Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.sys.acorn.apps > #19720

Re: Test post

From "Richard Darby (news)" <news@rjdarby.co.uk>
Newsgroups comp.sys.acorn.apps
Subject Re: Test post
Date 2026-09-06 14:23 +0100
Organization None
Message-ID <5d14169651news@rjdarby.co.uk> (permalink)
References <5d132c6ad3Spambin@argonet.co.uk> <393132135d.DaveMeUK@BeagleBoard-xM> <5d13a61f15Spambin@argonet.co.uk> <5d13b4e2ccnews@rjdarby.co.uk> <5d13b9d12cNews04@avisoft.f9.co.uk>

Show all headers | View raw


In article <5d13b9d12cNews04@avisoft.f9.co.uk>,
   Martin <News04@avisoft.f9.co.uk> wrote:
> In article <5d13b4e2ccnews@rjdarby.co.uk>,
>    Richard Darby (news) <news@rjdarby.co.uk> wrote:
> > In article <5d13a61f15Spambin@argonet.co.uk>,
> >    Stuart <Spambin@argonet.co.uk> wrote:
> > [snip]

> > > check my networking setup.

> > > This is the current status.

> > > the computer I use for the internet these days is a Raspberry Pi
> > > 4 (Riscos Bits "Fourtress") so has not been around that long. I
> > > have checked the internet configuration, and this is what I see:

> > > Routing:
> > > Gateway                192.168.0.1
> > > Act as IP router       unticked
> > > Run RouteD             unticked
> > > Routes file             All lines begin with#


> > > Host name              RISCOpi
> > > Local domain           Blank
> > > Primary name server    Blank
> > > Try name server to     unticked
> > > Hosts file             # in front of all lines except loopback 127.0.0.1
> > > secondary name server  Blank
> > > Tertiary name server   Blank
> > > Resolver         Acorn

> > This looks like a Resolver issue.

> > I had to change my gateway which was the same as yours, to the
> > access address of my new router (in my case 192.168.1.254) and the
> > primary name server to the same address so the router supplies the
> > DNS function. This should fix the resolver issue.

> I agree the blank Local Domain and Name Server look wrong ... but
> surely they should be blank (as they are here) if the interface
> Configure says get IP using DHCP, which should supply. What does the
> Interface Status show?

Yes, my example is for a fixed address on a wired Network.

Regards,
Richard.

-- 

Richard Darby.
website: http://www.rjdarby.co.uk
Do not reply to this address all mail is deleted.
Reply to: <my first name> at <my domain>

Back to comp.sys.acorn.apps | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

Test post Stuart <Spambin@argonet.co.uk> - 2026-09-04 18:59 +0000
  Re: Test post David Higton <dave@davehigton.me.uk> - 2026-09-04 20:49 +0100
    Re: Test post Stuart <Spambin@argonet.co.uk> - 2026-09-05 17:00 +0000
      Re: Test post Martin <News04@avisoft.f9.co.uk> - 2026-09-05 18:46 +0100
        Re: Test post David Higton <dave@davehigton.me.uk> - 2026-09-05 19:03 +0100
          Re: Test post Chris Hughes <news13@noonehere.co.uk> - 2026-09-05 20:10 +0100
      Re: Test post John <newsmcc@blueyonder.co.uk> - 2026-09-05 19:21 +0100
      Re: Test post "Richard Darby (news)" <news@rjdarby.co.uk> - 2026-09-05 20:36 +0100
        Re: Test post Martin <News04@avisoft.f9.co.uk> - 2026-09-05 21:30 +0100
          Re: Test post "Richard Darby (news)" <news@rjdarby.co.uk> - 2026-09-06 14:23 +0100
    Test post Stuart <Spambin@argonet.co.uk> - 2026-09-05 21:15 +0000

csiph-web