Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #263383
| From | gene heskett <gheskett@shentel.net> |
|---|---|
| Newsgroups | linux.debian.user |
| Subject | Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] |
| Date | 2023-11-11 22:40 +0100 |
| Message-ID | <Hz3RT-4KBn-1@gated-at.bofh.it> (permalink) |
| References | (7 earlier) <HyZuW-4HZm-3@gated-at.bofh.it> <HyZEB-4Iix-7@gated-at.bofh.it> <Hz07D-4Ira-1@gated-at.bofh.it> <Hz1dn-4J2a-7@gated-at.bofh.it> <Hz35v-4K7d-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 11/11/23 15:41, Pocket wrote: > > On 11/11/23 13:47, Stefan Monnier wrote: >>> I have used ssd drives connected to a RPI4 ever since the 4 came out, >>> zero issues. >>> The RPI4's boot from the ssd drives. >>> I have 4 SSD drives connected to a single RPI4 currently, using a >>> powered >>> USB hub. >> Hmm... so maybe the USB connection is not directly relevant either and >> the real issue is the power? I'm forced to agree. The wall wart supplied with the pi kits is rather under powered. I don't run them on less than a 5 volt 5 amp supply, and like pocket, they only get rebooted when needsreboot says so after an update. In 7 or so years of running a Sheldon lathe built in the 1940's, first with an rpi3b which was pushed a bit and an rpi4b that doesn't even breath hard, for at last 4, maybe 5 years, I've had one unscheduled reboot. That I think is about 100x better uptime than I'm averaging running the same linuxcnc software on wintel stuff. That 5 volt, 5 amp supply is powering 5 other interfacing boards to get the job done. One of its jobs is running a clone of the linuxcnc.org buildbot. It Just Works... >> >> Stefan >> > That would be my best guess also > Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis
Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-03 17:30 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-03 17:50 +0100
Re: How to use dmsetuup? Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-03 18:10 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-03 22:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 01:00 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-04 01:50 +0100
Re: How to use dmsetuup? "Andrew M.A. Cater" <amacater@einval.com> - 2023-11-03 23:20 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 01:10 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 12:50 +0100
Re: How to use dmsetuup? <tomas@tuxteam.de> - 2023-11-04 14:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 18:30 +0100
Re: How to use dmsetuup? tomas@tuxteam.de - 2023-11-04 19:40 +0100
Re: How to use dmsetuup? debian-user@howorth.org.uk - 2023-11-04 21:50 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-04 22:40 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 23:30 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 00:40 +0100
Re: How to use dmsetuup? yxcv@vienna.at - 2023-11-05 01:10 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-05 02:00 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 04:20 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-05 05:10 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 07:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-05 10:50 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 11:30 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-05 16:30 +0100
Re: How to use dmsetuup? "Thomas Schmitt" <scdbackup@gmx.net> - 2023-11-05 09:10 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 21:20 +0100
Re: How to use dmsetuup? debian-user@howorth.org.uk - 2023-11-05 21:50 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 23:30 +0100
Re: How to use dmsetuup? "Thomas Schmitt" <scdbackup@gmx.net> - 2023-11-05 23:20 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-05 23:50 +0100
Re: How to use dmsetuup? "Thomas Schmitt" <scdbackup@gmx.net> - 2023-11-06 08:40 +0100
xorriso and SIGTERM/SIGINT handler (was: Re: How to use dmsetuup?) Max Nikulin <manikulin@gmail.com> - 2023-11-06 05:30 +0100
Re: xorriso and SIGTERM/SIGINT handler "Thomas Schmitt" <scdbackup@gmx.net> - 2023-11-06 09:00 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 23:10 +0100
