Groups > microsoft.public.excel.programming > #109545 > unrolled thread

File cannot be accessed

Started by	admin@farmenergyconsulting.co.uk
First post	2016-11-05 06:35 -0700
Last post	2016-11-11 17:05 +0000
Articles	11 — 7 participants

Back to article view | Back to microsoft.public.excel.programming

  File cannot be accessed admin@farmenergyconsulting.co.uk - 2016-11-05 06:35 -0700
    Re: File cannot be accessed "Auric__" <not.my.real@email.address> - 2016-11-06 15:31 +0000
      Re: File cannot be accessed admin@farmenergyconsulting.co.uk - 2016-11-08 08:41 -0800
        Re: File cannot be accessed "bart.smissaert@gmail.com" <bart.smissaert@gmail.com> - 2016-11-11 03:02 -0800
          Re: File cannot be accessed admin@farmenergyconsulting.co.uk - 2016-12-19 00:11 -0800
    Re: File cannot be accessed piatzseo <piatzseo@gmail.com> - 2016-11-07 04:08 +0000
    Re: File cannot be accessed Robert Baer <robertbaer@localnet.com> - 2016-11-07 20:01 -0800
      Re: File cannot be accessed admin@farmenergyconsulting.co.uk - 2016-11-08 08:38 -0800
        Re: File cannot be accessed GS <gs@v.invalid> - 2016-11-08 12:58 -0500
          Re: File cannot be accessed admin@farmenergyconsulting.co.uk - 2016-11-08 11:01 -0800
    Re: File cannot be accessed Dogthientruong937 <Dogthientruong937@gmail.com> - 2016-11-11 17:05 +0000

#109545 — File cannot be accessed

From	admin@farmenergyconsulting.co.uk
Date	2016-11-05 06:35 -0700
Subject	File cannot be accessed
Message-ID	<52bdc08e-9c90-4a9e-bf54-713feb87362f@googlegroups.com>

Hi
I have a macro that sequentially opens data files (csv data in .rnd files), copies data to the main workbook, then closes the file. This normally works well but when the number of files reaches some arbitrary number, around 200, I get the message: Filename "cannot be accessed.The file may be corrupted, located on a server that is not working or read-only."
If I process in blocks of less than 150 the same file opens without problems. It would be good though to keep all 250 files together. Any ideas of how to avoid the issue?
Thanks,
Rod

[toc] | [next] | [standalone]

#109553

From	"Auric__" <not.my.real@email.address>
Date	2016-11-06 15:31 +0000
Message-ID	<XnsA6B856CB5AFD5auricauricauricauric@213.239.209.88>
In reply to	#109545

"Rod" wrote:

> I have a macro that sequentially opens data files (csv data in .rnd
> files), copies data to the main workbook, then closes the file. This
> normally works well but when the number of files reaches some arbitrary
> number, around 200, I get the message: Filename "cannot be accessed.The
> file may be corrupted, located on a server that is not working or
> read-only."
> If I process in blocks of less than 150 the same file opens without
> problems. It would be good though to keep all 250 files together. Any
> ideas of how to avoid the issue?

Post the code that's giving you trouble.

-- 
I'm not sure if you're serious, or trolling the troll.

[toc] | [prev] | [next] | [standalone]

#109563

From	admin@farmenergyconsulting.co.uk
Date	2016-11-08 08:41 -0800
Message-ID	<0d1d226c-6f97-4e15-8e9b-b165e1791563@googlegroups.com>
In reply to	#109553

On Sunday, November 6, 2016 at 3:32:00 PM UTC, Auric__ wrote:
> "Rod" wrote:
> 
> > I have a macro that sequentially opens data files (csv data in .rnd
> > files), copies data to the main workbook, then closes the file. This
> > normally works well but when the number of files reaches some arbitrary
> > number, around 200, I get the message: Filename "cannot be accessed.The
> > file may be corrupted, located on a server that is not working or
> > read-only."
> > If I process in blocks of less than 150 the same file opens without
> > problems. It would be good though to keep all 250 files together. Any
> > ideas of how to avoid the issue?
> 
> Post the code that's giving you trouble.
> 
> -- 
> I'm not sure if you're serious, or trolling the troll.

Thanks for your reply. I am serious but I dont see the benefit of posting a large amount of code most of which is irrelevant. The bits that open and close the files are standard and work most of the time. However I suspect that a buffer is getting filled, or something. I just wondered if anyone had seen anything similar before.

[toc] | [prev] | [next] | [standalone]

#109567

From	"bart.smissaert@gmail.com" <bart.smissaert@gmail.com>
Date	2016-11-11 03:02 -0800
Message-ID	<ce5ac2c5-4ff5-48e5-96b3-1afbc748eb0d@googlegroups.com>
In reply to	#109563

Do you have proper error handling?
What could happen is that a file was opened but not closed as your code ended
prematurely due to an error.

