Groups > linux.debian.bugs.dist > #1051296

Bug#984720: linux-image-5.10.0-3-amd64: When the computer is awakened from sleep, a chaotic color appears on the screen.

From	Serkan <ssserkkk@yahoo.com>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#984720: linux-image-5.10.0-3-amd64: When the computer is awakened from sleep, a chaotic color appears on the screen.
Date	2021-03-07 18:00 +0100
Message-ID	<BQ4V3-7XQ-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Cross-posted to 2 groups.

Show all headers | View raw

Package: src:linux
Version: 5.10.13-1
Severity: normal
X-Debbugs-Cc: ssserkkk@yahoo.com

Dear Maintainer,

The screen looks colorful when I wake the laptop from sleep. But with ctrl +
alt + F1, I can display the login screen properly. When I log into the account
with the password, I again encounter a color screen. But when I restart the
system, it goes away.



In syslog;

kernel: [ 7184.276724] nouveau 0000:01:00.0: gr: 00200000 [] ch 5 [001f5ac000
systemd-logind[463]] subc 3 class 8297 mthd 15e0 data 00000000
kernel: [ 7184.276747] nouveau 0000:01:00.0: gr: TRAP_MP_EXEC - TP 0 MP 0:
00000010 [INVALID_OPCODE] at 07fd80 warp 0, opcode 00000000 00000000
kernel: [ 7184.276756] nouveau 0000:01:00.0: gr: TRAP_MP_EXEC - TP 0 MP 1:
00000010 [INVALID_OPCODE] at 07fec0 warp 0, opcode 00000000 00000000
kernel: [ 7184.276760] nouveau 0000:01:00.0: gr: 00200000 [] ch 5 [001f5ac000
systemd-logind[463]] subc 3 class 8297 mthd 16c4 data 40400908
kernel: [ 7184.276781] nouveau 0000:01:00.0: gr: TRAP_MP_EXEC - TP 0 MP 0:
00000010 [INVALID_OPCODE] at 07fd80 warp 0, opcode 00000000 00000000
kernel: [ 7184.276789] nouveau 0000:01:00.0: gr: TRAP_MP_EXEC - TP 0 MP 1:
00000010 [INVALID_OPCODE] at 07fec0 warp 0, opcode 00000000 00000000
kernel: [ 7184.276793] nouveau 0000:01:00.0: gr: 00200000 [] ch 5 [001f5ac000
systemd-logind[463]] subc 3 class 8297 mthd 1b0c data 1000f010



kernel: [  377.457163] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc00f (-2)
kernel: [  377.457172] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc00f failed with error -2
kernel: [  377.457178] nouveau 0000:01:00.0: vp: unable to load firmware
nouveau/nv84_xuc00f
kernel: [  377.457180] nouveau 0000:01:00.0: vp: init failed, -2
kernel: [  377.457212] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc103 (-2)
kernel: [  377.457215] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc103 failed with error -2
kernel: [  377.457218] nouveau 0000:01:00.0: bsp: unable to load firmware
nouveau/nv84_xuc103
kernel: [  377.457220] nouveau 0000:01:00.0: bsp: init failed, -2

-------------------------------------------------------------------------------------



-- Package-specific info:
** Version:
Linux version 5.10.0-3-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian
10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP
Debian 5.10.13-1 (2021-02-06)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-3-amd64
root=UUID=7c84a099-70ab-4417-a921-500ad0eae0c8 ro quiet

