Re: Mecrisp setup on TI MSP432 Launchpad

Date	2016-01-02 18:48 +0000
From	Jan Coombs <jenfhaomndgfwutc@murmic.plus.com>
Newsgroups	comp.lang.forth
Subject	Re: Mecrisp setup on TI MSP432 Launchpad
Message-ID	<20160102184819.38674ee3@t500> (permalink)
References	<3ee142d7-2cd3-4059-baf6-c03c6f269ddd@googlegroups.com> <n69320$l7k$1@dont-email.me>

Show all headers | View raw

On Sat, 2 Jan 2016 12:59:58 -0500
rickman <gnuarm@gmail.com> wrote:
[snipped]

As Rick says, you need the mecrisp-stellaris image file, and a
tool to upload this to your micro. The NXP ARM I installed this
on was easy, both using a NXP tool for windows and a command
line tool for linux. 

I couldn't find TI tools on their site, but found this:

http://energia.nu/

I'm not sure how close this development is to TI, but it says it
is open source. It is a complete IDE, so whether you can find
the uploader or build it quickly as a standalone I couldn't
figure. 

If all else fails get a $8? DIL28 NXP part and do initial
mecrisp-stellaris install on that. 

Jan Coombs.

Thread

Mecrisp setup on TI MSP432 Launchpad Chris Curl <ccurl609@gmail.com> - 2015-12-29 14:48 -0800
  Re: Mecrisp setup on TI MSP432 Launchpad rickman <gnuarm@gmail.com> - 2016-01-02 12:59 -0500
    Re: Mecrisp setup on TI MSP432 Launchpad Jan Coombs <jenfhaomndgfwutc@murmic.plus.com> - 2016-01-02 18:48 +0000
      Re: Mecrisp setup on TI MSP432 Launchpad Paul Rubin <no.email@nospam.invalid> - 2016-01-02 21:39 -0800
      Re: Mecrisp setup on TI MSP432 Launchpad Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2016-01-04 12:46 +0100
  Re: Mecrisp setup on TI MSP432 Launchpad Chris Curl <ccurl609@gmail.com> - 2016-01-04 06:21 -0800
    Re: Mecrisp setup on TI MSP432 Launchpad Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2016-01-14 12:25 +0100
      Re: Mecrisp setup on TI MSP432 Launchpad Chris Curl <ccurl609@gmail.com> - 2016-01-14 08:42 -0800

csiph-web