Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.parallel > #579

Call for papers: Dataflow Models for Extreme Scale Computing (DFM 2013)

From Stéphane Zuckerman <szuckerm@eecis.udel.edu>
Newsgroups comp.parallel, news.announce.conferences
Subject Call for papers: Dataflow Models for Extreme Scale Computing (DFM 2013)
Date 2013-07-11 10:16 -0400
Organization A noiseless patient Spider
Message-ID <51DEBE40.2000704@eecis.udel.edu> (permalink)

Cross-posted to 2 groups.

Show all headers | View raw


[This is the second mailing -- additional information relative to 
Submissions included]

(Apologies for multiple receptions)

THIRD WORKSHOP ON DATA-FLOW EXECUTION MODELS
          FOR EXTREME SCALE COMPUTING (DFM 2013)
      to be held in conjunction with PACT 2013


      September 8, 2013, Edinburgh, Scotland
http://www.cs.ucy.ac.cy/dfmworkshop/

The First International workshop on .Data-Flow Models (DFM) for extreme 
scale computing. was held in Galveston Island, Texas in October 2011 in 
conjunction with PACT 2011. DFM 2012 was held in conjunction with PACT 
2012 in Minneapolis, Minnesota in September 2012.

The purpose of DFM continues being to bring together those researchers 
interested in novel computational models based on Data-Flow principles 
of execution. The switch to multi-core systems has raised concurrency to 
the level of a major issue if we are to use the increasing number of 
cores in a chip.

In the past five decades, sequential computing dominated the computer 
architecture landscape because designers were successful at building 
faster and faster computers by solely relying on improvements on 
fabrication technologies and architectural/organization optimizations. 
The most severe limitation of the sequential model, namely its inability 
to tolerate long memory latencies has slowed down the performance gains. 
This phenomenon is the ubiquitous Memory Wall. While various mechanisms 
have been implemented to overcome the wall (such as extremely efficient 
hardware prefetch support for example), they only add to another wall 
that hampers highly efficient execution of programs and modern chip 
design: the Power Wall. Power considerations and heat dissipation issues 
have forced manufacturers to switch to multiple cores per chip and thus 
move into the concurrency era.

New concurrent models/paradigms are needed in order to fully utilize the 
potential of Multi-core chips. The Data-flow model is a formal model 
that can handle concurrency and tolerate memory and synchronization 
latencies. Data-Flow inspired systems could also be simpler and more 
power efficient than conventional systems. Recent work has shown that 
the Data-Flow principles can be used to develop systems that can 
outperform systems based on conventional techniques. Thus, it is time to 
revisit Data-driven computation and bring it to the Multi-core and 
extreme scale computing.

DFM 2013 solicits novel papers that include but are not limited to:
- Novel Data-Flow inspired Execution models and architectures
- Functional and Single assignment based Languages.
- Strict and non-strict execution models.
- Compilers and tools for Data-Flow/Data-Driven systems.
- Hybrid Data-driven/Control-driven systems.
- Position Papers of on the Future of Data-Flow in the Multi-core era 
and beyond.

All accepted papers will appear in the Computer Society Digital Library. 
Extended versions of the best papers will be published in a special 
issue of IJPP (International Journal on Parallel Programming).

SUBMISSION INFORMATION
DFM 2013 will accept both Full and Short papers. Full papers should be 
prepared using the IEEE Proceedings format, and should be no longer than 
8 pages. Short Papers should be submitted in the form of extended 
abstracts/position papers (up to 4 pages).

IMPORTANT DATES
Submission Deadline: July 15th
Notification of Authors: Aug 10th

STEERING COMMITTEE
Skevos Evripidou , University of Cyprus
Guang Gao, University of Delaware
Jean-Luc Gaudiot, University of California at Irvine
Vivek Sarkar, Rice University
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo

PUBLICITY CHAIR
Stéphane Zuckerman, University of Delaware

PROGRAM COMMITTEE
Skevos Evripidou, University of Cyprus
Guang Gao, University of Delaware
Jean-Luc Gaudiot, Univ. of California at Irvine
Vivek Sarkar, Rice University
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo
David Abramson, Monash University
Costas Kyriacou, Frederic University
Pedro Trancoso, University of Cyprus
Kyriacos Stavrou, Intel Labs Barcelona, SP
John Feo, Pacific Northwest National Laboratory
Bob Iannucci, CMU, Silicon Valley, USA
Wallid Najjar, University of California, Riverside
Wolfgang Karl, Karlsruhe Institute of Technology
Mark Oskin, University of Washington
Andrew Sohn, NJIT, USA
Reiner Hartenstein, TU  Kaiserslautern
Kemal Ebcio.lu, Global Supercomputing Corp.