RBS


On Tuesday, 8 November 2016 16:41:48 UTC, ad...@farmenergyconsulting.co.uk  wrote:
> On Sunday, November 6, 2016 at 3:32:00 PM UTC, Auric__ wrote:
> > "Rod" wrote:
> > 
> > > I have a macro that sequentially opens data files (csv data in .rnd
> > > files), copies data to the main workbook, then closes the file. This
> > > normally works well but when the number of files reaches some arbitrary
> > > number, around 200, I get the message: Filename "cannot be accessed.The
> > > file may be corrupted, located on a server that is not working or
> > > read-only."
> > > If I process in blocks of less than 150 the same file opens without
> > > problems. It would be good though to keep all 250 files together. Any
> > > ideas of how to avoid the issue?
> > 
> > Post the code that's giving you trouble.
> > 
> > -- 
> > I'm not sure if you're serious, or trolling the troll.
> 
> Thanks for your reply. I am serious but I dont see the benefit of posting a large amount of code most of which is irrelevant. The bits that open and close the files are standard and work most of the time. However I suspect that a buffer is getting filled, or something. I just wondered if anyone had seen anything similar before.

[toc] | [prev] | [next] | [standalone]

#109760

From	admin@farmenergyconsulting.co.uk
Date	2016-12-19 00:11 -0800
Message-ID	<2e132d12-0829-483a-a7f4-c7f8181e1742@googlegroups.com>
In reply to	#109567

This issue disappeared when I upgraded to Excel 2016. It appears that Excel 2010 was overloaded by opening so many files and creating a spreadsheet of around 1 GB. xl2016 copes well using either 32 and 64 bit versions.
thanks,
Rod

[toc] | [prev] | [next] | [standalone]

#109555

From	piatzseo <piatzseo@gmail.com>
Date	2016-11-07 04:08 +0000
Message-ID	<piatzseo.1265bd38@excelbanter.com>
In reply to	#109545

admin@farmenergyconsulting.co.uk;1626708 Wrote: 
> Hi I have a macro that sequentially opens data files (csv data in .rnd
> files), copies data to the main workbook, then closes the file. This
> normally works well but when the number of files reaches some arbitrary
> number, around 200, I get the message: Filename &quot;cannot be
> accessed.The file may be corrupted, located on a server that is not
> working or read-only.&quot; If I process in blocks of less than 150 the
> same file opens without problems. It would be good though to keep all
> 250 files together. Any ideas of how to avoid the issue? Thanks, Rod BÃ*i Ä‘Äƒng sao nhiá»u link tháº¿. Ä‘á»«ng spam nha báº¡n




-- 
piatzseo

[toc] | [prev] | [next] | [standalone]

#109561

From	Robert Baer <robertbaer@localnet.com>
Date	2016-11-07 20:01 -0800
Message-ID	<y6cUz.40597$dF2.17011@fx44.iad>
In reply to	#109545

admin@farmenergyconsulting.co.uk wrote:
> Hi
> I have a macro that sequentially opens data files (csv data in .rnd files), copies data to the main workbook, then closes the file. This normally works well but when the number of files reaches some arbitrary number, around 200, I get the message: Filename "cannot be accessed.The file may be corrupted, located on a server that is not working or read-only."
> If I process in blocks of less than 150 the same file opens without problems. It would be good though to keep all 250 files together. Any ideas of how to avoid the issue?
> Thanks,
> Rod
   I think so.
   The problem is made by having to many file handles, and the only way 
that has a chance of preventing that is to close the files as soon as 
possible: (open | read/copy | close) repeat for next file.

[toc] | [prev] | [next] | [standalone]

#109562

From	admin@farmenergyconsulting.co.uk
Date	2016-11-08 08:38 -0800
Message-ID	<f2506e0e-a7d3-46b2-be16-4a06e539c77f@googlegroups.com>
In reply to	#109561

Many thanks for this - I think you are right but cannot see a work around as I do shut the files as soon as I have copied the data I need.
I only ever have two files open at one time.
Regards,
Rod

[toc] | [prev] | [next] | [standalone]

#109564

From	GS <gs@v.invalid>
Date	2016-11-08 12:58 -0500
Message-ID	<nvt3nf$b5g$1@dont-email.me>
In reply to	#109562

> Many thanks for this - I think you are right but cannot see a work 
> around as I do shut the files as soon as I have copied the data I 
> need. I only ever have two files open at one time. Regards,
> Rod

If you use ADODB to pull your data you won't have to open any files. 
Here's where to start...