Re: How to use dmsetuup? Andy Smith <andy@strugglers.net> - 2023-11-04 10:40 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-04 13:30 +0100
Re: How to use dmsetuup? Franco Martelli <martellif67@gmail.com> - 2023-11-06 16:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-06 17:30 +0100
Re: How to use dmsetuup? Tom Dial <tddial@comcast.net> - 2023-11-08 00:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-08 01:30 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-08 06:10 +0100
Re: How to use dmsetuup? <tomas@tuxteam.de> - 2023-11-08 06:40 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-08 11:30 +0100
Re: How to use dmsetuup? "Andrew M.A. Cater" <amacater@einval.com> - 2023-11-08 19:10 +0100
Re: How to use dmsetuup? jeremy ardley <jeremy.ardley@gmail.com> - 2023-11-08 23:00 +0100
Re: How to use dmsetuup? Tom Dial <tddial@comcast.net> - 2023-11-09 02:10 +0100
Re: How to use dmsetuup? David Christensen <dpchrist@holgerdanske.com> - 2023-11-11 01:50 +0100
Re: How to use dmsetuup? gene heskett <gheskett@shentel.net> - 2023-11-11 04:30 +0100
Hardware for a back up server? [WAS Re: How to use dmsetuup?] "Andrew M.A. Cater" <amacater@einval.com> - 2023-11-11 18:00 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-11 18:10 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Pocket <pocket@columbus.rr.com> - 2023-11-11 18:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-11 19:50 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Pocket <pocket@columbus.rr.com> - 2023-11-11 21:50 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] gene heskett <gheskett@shentel.net> - 2023-11-11 22:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Jeffrey Walton <noloader@gmail.com> - 2023-11-11 22:10 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Jeffrey Walton <noloader@gmail.com> - 2023-11-12 00:30 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Dan Ritter <dsr@randomstring.org> - 2023-11-12 00:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] fxkl47BF@protonmail.com - 2023-11-11 18:30 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] David Christensen <dpchrist@holgerdanske.com> - 2023-11-12 01:10 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-12 05:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Anssi Saari <anssi.saari@debian-user.mail.kapsi.fi> - 2023-11-13 11:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-13 14:00 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Andy Smith <andy@strugglers.net> - 2023-11-12 14:20 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] David Christensen <dpchrist@holgerdanske.com> - 2023-11-12 19:40 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] "Andrew M.A. Cater" <amacater@einval.com> - 2023-11-12 18:20 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] David Christensen <dpchrist@holgerdanske.com> - 2023-11-12 20:30 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-12 21:20 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] <tomas@tuxteam.de> - 2023-11-13 06:40 +0100
Linux supprt (was: Hardware for a back up server? [WAS Re: How to use dmsetuup?]) Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-13 13:50 +0100
Re: Linux supprt (was: Hardware for a back up server? [WAS Re: How to use dmsetuup?]) Larry Martell <larry.martell@gmail.com> - 2023-11-13 16:00 +0100
Re: Linux supprt Stefan Monnier <monnier@iro.umontreal.ca> - 2023-11-13 16:40 +0100
Re: Linux supprt Nicholas Geovanis <nickgeovanis@gmail.com> - 2023-11-13 22:50 +0100
Re: Linux supprt John Hasler <john@sugarbit.com> - 2023-11-13 19:00 +0100
Re: Linux supprt <tomas@tuxteam.de> - 2023-11-13 19:40 +0100
Re: Linux supprt Nicholas Geovanis <nickgeovanis@gmail.com> - 2023-11-14 18:40 +0100
Re: Linux supprt <tomas@tuxteam.de> - 2023-11-14 18:50 +0100
Re: Hardware for a back up server? [WAS Re: How to use dmsetuup?] Joe <joe@jretrading.com> - 2023-11-13 15:10 +0100
Re: How to use dmsetuup? Tom Dial <tddial@comcast.net> - 2023-11-09 01:50 +0100
Re: How to use dmsetuup? Andy Smith <andy@strugglers.net> - 2023-11-09 16:20 +0100
Re: How to use dmsetuup? debian-user@howorth.org.uk - 2023-11-09 17:50 +0100
csiph-web