PROCEEDING CHAIRS
Giorgos Michael, University of Cyprus

-- 
Stephane Zuckerman
Computer Architecture and Parallel Systems Laboratory
University of Delaware, 201h Evans Hall Newark. DE 19716
Office # 302 831-6534 / Cell # 302 883 9979









DFM2013_CFP.txt


     THIRD WORKSHOP ON DATA-FLOW EXECUTION MODELS
         FOR EXTREME SCALE COMPUTING (DFM 2013)
     to be held in conjunction with PACT 2013


     September 8, 2013, Edinburgh, Scotland
     http://www.cs.ucy.ac.cy/dfmworkshop/

The First International workshop on .Data-Flow Models (DFM) for extreme scale computing. was held in Galveston Island, Texas in October 2011 in conjunction with PACT 2011. DFM 2012 was held in conjunction with PACT 2012 in Minneapolis, Minnesota in September 2012.

The purpose of DFM continues being to bring together those researchers interested in novel computational models based on Data-Flow principles of execution. The switch to multi-core systems has raised concurrency to the level of a major issue if we are to use the increasing number of cores in a chip.

In the past five decades, sequential computing dominated the computer architecture landscape because designers were successful at building faster and faster computers by solely relying on improvements on fabrication technologies and architectural/organization optimizations. The most severe limitation of the sequential model, namely its inability to tolerate long memory latencies has slowed down the performance gains. This phenomenon is the ubiquitous Memory Wall. While various mechanisms have been implemented to overcome the wall (such as extremely efficient hardware prefetch support for example), they only add to another wall that hampers highly efficient execution of programs and modern chip design: the Power Wall. Power considerations and heat dissipation issues have forced manufacturers to switch to multiple cores per chip and thus move into the concurrency era.

New concurrent models/paradigms are needed in order to fully utilize the potential of Multi-core chips. The Data-flow model is a formal model that can handle concurrency and tolerate memory and synchronization latencies. Data-Flow inspired systems could also be simpler and more power efficient than conventional systems.  Recent work has shown that the Data-Flow principles can be used to develop systems that can outperform systems based on conventional techniques. Thus, it is time to revisit Data-driven computation and bring it to the Multi-core and extreme scale computing.

DFM 2013 solicits novel papers that include but are not limited to:
- Novel Data-Flow inspired Execution models and architectures
- Functional and Single assignment based Languages.
- Strict and non-strict execution models.
- Compilers and tools for Data-Flow/Data-Driven systems.
- Hybrid Data-driven/Control-driven systems.
- Position Papers of on the Future of Data-Flow in the Multi-core era and beyond.

All accepted papers will appear in the Computer Society Digital Library. Extended versions of the best papers will be published in a special issue of IJPP (International Journal on Parallel Programming).

SUBMISSION INFORMATION
DFM 2013 will accept both Full and Short papers. Full papers should be prepared using the IEEE Proceedings format, and should be no longer than 8 pages. Short Papers should be submitted in the form of extended abstracts/position papers (up to 4 pages).

IMPORTANT DATES
Submission Deadline: July 15th
Notification of Authors: Aug 10th

STEERING COMMITTEE
Skevos Evripidou , University of Cyprus
Guang Gao, University of Delaware
Jean-Luc Gaudiot, University of California at Irvine
Vivek Sarkar, Rice University
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo

PUBLICITY CHAIR
Stéphane Zuckerman, University of Delaware

PROGRAM COMMITTEE
Skevos Evripidou, University of Cyprus
Guang Gao, University of Delaware
Jean-Luc Gaudiot, Univ. of California at Irvine
Vivek Sarkar, Rice University
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo
David Abramson, Monash University
Costas Kyriacou, Frederic University
Pedro Trancoso, University of Cyprus
Kyriacos Stavrou, Intel Labs Barcelona, SP
John Feo, Pacific Northwest National Laboratory
Bob Iannucci, CMU, Silicon Valley, USA
Wallid Najjar, University of California, Riverside
Wolfgang Karl, Karlsruhe Institute of Technology
Mark Oskin, University of Washington
Andrew Sohn, NJIT, USA
Reiner Hartenstein, TU  Kaiserslautern
Kemal Ebcio.lu, Global Supercomputing Corp.