  http://www.appspro.com/conference/DatabaseProgramming.zip

-- 
Garry

Free usenet access at http://www.eternal-september.org
Classic VB Users Regroup!
  comp.lang.basic.visual.misc
  microsoft.public.vb.general.discussion

[toc] | [prev] | [next] | [standalone]

#109565

From	admin@farmenergyconsulting.co.uk
Date	2016-11-08 11:01 -0800
Message-ID	<e2a18e98-a510-4bf9-be7e-fc69452e4426@googlegroups.com>
In reply to	#109564

> 
> If you use ADODB to pull your data you won't have to open any files. 
> Here's where to start...
> 
>   http://www.appspro.com/conference/DatabaseProgramming.zip
> 
> -- 
> Garry

Great idea! I'll look into it.
Many thanks,
Rod

[toc] | [prev] | [next] | [standalone]

#109568

From	Dogthientruong937 <Dogthientruong937@gmail.com>
Date	2016-11-11 17:05 +0000
Message-ID	<Dogthientruong937.126bba08@excelbanter.com>
In reply to	#109545

Kinh táº¿ ngÃ*y má»™t   tÄƒng trÆ°á»Ÿng  nÃªn  Ä‘a dáº¡ng   nhÃ* cung
cáº¥p  rÃºt háº§m cáº§u Ä‘ua nhau  thÃ*nh láº*p , dÃ¢n cÆ° tÃ¢p trung
Ä‘Ã´ng Ä‘Ãºc, hÃ*ng ngÃ*y tháº£i ra mÃ´i trÆ°á»ng hÃ*ng trÄƒm táº¥n
rÃ¡c tháº£i,  gáº§n nhÆ°  cÃ¡c  gia Ä‘Ã¬nh Ä‘á»u  sá»Ÿ há»¯u  nhÃ* vá»‡
sinh theo tiá»ƒu chuáº©n an toÃ*n vá»‡ sinh,  báº£o kÃª sá»©c khá»e. 
khÃ´ng nhá»¯ng tháº¿  trong  cÃ´ng Ä‘oáº¡n   dÃ¹ng ko   trÃ¡nh khá»i
nhá»¯ng  sá»± cá»‘ vÃ¬  Ä‘a dáº¡ng  lÃ½ do khÃ¡c nhau nhÆ° há»‡ thá»‘ng
vá»‡ sinh xÃ¢y dÆ°ng khÃ´ng  Ä‘Ãºng kÄ© thuáº*t, trong  giai Ä‘oáº¡n 
xá»* dá»¥ng bá» giáº¥y vá»‡ sinh vÃ*o gÃ¢y táº¯c ngháº½n...

Báº¡n gáº·p  rá»‘i ráº¯m vá» háº§m cáº§u, táº¯c ngháº½n, mÃ¹i hÃ´i
thá»‘i khÃ³ chá»‹u. LÃ½ do háº§m cáº§u, há»‘ ga báº¡n quÃ¡ Ä‘áº§y cáº§n
pháº£i Ä‘Æ°á»£c '*rut ham cau*' (http://ruthamcausach.com/), náº¡o vÃ©t
há»‘ ga, thÃ´ng cáº§u cá»‘ng  chÃ³ng vÃ¡nh. Giai phÃ¡p  ngá»«ng thi
cÃ´ngÄÃ¢y  lÃ* hÃ£y chá»n  cÃ´ng ty  RÃºt háº§m cáº§u, thÃ´ng cáº§u
cá»‘ng ngháº¹t há»‘ ga chuyÃªn  nhÃ* sáº£n xuáº¥t rÃºt háº§m cáº§u
nhiá»u nÄƒm kinh nghiá»‡m , thÃ´ng cáº§u cá»‘ng ngháº¹t, xá»* lÃ½ cÃ¡c 
há»‡ thá»‘ng nÆ°á»›c tháº£i, vÃ* náº¡o vÃ©t há»‘ ga.

RÃºt háº§m cáº§u, thÃ´ng cáº§u cá»‘ng ngháº¹t há»‘ ga táº¡i TP HCM
cháº¥t lÆ°á»£ng  sá»Ÿ há»¯u  hÆ¡n 10 nÄƒm kinh nghiá»‡m vÃ* uy tÃ*n
trong  ngÃ*nh nghá», báº£o hÃ*nh 100%. Sá»‘ Ä‘iá»‡n thoáº¡i RÃºt háº§m
cáº§u: 0945.120.565

