Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.lang.forth > #40717
| Date | 2015-07-20 23:16 +0100 |
|---|---|
| From | Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> |
| Newsgroups | comp.lang.forth |
| Subject | Re: MSP430 Cloning - in contrast to using a programmer |
| Message-ID | <20150720231619.0143396d@HP-6550b> (permalink) |
| References | <8c8825a5-f7f8-4a01-91c4-bcda866952aa@googlegroups.com> <20150719101044.15dfa02c@HP-6550b> <0d02de2e-968e-40e4-90c8-34db5bb59104@googlegroups.com> <20150720081113.398724a1@HP-6550b> <c727a1bb-6d38-4145-aca6-5e7c2bb1205f@googlegroups.com> |
On Mon, 20 Jul 2015 13:09:29 -0700 (PDT) JUERGEN <epldfpga@aol.com> wrote: > > > > > ... For our educational projects it > > > > > is important that MSP430G2553s can be > > > > > programmed without having Launchpads available > > > > [2] MSP430 Programming Via the Bootstrap Loader > > > > (BSL) > > > > http://www.ti.com/lit/ug/slau319j/slau319j.pdf > A Master set of 2 10 pin headers and > a Slave set of 2 10 pin headers > should do the job > or there might be less, depending on where the needed pins are. The six pin header is just right for the target: 0V, ~3V, RxD, TxD, /RST and TEST For the source you need to be able to sequence /RST and TEST correctly to put the target in BSL mode (see pg 6 of BSL Users Guide) These could be driven by any two free pins on the source micro. The target memory can then be written using the serial port protocol detailed in the above Guide. HTH, Jan Coomb. -- email valid, else fix dots and hyphen jan4clf2014@murrayhyphenmicroftdotcodotuk
Back to comp.lang.forth | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-18 12:53 -0700
Re: MSP430 Cloning - in contrast to using a programmer Howerd <howerdo@yahoo.co.uk> - 2015-07-18 18:09 -0700
Re: MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-18 23:14 -0700
Re: MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-19 00:09 -0700
Re: MSP430 Cloning - in contrast to using a programmer Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-07-19 10:10 +0100
Re: MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-19 11:44 -0700
Re: MSP430 Cloning - in contrast to using a programmer Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-07-20 08:11 +0100
Re: MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-20 13:09 -0700
Re: MSP430 Cloning - in contrast to using a programmer Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-07-20 23:16 +0100
Re: MSP430 Cloning - in contrast to using a programmer Howerd <howerdo@yahoo.co.uk> - 2015-07-19 02:49 -0700
Re: MSP430 Cloning - in contrast to using a programmer JUERGEN <epldfpga@aol.com> - 2015-07-19 11:39 -0700
csiph-web