PROCEEDING CHAIRS
Giorgos Michael, University of Cyprus


-- 
Stéphane Zuckerman
Computer Architecture & Parallel Systems Laboratory
University of Delaware ­--- 201G Evans Hall, Newark, DE
Work #: +1 302 831-6534  Cell #: +1 302 883-9979
--------------040604060801090603080201
Content-Type: text/html; charset=WINDOWS-1252
Content-Transfer-Encoding: quoted-printable

<html>
  <head>

    <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
  </head>
  <body text="#000000" bgcolor="#FFFFFF">
    <div class="moz-text-flowed" style="font-family: -moz-fixed;
      font-size: 12px;" lang="x-unicode">[This is the second mailing --
      additional information relative to Submissions included]
      <br>
      <br>
      (Apologies for multiple receptions)
      <br>
      <br>
      THIRD WORKSHOP ON DATA-FLOW EXECUTION MODELS
      <br>
      &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; FOR EXTREME SCALE COMPUTING (DFM 2013)
      <br>
      &nbsp;&nbsp;&nbsp;&nbsp; to be held in conjunction with PACT 2013
      <br>
      <br>
      <br>
      &nbsp;&nbsp;&nbsp;&nbsp; September 8, 2013, Edinburgh, Scotland
      <br>
      &nbsp;&nbsp;&nbsp;&nbsp; <a class="moz-txt-link-freetext"
        href="http://www.cs.ucy.ac.cy/dfmworkshop/">http://www.cs.ucy.ac.cy/dfmworkshop/</a>
      <br>
      <br>
      The First International workshop on .Data-Flow Models (DFM) for
      extreme scale computing. was held in Galveston Island, Texas in
      October 2011 in conjunction with PACT 2011. DFM 2012 was held in
      conjunction with PACT 2012 in Minneapolis, Minnesota in September
      2012.
      <br>
      <br>
      The purpose of DFM continues being to bring together those
      researchers interested in novel computational models based on
      Data-Flow principles of execution. The switch to multi-core
      systems has raised concurrency to the level of a major issue if we
      are to use the increasing number of cores in a chip.
      <br>
      <br>
      In the past five decades, sequential computing dominated the
      computer architecture landscape because designers were successful
      at building faster and faster computers by solely relying on
      improvements on fabrication technologies and
      architectural/organization optimizations. The most severe
      limitation of the sequential model, namely its inability to
      tolerate long memory latencies has slowed down the performance
      gains. This phenomenon is the ubiquitous Memory Wall. While
      various mechanisms have been implemented to overcome the wall
      (such as extremely efficient hardware prefetch support for
      example), they only add to another wall that hampers highly
      efficient execution of programs and modern chip design: the Power
      Wall. Power considerations and heat dissipation issues have forced
      manufacturers to switch to multiple cores per chip and thus move
      into the concurrency era.
      <br>
      <br>
      New concurrent models/paradigms are needed in order to fully
      utilize the potential of Multi-core chips. The Data-flow model is
      a formal model that can handle concurrency and tolerate memory and
      synchronization latencies. Data-Flow inspired systems could also
      be simpler and more power efficient than conventional systems.&nbsp;
      Recent work has shown that the Data-Flow principles can be used to
      develop systems that can outperform systems based on conventional
      techniques. Thus, it is time to revisit Data-driven computation
      and bring it to the Multi-core and extreme scale computing.
      <br>
      <br>
      DFM 2013 solicits novel papers that include but are not limited
      to:
      <br>
      - Novel Data-Flow inspired Execution models and architectures
      <br>
      - Functional and Single assignment based Languages.
      <br>
      - Strict and non-strict execution models.
      <br>
