Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #245040
| From | Greg Wooledge <greg@wooledge.org> |
|---|---|
| Newsgroups | linux.debian.user |
| Subject | Re: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use |
| Date | 2022-02-06 15:50 +0100 |
| Message-ID | <DNR1v-2vq-1@gated-at.bofh.it> (permalink) |
| References | <DNQyt-2lz-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Sun, Feb 06, 2022 at 03:02:59PM +0100, Maurizio Caloro wrote:
> No other service are running on this port 1812, yes I'am shure.
Don't just tell us. SHOW us.
unicorn:~$ sudo lsof -i :1812
[sudo] password for greg:
unicorn:~$
If there's something using that port, lsof will show it:
unicorn:~$ sudo lsof -i :25
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
tcpserver 657 qpsmtpd 3u IPv4 15669 0t0 TCP *:smtp (LISTEN)
/usr/loca 182487 qpsmtpd 0u IPv4 1625329 0t0 TCP 10.0.0.7:smtp->ip246.tervelnet.com:11288 (ESTABLISHED)
/usr/loca 182487 qpsmtpd 1u IPv4 1625329 0t0 TCP 10.0.0.7:smtp->ip246.tervelnet.com:11288 (ESTABLISHED)
/usr/loca 182490 qpsmtpd 0u IPv4 1625339 0t0 TCP 10.0.0.7:smtp->212.70.149.89:6882 (ESTABLISHED)
/usr/loca 182490 qpsmtpd 1u IPv4 1625339 0t0 TCP 10.0.0.7:smtp->212.70.149.89:6882 (ESTABLISHED)
/usr/loca 182494 qpsmtpd 0u IPv4 1624452 0t0 TCP 10.0.0.7:smtp->5.34.205.151:64226 (ESTABLISHED)
/usr/loca 182494 qpsmtpd 1u IPv4 1624452 0t0 TCP 10.0.0.7:smtp->5.34.205.151:64226 (ESTABLISHED)
> Yes kill -9 PID always done, without any change
STOP that!!
DO NOT use kill -9 unless it's ABSOLUTELY necessary! Even if you think
it's absolutely necessary, consider rebooting instead. You might have to
anyway, if some process is stuck on a hardware failure.
> Failed binding to auth interface enp3s0 address * port 1812 bound to server
> default: Address already in use
>
> /etc/freeradius/3.0/sites-enabled/default[59]: Error binding to port for
> 0.0.0.0 port 1812
Sure sounds like something is using the port. lsof should show it. Or
ss, or netstat, if you use them correctly.
unicorn:~$ ss -ntl | grep :25
LISTEN 0 20 0.0.0.0:25 0.0.0.0:*
unicorn:~$ sudo ss -ntlp | grep :25
LISTEN 0 20 0.0.0.0:25 0.0.0.0:* users:(("tcpserver",pid=657,fd=3))
(The -p option requires superuser privs.)
Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
freeradius - Bullseye - port for 0.0.0.0 port 1812 in use "Maurizio Caloro" <maurizio@caloro.ch> - 2022-02-06 15:20 +0100
Re: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use Greg Wooledge <greg@wooledge.org> - 2022-02-06 15:50 +0100
AW: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use "Maurizio Caloro" <maurizio@caloro.ch> - 2022-02-06 16:10 +0100
Re: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use Greg Wooledge <greg@wooledge.org> - 2022-02-06 16:20 +0100
AW: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use "Maurizio Caloro" <maurizio@caloro.ch> - 2022-02-06 16:40 +0100
Re: freeradius - Bullseye - port for 0.0.0.0 port 1812 in use Greg Wooledge <greg@wooledge.org> - 2022-02-06 18:00 +0100
csiph-web