Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #7854

Re: Printer does forget user defined settings

From "Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl>
Newsgroups comp.lang.clipper.visual-objects
References <49dtfa5kojc15jt3n9si504i1gpq061o8s@4ax.com>
Subject Re: Printer does forget user defined settings
Message-ID <T3HLw.127604$QX.7249@fe40.am1> (permalink)
Organization Sunny Usenet - Affordable Usenet
Date 2015-03-10 19:52 +0100

Show all headers | View raw


Hey Dick,

Perhaps try the drivers from SeagullScientific and see if they work.
http://www.seagullscientific.com/drivers/intermec-windows-printer-drivers.aspx

We use them for our Casher printers which had also strange things going on 
especially regarding barcodes....

Regards, Marc

"D.J.W. van Kooten"  schreef in bericht 
news:49dtfa5kojc15jt3n9si504i1gpq061o8s@4ax.com...

A few days ago I asked about the Intermec printer which appeared not
to work as Windows printer. Forunately, the client took the Toshiba
labelprinter from his previous employer. We set up a user defined
page, used the same ReportPro label form as we did and it seemed to
work. Odd that it required user defined page settings but from earlier
experience we knew we had to do it this way.

But of course there's something strange as well. When I print the
report, and check the settings of the selected (or default) printer
from the program, the form USER does not show the correct dimensions.
It does when you reach the same printer settings of the same printer
straight from the Control panel. Some settings (like the vertical gap)
are remembered correctly however. I have no idea why it doesn't show
and use the dimensions as obviously defined.

I tried to use :

oPtrDevice:=PtrDevice{oOwner,oOwner}
oPtrDevice:PaperLength:=nPaperLen
oPtrDevice:PaperWidth:=nPaperWidth

where oOwner is the calling window, but oPtrDevice is a Null_Object
afterwards so that doesn't seem to work either.

Does anyone have an idea?

Dick

Back to comp.lang.clipper.visual-objects | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

Printer does forget user defined settings D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2015-03-10 10:25 +0100
  Re: Printer does forget user defined settings "Marc Verkade [MITCon]" <marc@mitNOSPAMconDELETE.nl> - 2015-03-10 19:52 +0100
    Re: Printer does forget user defined settings D.J.W. van Kooten <vankooten@removethis.ic2.com> - 2015-03-12 11:57 +0100

csiph-web