      - Compilers and tools for Data-Flow/Data-Driven systems.
      <br>
      - Hybrid Data-driven/Control-driven systems.
      <br>
      - Position Papers of on the Future of Data-Flow in the Multi-core
      era and beyond.
      <br>
      <br>
      All accepted papers will appear in the Computer Society Digital
      Library. Extended versions of the best papers will be published in
      a special issue of IJPP (International Journal on Parallel
      Programming).
      <br>
      <br>
      SUBMISSION INFORMATION
      <br>
      DFM 2013 will accept both Full and Short papers. Full papers
      should be prepared using the IEEE Proceedings format, and should
      be no longer than 8 pages. Short Papers should be submitted in the
      form of extended abstracts/position papers (up to 4 pages).
      <br>
      <br>
      IMPORTANT DATES
      <br>
      Submission Deadline: July 15th
      <br>
      Notification of Authors: Aug 10th
      <br>
      <br>
      STEERING COMMITTEE
      <br>
      Skevos Evripidou , University of Cyprus
      <br>
      Guang Gao, University of Delaware
      <br>
      Jean-Luc Gaudiot, University of California at Irvine
      <br>
      Vivek Sarkar, Rice University
      <br>
      Ian Watson, University of Manchester
      <br>
      Kei Hiraki, University of Tokyo
      <br>
      <br>
      PUBLICITY CHAIR
      <br>
      St&eacute;phane Zuckerman, University of Delaware
      <br>
      <br>
      PROGRAM COMMITTEE
      <br>
      Skevos Evripidou, University of Cyprus
      <br>
      Guang Gao, University of Delaware
      <br>
      Jean-Luc Gaudiot, Univ. of California at Irvine
      <br>
      Vivek Sarkar, Rice University
      <br>
      Ian Watson, University of Manchester
      <br>
      Kei Hiraki, University of Tokyo
      <br>
      David Abramson, Monash University
      <br>
      Costas Kyriacou, Frederic University
      <br>
      Pedro Trancoso, University of Cyprus
      <br>
      Kyriacos Stavrou, Intel Labs Barcelona, SP
      <br>
      John Feo, Pacific Northwest National Laboratory
      <br>
      Bob Iannucci, CMU, Silicon Valley, USA
      <br>
      Wallid Najjar, University of California, Riverside
      <br>
      Wolfgang Karl, Karlsruhe Institute of Technology
      <br>
      Mark Oskin, University of Washington
      <br>
      Andrew Sohn, NJIT, USA
      <br>
      Reiner Hartenstein, TU&nbsp; Kaiserslautern
      <br>
      Kemal Ebcio.lu, Global Supercomputing Corp.
      <br>
      <br>
      PROCEEDING CHAIRS
      <br>
      Giorgos Michael, University of Cyprus
      <br>
      <br>
      <div class="moz-txt-sig"><span class="moz-txt-tag">--&nbsp;<br>
        </span>Stephane Zuckerman
        <br>
        Computer Architecture and Parallel Systems Laboratory
        <br>
        University of Delaware, 201h Evans Hall Newark. DE 19716
        <br>
        Office # 302 831-6534 / Cell # 302 883 9979
        <br>
        <br>
        <br>
        <br>
        <br>
        <br>
        <br>
        <br>
        <br>
      </div>
    </div>
    <br>
    <fieldset class="mimeAttachmentHeader"><legend
        class="mimeAttachmentHeaderName">DFM2013_CFP.txt</legend></fieldset>
    <br>
    <div class="moz-text-plain" wrap="true" graphical-quote="true"
      style="font-family: -moz-fixed; font-size: 12px;" lang="x-unicode">
      <pre wrap="">    THIRD WORKSHOP ON DATA-FLOW EXECUTION MODELS 
        FOR EXTREME SCALE COMPUTING (DFM 2013)
    to be held in conjunction with PACT 2013


    September 8, 2013, Edinburgh, Scotland
    <a class="moz-txt-link-freetext" href="http://www.cs.ucy.ac.cy/dfmworkshop/">http://www.cs.ucy.ac.cy/dfmworkshop/</a>

The First International workshop on .Data-Flow Models (DFM) for extreme scale computing. was held in Galveston Island, Texas in October 2011 in conjunction with PACT 2011. DFM 2012 was held in conjunction with PACT 2012 in Minneapolis, Minnesota in September 2012.

