Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > sci.electronics.design > #518701

Re: World's Worst Soldering!

From Cursitor Doom <curd@notformail.com>
Newsgroups sci.electronics.repair, sci.electronics.design
Subject Re: World's Worst Soldering!
Date 2018-10-08 10:55 +0000
Organization A noiseless patient Spider
Message-ID <ppfd2m$ve3$3@dont-email.me> (permalink)
References <ppdb22$mrp$7@dont-email.me> <3ofkrd1vvsq2oanbnoh5ku6sljpr79rm5v@4ax.com> <ppdp0g$mrp$9@dont-email.me> <19flrd597vqu0is1kvbkgh94lu7r85479a@4ax.com>

Cross-posted to 2 groups.

Show all headers | View raw


On Sun, 07 Oct 2018 19:44:55 -0700, Jeff Liebermann wrote:

> There's your problem.  15 watts is far too small for the heavy gauge
> wire you're using.  The pointed tip is too small to retain enough heat
> to solder some of the larger parts in your photos.  You also didn't
> bother to disclose whether you're using a temperature controlled
> soldering iron or a crappy wood burner.  I'll guess(tm) a wood burner,
> probably with unplated rusted iron tips that can't be cleaned, wetted,
> or tinned.

These are just bog-standard soldering irons with no fancy temp control. 
But their tips are in much better condition than you imagined above, 
thankfully!


> I had problems finding can type electrolytics so I used axial leaded
> electrolytics as a substitute.  They fit inside the old can, so I just
> ripped out the guts from the defective capacitor and crammed the axial
> caps inside.  I used 85C caps which lasted about 6 months.  I replace
> them with 105C caps and they've been running for about 2 years.

Maybe it was the additional 'jacketing' that caused the issue? You'd be 
trapping a layer of warm air in there causing a build up of heat, I'd 
guess?

Thanks for the pep-talk btw. :-)



-- 
This message may be freely reproduced without limit or charge only via 
the Usenet protocol. Reproduction in whole or part through other 
protocols, whether for profit or not, is conditional upon a charge of 
GBP10.00 per reproduction. Publication in this manner via non-Usenet 
protocols constitutes acceptance of this condition.

Back to sci.electronics.design | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-07 16:08 +0000
  Re: World's Worst Soldering! djlocher56@gmail.com - 2018-10-07 10:25 -0700
    Re: World's Worst Soldering! gnuarm.deletethisbit@gmail.com - 2018-10-07 11:15 -0700
  Re: World's Worst Soldering! Jeff Liebermann <jeffl@cruzio.com> - 2018-10-07 10:36 -0700
    Re: World's Worst Soldering! John Robertson <spam@flippers.com> - 2018-10-07 11:58 -0700
      Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-07 13:26 -0700
        Re: World's Worst Soldering! <698839253X6D445TD@nospam.org> - 2018-10-07 20:36 +0000
          Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-07 15:46 -0700
        Re: World's Worst Soldering! John Robertson <spam@flippers.com> - 2018-10-07 13:41 -0700
        Re: World's Worst Soldering! jurb6006@gmail.com - 2018-10-07 22:56 -0700
          Re: World's Worst Soldering! Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2018-10-08 10:01 -0400
      Re: World's Worst Soldering! Jeff Liebermann <jeffl@cruzio.com> - 2018-10-07 19:09 -0700
    Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-07 20:06 +0000
      Re: World's Worst Soldering! Jeff Liebermann <jeffl@cruzio.com> - 2018-10-07 19:44 -0700
        Re: World's Worst Soldering! Ralph Mowery <rmowery28146@earthlink.net> - 2018-10-07 23:30 -0400
        Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-08 10:55 +0000
      Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-07 21:26 -0700
        Re: World's Worst Soldering! bitrex <user@example.net> - 2018-10-08 02:20 -0400
        Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-08 10:57 +0000
  Re: World's Worst Soldering! Steff <e-post.nu@gmx.com> - 2018-10-07 19:56 +0200
  Re: World's Worst Soldering! mpm <mpmillard@aol.com> - 2018-10-07 11:19 -0700
  Re: World's Worst Soldering! <698839253X6D445TD@nospam.org> - 2018-10-07 18:58 +0000
    Re: World's Worst Soldering! DecadentLinuxUserNumeroUno@decadence.org - 2018-10-08 01:00 +0000
      Re: World's Worst Soldering! Ralph Mowery <rmowery28146@earthlink.net> - 2018-10-07 23:36 -0400
  Re: World's Worst Soldering! bitrex <user@example.net> - 2018-10-07 21:36 -0400
    Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-07 19:34 -0700
      Re: World's Worst Soldering! bitrex <user@example.net> - 2018-10-07 22:58 -0400
        Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-07 20:59 -0700
      Re: World's Worst Soldering! John Robertson <spam@flippers.com> - 2018-10-07 22:53 -0700
        Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-08 01:08 -0700
          Re: World's Worst Soldering! John Robertson <spam@flippers.com> - 2018-10-08 08:26 -0700
            Re: World's Worst Soldering! bitrex <user@example.net> - 2018-10-08 11:45 -0400
      Re: World's Worst Soldering! <698839253X6D445TD@nospam.org> - 2018-10-08 07:42 +0000
  Re: World's Worst Soldering! Jasen Betts <jasen@xnet.co.nz> - 2018-10-08 02:13 +0000
    Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-08 10:39 +0000
  Re: World's Worst Soldering! The Real Bev <bashley101@gmail.com> - 2018-10-07 22:33 -0700
    Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-08 01:12 -0700
      Re: World's Worst Soldering! <698839253X6D445TD@nospam.org> - 2018-10-08 15:01 +0000
        Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-09 17:45 +0000
          Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-09 17:47 +0000
  Re: World's Worst Soldering! Boris Mohar <borism_void_@sympatico.ca> - 2018-10-08 04:36 -0400
    Re: World's Worst Soldering! John Larkin <jjlarkin@highlandtechnology.com> - 2018-10-08 08:59 -0700
      Re: World's Worst Soldering! John Robertson <spam@flippers.com> - 2018-10-08 10:01 -0700
        Re: World's Worst Soldering! <698839253X6D445TD@nospam.org> - 2018-10-08 18:18 +0000
    Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-09 17:58 +0000
  Re: World's Worst Soldering! Look165 <look165@numericable.fr> - 2018-10-08 11:08 +0200
    Re: World's Worst Soldering! Cursitor Doom <curd@notformail.com> - 2018-10-08 10:49 +0000
      Re: World's Worst Soldering! Look165 <look165@numericable.fr> - 2018-10-08 13:05 +0200
  Re: World's Worst Soldering! Tom Gardner <spamjunk@blueyonder.co.uk> - 2018-10-08 17:00 +0100

csiph-web