Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > sci.electronics.design > #460081 > unrolled thread

typical power consumption of a 50 inch plasma TV

Back to article view | Back to sci.electronics.design

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  typical power consumption of a 50 inch plasma TV harriszannaka@gmail.com - 2017-05-13 07:37 -0700
    Re: typical power consumption of a 50 inch plasma TV rickman <gnuarm@gmail.com> - 2017-05-13 14:42 -0400
    Re: typical power consumption of a 50 inch plasma TV Robert Baer <robertbaer@localnet.com> - 2017-05-13 22:05 -0800
      Re: typical power consumption of a 50 inch plasma TV Klaus Kragelund <klauskvik@hotmail.com> - 2017-05-16 12:08 -0700
        Re: typical power consumption of a 50 inch plasma TV Don Y <blockedofcourse@foo.invalid> - 2017-05-16 12:19 -0700
        Re: typical power consumption of a 50 inch plasma TV krw@notreal.com - 2017-05-16 20:16 -0400

#460081 — typical power consumption of a 50 inch plasma TV

My TV went out energy saver went out my TV will not come back on any suggestions?

[toc] | [next] | [standalone]

#460108

On 5/13/2017 10:37 AM, harriszannaka@gmail.com wrote:
> My TV went out energy saver went out my TV will not come back on any suggestions?

What?  What does the "energy saver" have to do with it?  Have you tried 
using the power button on the set rather than the remote?  Read the 
manual?  A friend had an old CRT set that would sometimes get messed up 
and you had to unplug the power for some time to allow the 
microprocessor to reset.  Leave the set unplugged for a half hour or 
more, then try it?

-- 

Rick C

[toc] | [prev] | [next] | [standalone]

#460198

harriszannaka@gmail.com wrote:
> My TV went out energy saver went out my TV will not come back on any suggestions?
   Toss it and get a modern "TV" (display/monitor functions included).

[toc] | [prev] | [next] | [standalone]

#460558

I have a 10 year old Pioneer plasma. At one time I was worried about the 350W peak power dissipation, and installed a new high end Panasonic LED

I had to install the old plasma again, was very disappointed with the blackness level and sound quality of the LED

Cheers

Klaus 

[toc] | [prev] | [next] | [standalone]

#460561

On 5/16/2017 12:08 PM, Klaus Kragelund wrote:
> I have a 10 year old Pioneer plasma. At one time I was worried about the
> 350W peak power dissipation, and installed a new high end Panasonic LED
>
> I had to install the old plasma again, was very disappointed with the
> blackness level and sound quality of the LED

+1

We find ourselves gravitating to the old plasma instead of the newer LED.
The LED is... "crisper".  But, almost visually uncomfortably so.  I
liken it to speakers that are too "bright".

(being able to count the pores in an actor's face doesn't leave me
thinking I've had a BETTER viewing experience!)

[toc] | [prev] | [next] | [standalone]

#460607

On Tue, 16 May 2017 12:08:03 -0700 (PDT), Klaus Kragelund
<klauskvik@hotmail.com> wrote:

>I have a 10 year old Pioneer plasma. At one time I was worried about the 350W peak power dissipation, and installed a new high end Panasonic LED
>
>I had to install the old plasma again, was very disappointed with the blackness level and sound quality of the LED

OTOH, I replaced a Panasonic plasma with a Samsung series-9000 SUHD TV
a year ago.  I recently took the plasma out of the box and set it up
in my office and the picture is totally washed out, compared to the
Samsung.

[toc] | [prev] | [standalone]

Back to top | Article view | sci.electronics.design

csiph-web