The purpose of DFM continues being to bring together those researchers interested in novel computational models based on Data-Flow principles of execution. The switch to multi-core systems has raised concurrency to the level of a major issue if we are to use the increasing number of cores in a chip.

In the past five decades, sequential computing dominated the computer architecture landscape because designers were successful at building faster and faster computers by solely relying on improvements on fabrication technologies and architectural/organization optimizations. The most severe limitation of the sequential model, namely its inability to tolerate long memory latencies has slowed down the performance gains. This phenomenon is the ubiquitous Memory Wall. While various mechanisms have been implemented to overcome the wall (such as extremely efficient hardware prefetch support for example), they only add to another wall that hampers highly efficient execution of programs and modern chip design: the Power Wall. Power considerations and heat dissipation issues have forced manufacturers to switch to multiple cores per chip and thus move into the concurrency era.

New concurrent models/paradigms are needed in order to fully utilize the potential of Multi-core chips. The Data-flow model is a formal model that can handle concurrency and tolerate memory and synchronization latencies. Data-Flow inspired systems could also be simpler and more power efficient than conventional systems.  Recent work has shown that the Data-Flow principles can be used to develop systems that can outperform systems based on conventional techniques. Thus, it is time to revisit Data-driven computation and bring it to the Multi-core and extreme scale computing.

DFM 2013 solicits novel papers that include but are not limited to:
- Novel Data-Flow inspired Execution models and architectures
- Functional and Single assignment based Languages.
- Strict and non-strict execution models.
- Compilers and tools for Data-Flow/Data-Driven systems.
- Hybrid Data-driven/Control-driven systems.
- Position Papers of on the Future of Data-Flow in the Multi-core era and beyond. 

All accepted papers will appear in the Computer Society Digital Library. Extended versions of the best papers will be published in a special issue of IJPP (International Journal on Parallel Programming).

SUBMISSION INFORMATION
DFM 2013 will accept both Full and Short papers. Full papers should be prepared using the IEEE Proceedings format, and should be no longer than 8 pages. Short Papers should be submitted in the form of extended abstracts/position papers (up to 4 pages).

IMPORTANT DATES
Submission Deadline: July 15th
Notification of Authors: Aug 10th

STEERING COMMITTEE
Skevos Evripidou , University of Cyprus
Guang Gao, University of Delaware 
Jean-Luc Gaudiot, University of California at Irvine 
Vivek Sarkar, Rice University 
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo

PUBLICITY CHAIR
St&eacute;phane Zuckerman, University of Delaware

PROGRAM COMMITTEE 
Skevos Evripidou, University of Cyprus 
Guang Gao, University of Delaware 
Jean-Luc Gaudiot, Univ. of California at Irvine 
Vivek Sarkar, Rice University 
Ian Watson, University of Manchester 
Kei Hiraki, University of Tokyo 
David Abramson, Monash University 
Costas Kyriacou, Frederic University 
Pedro Trancoso, University of Cyprus 
Kyriacos Stavrou, Intel Labs Barcelona, SP 
John Feo, Pacific Northwest National Laboratory 
Bob Iannucci, CMU, Silicon Valley, USA
Wallid Najjar, University of California, Riverside
Wolfgang Karl, Karlsruhe Institute of Technology
Mark Oskin, University of Washington 
Andrew Sohn, NJIT, USA
Reiner Hartenstein, TU  Kaiserslautern
Kemal Ebcio.lu, Global Supercomputing Corp.

PROCEEDING CHAIRS 
Giorgos Michael, University of Cyprus


</pre>
    </div>
    <pre class="moz-signature" cols="72">-- 
St&eacute;phane Zuckerman
Computer Architecture &amp; Parallel Systems Laboratory
University of Delaware &shy;&#8212; 201G Evans Hall, Newark, DE
Work #: +1 302 831-6534  Cell #: +1 302 883-9979</pre>
  </body>
</html>
--------------040604060801090603080201--

--------------070903050103060601000701
Content-Type: text/plain; charset=UTF-8; nameßM2013_CFP.txt
Content-Disposition: attachment; filename="DFM2013_CFP.txt"
Content-Transfer-Encoding: quoted-printable

    THIRD WORKSHOP ON DATA-FLOW EXECUTION MODELS 
        FOR EXTREME SCALE COMPUTING (DFM 2013)
    to be held in conjunction with PACT 2013


    September 8, 2013, Edinburgh, Scotland
    http://www.cs.ucy.ac.cy/dfmworkshop/

The First International workshop on .Data-Flow Models (DFM) for extreme scale computing. was held in Galveston Island, Texas in October 2011 in conjunction with PACT 2011. DFM 2012 was held in conjunction with PACT 2012 in Minneapolis, Minnesota in September 2012.