** Not tainted

** Kernel log:
[    5.731883] audit: type=1400 audit(1615128505.162:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=317
comm="apparmor_parser"
[    5.774443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.774493] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    5.802388] iTCO_vendor_support: vendor-support=0
[    5.805748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.806047] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[    5.806173] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.806397] r592: driver successfully loaded
[    5.909172] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[    5.909563] cfg80211: Loaded X.509 cert 'benh@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.909938] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.910302] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.910420] r852: driver loaded successfully
[    5.911308] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[    5.911486] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[    5.930241] at24 0-0050: supply vcc not found, using dummy regulator
[    5.932183] at24 0-0050: 256 byte spd EEPROM, read-only
[    5.932982] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.933450] acer_wmi: Function bitmap for Communication Device: 0x17
[    5.979059] input: PC Speaker as /devices/platform/pcspkr/input/input20
[    6.131527] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[    6.131530] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[    6.131599] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM
control
[    6.131637] iwl4965 0000:06:00.0: enabling device (0000 -> 0002)
[    6.131829] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link
4965AGN, REV=0x4
[    6.174534] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
[    6.181511] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a
channels
[    6.183428] iwl4965 0000:06:00.0: firmware: direct-loading firmware
iwlwifi-4965-2.ucode
[    6.183438] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
[    6.183708] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[    6.470303] iwl4965 0000:06:00.0 wlp6s0: renamed from wlan0
[    6.514355] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200:
line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[    6.514360] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[    6.514363] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1
(0x14/0x0/0x0/0x0/0x0)
[    6.514364] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.514366] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    6.514368] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.514370] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    6.514372] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.514374] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    6.562657] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    6.587430] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    6.587516] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    6.587585] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    6.587676] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    6.650694] Adding 31209468k swap on /dev/sda5.  Priority:-2 extents:1
across:31209468k SSFS
[    6.692322] intel_powerclamp: No package C-state available
[    6.731519] intel_powerclamp: No package C-state available
[    7.114695] usb 7-1: device not accepting address 2, error -71
[    7.190666] random: crng init done
[    7.190672] random: 7 urandom warning(s) missed due to ratelimiting
[    7.710667] clocksource: timekeeping watchdog on CPU0: Marking clocksource
'tsc' as unstable because the skew is too large:
[    7.710677] clocksource:                       'hpet' wd_now: 6c03f79
wd_last: 60257d8 mask: ffffffff
[    7.710682] clocksource:                       'tsc' cs_now: 9ff68c697
cs_last: 9bc4443b4 mask: ffffffffffffffff
[    7.710695] tsc: Marking TSC unstable due to clocksource watchdog
[    7.710712] TSC found unstable after boot, most likely due to broken BIOS.
Use 'tsc=unstable'.
[    7.710718] sched_clock: Marking unstable (7705621136,
5088530)<-(7712002504, -1291977)
[    7.710972] clocksource: Switched to clocksource hpet
[    7.968664] mc: Linux media interface: v0.10
[    8.004352] videodev: Linux video capture interface: v2.00
[    8.043522] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam
(064e:a101)
[    8.050627] input: Acer CrystalEye webcam as
/devices/pci0000:00/0000:00:1a.7/usb4/4-2/4-2:1.0/input/input25
[    8.050901] usbcore: registered new interface driver uvcvideo
[    8.050903] USB Video Class driver (1.1.1)
[    8.280898] NFSD: Using UMH upcall client tracking operations.
[    8.280905] NFSD: starting 90-second grace period (net f0000098)
[   10.241438] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc00f (-2)
[   10.241445] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[   10.241448] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc00f failed with error -2
[   10.241453] nouveau 0000:01:00.0: vp: unable to load firmware
nouveau/nv84_xuc00f
[   10.241455] nouveau 0000:01:00.0: vp: init failed, -2
[   10.241485] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc103 (-2)
[   10.241488] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc103 failed with error -2
[   10.241490] nouveau 0000:01:00.0: bsp: unable to load firmware
nouveau/nv84_xuc103
[   10.241492] nouveau 0000:01:00.0: bsp: init failed, -2

[   12.589153] wlp6s0: associated
[   12.719885] rfkill: input handler disabled
[   12.893119] cryptd: max_cpu_qlen set to 1000
[   13.070240] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[   25.221286] rfkill: input handler enabled
[   26.521558] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc00f (-2)
[   26.521566] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc00f failed with error -2
[   26.521570] nouveau 0000:01:00.0: vp: unable to load firmware
nouveau/nv84_xuc00f
[   26.521573] nouveau 0000:01:00.0: vp: init failed, -2
[   26.521602] nouveau 0000:01:00.0: firmware: failed to load
nouveau/nv84_xuc103 (-2)
[   26.521605] nouveau 0000:01:00.0: Direct firmware load for
nouveau/nv84_xuc103 failed with error -2
[   26.521607] nouveau 0000:01:00.0: bsp: unable to load firmware
nouveau/nv84_xuc103
[   26.521609] nouveau 0000:01:00.0: bsp: init failed, -2
[   29.404675] rfkill: input handler disabled
[  493.874953] perf: interrupt took too long (2503 > 2500), lowering
kernel.perf_event_max_sample_rate to 79750
[  614.802913] perf: interrupt took too long (3155 > 3128), lowering
kernel.perf_event_max_sample_rate to 63250
[  838.750315] perf: interrupt took too long (3951 > 3943), lowering
kernel.perf_event_max_sample_rate to 50500
[ 1246.618816] perf: interrupt took too long (4944 > 4938), lowering
kernel.perf_event_max_sample_rate to 40250
[ 1670.234708] CE: hpet increased min_delta_ns to 20115 nsec
[ 5356.177946] perf: interrupt took too long (6181 > 6180), lowering
kernel.perf_event_max_sample_rate to 32250

