Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #232131

Re: need to run the windows version of cura for amd64

Show all headers | View raw

On 2/25/21 12:50 PM, Gene Heskett wrote:
> Greetings all;
> 
> I may have made a mistake, but I bought a dremel digilab 3d45 FDM
> printer, aka a 3d printer. A better printer in the medium priced
> category at a bit over $1800 from Amazon.
> 
> I have the appimage of cura but that version has no knowledge of this
> printer, so it abuses it very noisily. The two major diffs are that the
> dremel apparently considers the right rear of the plate as home, whereas
> the ender3 I also have uses the left front corner as home.
> 
> They have an adapted version of cura for a free download, but only in
> Win64 and mac os versions, no appimages in sight.
> 
> So, what is the best winderz emulator we have, to run this:
> 
> Dremel3DSlicer-1.2.3-win64.exe
> 
> Which file says is a:
> 
> Dremel3DSlicer-1.2.3-win64.exe: PE32 executable (GUI) Intel 80386, for MS
> Windows, Nullsoft Installer self-extracting archive
> 
> I have no experience wrangling wine or whatever.
> 
> Thanks all;
> 
> Cheers, Gene Heskett
> 
Hi Gene,

Several years ago I needed a Windows emulator to run a pal programmer. 
I found that the application program would run fine with wine but it 
expected to load a custom hardware driver which Linux would not allow. 
I think you are going to run into the same problem with your printer.  I 
believe wine will work with serial and parallel ports if the application 
goes through Linux but a custom driver won't work.

There is a commercial version of wine called Crossover which is not 
unreasonably expensive.  I suggest you check with them on the state of 
application program drivers. www.codeweavers.com

Best regards,
Fred

Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

need to run the windows version of cura for amd64 Gene Heskett <gheskett@shentel.net> - 2021-02-25 21:00 +0100
  Re: need to run the windows version of cura for amd64 IL Ka <kazakevichilya@gmail.com> - 2021-02-25 21:10 +0100
    Re: need to run the windows version of cura for amd64 Gene Heskett <gheskett@shentel.net> - 2021-02-25 22:20 +0100
      Re: need to run the windows version of cura for amd64 IL Ka <kazakevichilya@gmail.com> - 2021-02-25 23:20 +0100
        Re: need to run the windows version of cura for amd64 Gene Heskett <gheskett@shentel.net> - 2021-02-25 23:40 +0100
  Re: need to run the windows version of cura for amd64 deloptes <deloptes@gmail.com> - 2021-02-25 23:40 +0100
  Re: need to run the windows version of cura for amd64 Fred <fred@blakemfg.com> - 2021-02-26 01:40 +0100
  Re: need to run the windows version of cura for amd64 David <bouncingcats@gmail.com> - 2021-02-26 11:30 +0100
    Re: need to run the windows version of cura for amd64 David <bouncingcats@gmail.com> - 2021-02-26 11:50 +0100
      Re: need to run the windows version of cura for amd64 Gene Heskett <gheskett@shentel.net> - 2021-02-26 14:40 +0100
        Re: need to run the windows version of cura for amd64 David <bouncingcats@gmail.com> - 2021-02-26 23:00 +0100

csiph-web