The purpose of DFM continues being to bring together those researchers interested in novel computational models based on Data-Flow principles of execution. The switch to multi-core systems has raised concurrency to the level of a major issue if we are to use the increasing number of cores in a chip.

In the past five decades, sequential computing dominated the computer architecture landscape because designers were successful at building faster and faster computers by solely relying on improvements on fabrication technologies and architectural/organization optimizations. The most severe limitation of the sequential model, namely its inability to tolerate long memory latencies has slowed down the performance gains. This phenomenon is the ubiquitous Memory Wall. While various mechanisms have been implemented to overcome the wall (such as extremely efficient hardware prefetch support for example), they only add to another wall that hampers highly efficient execution of programs and modern chip design: the Power Wall. Power considerations and heat dissipation issues have forced manufacturers to switch to multiple cores per chip and thus move into the concurrency era.

New concurrent models/paradigms are needed in order to fully utilize the potential of Multi-core chips. The Data-flow model is a formal model that can handle concurrency and tolerate memory and synchronization latencies. Data-Flow inspired systems could also be simpler and more power efficient than conventional systems.  Recent work has shown that the Data-Flow principles can be used to develop systems that can outperform systems based on conventional techniques. Thus, it is time to revisit Data-driven computation and bring it to the Multi-core and extreme scale computing.

DFM 2013 solicits novel papers that include but are not limited to:
- Novel Data-Flow inspired Execution models and architectures
- Functional and Single assignment based Languages.
- Strict and non-strict execution models.
- Compilers and tools for Data-Flow/Data-Driven systems.
- Hybrid Data-driven/Control-driven systems.
- Position Papers of on the Future of Data-Flow in the Multi-core era and beyond. 

All accepted papers will appear in the Computer Society Digital Library. Extended versions of the best papers will be published in a special issue of IJPP (International Journal on Parallel Programming).

SUBMISSION INFORMATION
DFM 2013 will accept both Full and Short papers. Full papers should be prepared using the IEEE Proceedings format, and should be no longer than 8 pages. Short Papers should be submitted in the form of extended abstracts/position papers (up to 4 pages).

IMPORTANT DATES
Submission Deadline: July 15th
Notification of Authors: Aug 10th

STEERING COMMITTEE
Skevos Evripidou , University of Cyprus
Guang Gao, University of Delaware 
Jean-Luc Gaudiot, University of California at Irvine 
Vivek Sarkar, Rice University 
Ian Watson, University of Manchester
Kei Hiraki, University of Tokyo

PUBLICITY CHAIR
Stéphane Zuckerman, University of Delaware

PROGRAM COMMITTEE 
Skevos Evripidou, University of Cyprus 
Guang Gao, University of Delaware 
Jean-Luc Gaudiot, Univ. of California at Irvine 
Vivek Sarkar, Rice University 
Ian Watson, University of Manchester 
Kei Hiraki, University of Tokyo 
David Abramson, Monash University 
Costas Kyriacou, Frederic University 
Pedro Trancoso, University of Cyprus 
Kyriacos Stavrou, Intel Labs Barcelona, SP 
John Feo, Pacific Northwest National Laboratory 
Bob Iannucci, CMU, Silicon Valley, USA
Wallid Najjar, University of California, Riverside
Wolfgang Karl, Karlsruhe Institute of Technology
Mark Oskin, University of Washington 
Andrew Sohn, NJIT, USA
Reiner Hartenstein, TU  Kaiserslautern
Kemal Ebcio.lu, Global Supercomputing Corp.

PROCEEDING CHAIRS 
Giorgos Michael, University of Cyprus

Back to comp.parallel | Previous | Next | Find similar | Unroll thread


Thread

Call for papers: Dataflow Models for Extreme Scale Computing (DFM 2013) Stéphane Zuckerman <szuckerm@eecis.udel.edu> - 2013-07-11 10:16 -0400

csiph-web