------------------------------------




-- Package-specific info:
** Version:
Linux version 5.10.0-3-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.13-1 (2021-02-06)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-3-amd64 root=UUID=7c84a099-70ab-4417-a921-500ad0eae0c8 ro quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Acer, inc.
product_name: Aspire 5920G    
product_version: Not Applicable
chassis_vendor: Acer, Inc.
chassis_version: N/A
bios_vendor: Acer   
bios_version: v1.3708
board_vendor: Acer, Inc.
board_name: Chapala         
board_version: Not Applicable

** Loaded modules:
ctr
aes_generic
libaes
crypto_simd
cryptd
glue_helper
ccm
nfnetlink
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
videodev
mc
coretemp
kvm_intel
snd_hda_codec_hdmi
snd_hda_codec_realtek
kvm
snd_hda_codec_generic
pktcdvd
ledtrig_audio
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
snd_soc_core
snd_compress
soundwire_cadence
snd_hda_codec
irqbypass
snd_hda_core
iwl4965
joydev
snd_hwdep
iwlegacy
soundwire_bus
mac80211
pcspkr
serio_raw
acer_wmi
sparse_keymap
at24
r852
sm_common
nand
cfg80211
nand_ecc
snd_pcm
bch
iTCO_wdt
intel_pmc_bxt
iTCO_vendor_support
nandcore
r592
sg
watchdog
mtd
memstick
rfkill
snd_timer
libarc4
snd
soundcore
evdev
ac
acpi_cpufreq
nfsd
firewire_sbp2
msr
parport_pc
ppdev
auth_rpcgss
nfs_acl
lockd
lp
grace
parport
sunrpc
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
sr_mod
crct10dif_common
cdrom
ata_generic
nouveau
mxm_wmi
i2c_algo_bit
ttm
drm_kms_helper
sdhci_pci
cqhci
tg3
cec
ata_piix
ehci_pci
uhci_hcd
sdhci
firewire_ohci
ehci_hcd
libphy
psmouse
ahci
libahci
libata
i2c_i801
i2c_smbus
scsi_mod
mmc_core
drm
firewire_core
crc_itu_t
lpc_ich
usbcore
ptp
pps_core
usb_common
wmi
battery
video
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00002000-00002fff [size=4K]
	Memory behind bridge: f0000000-f2ffffff [size=48M]
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff [size=256M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f3504800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at f3500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00003000-00003fff [size=4K]
	Memory behind bridge: c0000000-c01fffff [size=2M]
	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff [size=2M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 26
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 00004000-00004fff [size=4K]
	Memory behind bridge: c0400000-c05fffff [size=2M]
	Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff [size=2M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 27
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00005000-00005fff [size=4K]
	Memory behind bridge: c0800000-c09fffff [size=2M]
	Prefetchable memory behind bridge: 00000000c0a00000-00000000c0bfffff [size=2M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1860 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f3504c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
	I/O behind bridge: [disabled]
	Memory behind bridge: f3200000-f32fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
	Region 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual]
	Region 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
	Region 3: Memory at 00000370 (type 3, non-prefetchable) [virtual]
	Region 4: I/O ports at 18a0 [virtual] [size=16]
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, ata_generic

00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 28
	Region 0: I/O ports at 18d8 [size=8]
	Region 1: I/O ports at 18cc [size=4]
	Region 2: I/O ports at 18d0 [size=8]
	Region 3: I/O ports at 18c8 [size=4]
	Region 4: I/O ports at 18e0 [size=32]
	Region 5: Memory at f3504000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at c0c00000 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 1c00 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [GeForce 8600M GS] [10de:0425] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f0000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 2000 [size=128]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nouveau

06:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
	Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN [8086:1101]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at c0400000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwl4965
	Kernel modules: iwl4965

08:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at c0800000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

0a:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f3200000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

0a:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f3200800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci

0a:09.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f3201000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: r592
	Kernel modules: r592

0a:09.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
	Subsystem: Acer Incorporated [ALI] Aspire 5920G [1025:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f3201400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: r852
	Kernel modules: r852


** USB devices:
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-3-amd64 (SMP w/2 CPU threads)
Locale: LANG=tr_TR.UTF-8, LC_CTYPE=tr_TR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-3-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.139
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-3-amd64 recommends:
ii  apparmor             2.13.6-9
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-3-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.04-16
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-3-amd64 is related to:
ii  firmware-amd-graphics     20201218-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20201218-3
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20201218-3
ii  firmware-misc-nonfree     20201218-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Back to linux.debian.bugs.dist | Previous | Next | Find similar | Unroll thread

Thread

Bug#984720: linux-image-5.10.0-3-amd64: When the computer is awakened from sleep, a chaotic color appears on the screen. Serkan <ssserkkk@yahoo.com> - 2021-03-07 18:00 +0100

csiph-web