      Re: It is known that a correct halt decider must return false (in this case)[V2] Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-22 01:14 +0000
  Re: It is known that a correct halt decider must return false (in this case)[V2] André G. Isaak <agisaak@gm.invalid> - 2020-11-22 03:48 -0700
    Re: It is known that a correct halt decider must return false (in this case)[V2] olcott <NoOne@NoWhere.com> - 2020-11-22 08:17 -0600
      Re: It is known that a correct halt decider must return false (in this case)[V2] André G. Isaak <agisaak@gm.invalid> - 2020-11-22 07:58 -0700
        Re: It is known that a correct halt decider must return false (in this case)[V2](behind its back) olcott <NoOne@NoWhere.com> - 2020-11-22 10:16 -0600
          Re: It is known that a correct halt decider must return false (in this case)[V2](behind its back) André G. Isaak <agisaak@gm.invalid> - 2020-11-22 10:10 -0700
            Re: It is known that a correct halt decider must return false (in this case)[V2](behind its back) olcott <NoOne@NoWhere.com> - 2020-11-22 11:47 -0600
              Re: It is known that a correct halt decider must return false (in this case)[V2](behind its back) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 13:14 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-22 12:28 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 13:44 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-22 12:56 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 14:23 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-22 13:28 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 16:21 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-22 16:25 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 18:09 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) olcott <NoOne@NoWhere.com> - 2020-11-22 17:35 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) Richard Damon <Richard@Damon-Family.org> - 2020-11-22 20:03 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) Alan Mackenzie <acm@muc.de> - 2020-11-23 12:54 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) olcott <NoOne@NoWhere.com> - 2020-11-23 07:09 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) Richard Damon <Richard@Damon-Family.org> - 2020-11-23 08:38 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-23 07:55 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Richard Damon <Richard@Damon-Family.org> - 2020-11-23 10:19 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-23 09:52 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Richard Damon <Richard@Damon-Family.org> - 2020-11-23 12:46 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-23 08:50 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-23 17:33 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-23 17:31 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-23 17:14 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](actual execution trace) olcott <NoOne@NoWhere.com> - 2020-11-23 12:08 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) André G. Isaak <agisaak@gm.invalid> - 2020-11-22 11:50 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-22 13:04 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) André G. Isaak <agisaak@gm.invalid> - 2020-11-23 04:00 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) olcott <NoOne@NoWhere.com> - 2020-11-23 07:08 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) André G. Isaak <agisaak@gm.invalid> - 2020-11-23 08:19 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-23 09:49 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) André G. Isaak <agisaak@gm.invalid> - 2020-11-23 09:44 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-24 02:26 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-23 21:30 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-24 15:22 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-24 09:47 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Richard Damon <Richard@Damon-Family.org> - 2020-11-24 11:08 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-24 10:33 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Richard Damon <Richard@Damon-Family.org> - 2020-11-24 13:07 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-25 02:49 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-24 21:06 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Richard Damon <Richard@Damon-Family.org> - 2020-11-24 22:45 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-24 21:58 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-24 23:46 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-24 23:05 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 07:17 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 08:02 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 10:01 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 09:19 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 10:55 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 11:37 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 13:03 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 12:13 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 14:27 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 13:33 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 14:46 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 14:16 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-25 21:05 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 15:24 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 17:32 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 17:18 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 20:19 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-25 20:55 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 18:26 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-26 00:26 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 18:49 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 20:30 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 20:43 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 22:18 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-26 04:12 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 22:30 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 09:22 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) olcott <NoOne@NoWhere.com> - 2020-11-26 08:33 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 10:43 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) olcott <NoOne@NoWhere.com> - 2020-11-26 09:49 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) Malcolm McLean <malcolm.arthur.mclean@gmail.com> - 2020-11-26 09:09 -0800
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-26 17:21 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 11:50 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Malcolm McLean <malcolm.arthur.mclean@gmail.com> - 2020-11-26 10:29 -0800
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 12:41 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 13:47 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 13:07 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 16:02 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 15:12 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Malcolm McLean <malcolm.arthur.mclean@gmail.com> - 2020-11-26 13:42 -0800
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 15:56 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Malcolm McLean <malcolm.arthur.mclean@gmail.com> - 2020-11-26 14:14 -0800
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 16:20 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 19:11 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 18:25 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 20:17 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 17:22 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 16:34 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 18:09 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 17:16 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 19:06 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 18:10 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-26 23:11 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 17:41 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-27 01:34 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](Ben disagrees with himself) olcott <NoOne@NoWhere.com> - 2020-11-26 20:45 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](Ben disagrees with himself) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-27 17:09 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](Ben disagrees with himself [verified]) olcott <NoOne@NoWhere.com> - 2020-11-27 12:14 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](whole solution) olcott <NoOne@NoWhere.com> - 2020-11-26 11:58 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 13:21 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](ridiculous) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-26 16:35 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](facts v falsehood) olcott <NoOne@NoWhere.com> - 2020-11-26 08:26 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](facts v falsehood) Richard Damon <Richard@Damon-Family.org> - 2020-11-26 10:51 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 19:10 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-25 16:16 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 10:44 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-25 18:55 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 13:24 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-25 19:43 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 14:09 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Jeff Barnett <jbb@notatt.com> - 2020-11-25 14:30 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 21:24 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) olcott <NoOne@NoWhere.com> - 2020-11-25 21:03 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](no difference) Richard Damon <Richard@Damon-Family.org> - 2020-11-25 22:52 -0500
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-25 21:53 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-25 16:07 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-26 02:21 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) olcott <NoOne@NoWhere.com> - 2020-11-25 20:50 -0600
                Re: It is known that a correct halt decider must return false (in this case)[V2](obvious facts) Ben Bacarisse <ben.usenet@bsb.me.uk> - 2020-11-27 17:02 +0000
                Re: It is known that a correct halt decider must return false (in this case)[V2](false assumptions are not a rebuttal) Mike Terry <news.dead.person.stones@darjeeling.plus.com> - 2020-11-23 17:34 +0000
              Re: It is known that a correct halt decider must return false (in this case)[V2](behind its back) André G. Isaak <agisaak@gm.invalid> - 2020-11-22 12:03 -0700
                Re: It is known that a correct halt decider must return false (in this case)[V2](black cats are black) olcott <NoOne@NoWhere.com> - 2020-11-22 13:14 -0600

csiph-web