RÃºt háº§m cáº§u, thÃ´ng cáº§u cá»‘ng ngháº¹t há»‘ ga uy tÃ*n  cÃ³ hÆ¡n
10 nÄƒm kinh nghiá»‡m  cá»™ng  lá»±c lÆ°á»£ng  nhiá»u nÄƒm kinh
nghiá»‡m  trÃªn 100 ká»¹ thuáº*t  viÃªn lÃ*nh nghá»,  nhiá»‡t liá»‡t ,
vui váº» - chuyÃªn nháº*n: rÃºt háº§m cáº§u giÃ¡  tá»‘t, thÃ´ng cá»‘ng
ngháº¹t,  chá»‘ng nÆ°á»›c, chá»‘ng hÃ´i nhÃ* vá»‡ sinh, vÃ*  sá»*a sang
nhÃ* giÃ¡ pháº£i chÄƒng  táº¡i  pháº§n nhiá»u  nhá»¯ng   huyá»‡n 
thuá»™c TP HCM.



RÃºt háº§m cáº§u, thÃ´ng cáº§u cá»‘ng ngháº¹t há»‘ ga chÃºng tÃ´i luÃ´n
Ä‘áº·t sá»±  chÃ¢n thÃ*nh  vÃ* uy tÃ*n lÃªn  hÃ*ng Ä‘áº§u, tuyá»‡t
Ä‘á»‘i ko  Ä‘á»ƒ xáº£y ra cÃ¡c   hiá»‡n tráº¡ng  cháº·t chÃ©m  ngÆ°á»i
dÃ¹ng . Sá»± cháº¥p nháº*n  cá»§a quÃ* khÃ¡ch lÃ* danh dá»± cho táº*p
thá»ƒ anh em chÃºng tÃ´i.



tá»• chá»©c RÃºt háº§m cáº§u, '*thong cong nghet*'
(http://ruthamcausach.com/thong-cong-nghet) há»‘ ga chÃºng tÃ´i  chuyÃªn
dá»¥ng cho   ngÆ°á»i dÃ¹ng  mang  PhÆ°Æ¡ng ChÃ¢m: UY TÃN â€“ chuyÃªn
nghiá»‡p  â€“  háº¿t dáº¡  â€“ Báº¢O HÃ€NH  ká»¹ cÃ*ng  -GIÃ pháº£i
chÄƒng .  bÃ¢y giá»  máº*t Ä‘á»™ dÃ¢n sá»‘ cÃ*ng  nÃ¢ng cao vá» vá»‡
sinh mÃ´i trÆ°á»ng Ä‘Æ°á»£c  Ä‘á»ƒ Ã½  hÃ*ng Ä‘áº§u.



- Vá» phÆ°Æ¡ng chÃ¢m hoáº¡t Ä‘á»™ng :  doanh nghiá»‡p  rut  ham mÃª cau
Ä‘Æ°a ra  má»¥c tiÃªu  vá» cháº¥t lÆ°á»£ng pháº£i  ráº»  , giÃ¡ cáº£
pháº£i á»•n Ä‘á»‹nh Ä‘áº·t uy tÃ*n lÃªn hÃ*ng Ä‘áº§u .

- Vá» Ä‘á»™i ngÅ©  nhÃ¢n viÃªn  : táº*n tÃ¬nh ,  chÄƒm chÃºt  nhiá»u
nÄƒm kinh nghiá»‡m  giÃ*u kinh nghiá»‡m trong lÄ©nh vá»±c  thÃ´ng cáº§u
ngháº¹t, thÃ´ng cá»‘ng ngháº¹t, náº¡o vÃ©t hÃ´ ga .

- Xe rut  mÃª say  cau gia re chuyÃªn dá»¥ng  khoa há»c   hiá»‡n Ä‘áº¡i
: ÄÃ¢y lÃ*  má»™t  máº«u  xe chuyÃªn dá»¥ng  vá»›i  gáº§n nhÆ°  
nhá»¯ng tÃ*nh nÄƒng  hiá»‡n Ä‘áº¡i  khiáº¿n  viá»‡c  sá»Ÿ há»¯u hiá»‡u
suáº¥t cao vÃ* cháº¥t lÆ°á»£ng. NÃ³ Ä‘Æ°á»£c  tá»• chá»©c   Ä‘áº§u cÆ¡ 
Ä‘á»ƒ táº¡o ra má»i nhu cáº§u cá»§a  ngÆ°á»i mua, xe cÃ³   phá»• quÃ¡t
kÃ*ch cá»Ÿ khÃ¡c nhau phÃ¹ há»£p   vá»›i  phá»• thÃ´ng khu vá»±c cháº*t
háº¹p.

-  doanh nghiá»‡p  rut  ham  cau Ä‘Æ°a ra má»¥c tiÃªu  vá» cháº¥t
lÆ°á»£ng pháº£i  tháº¥p , giÃ¡ cáº£ pháº£i á»•n Ä‘á»‹nh Ä‘áº·t uy tÃ*n
lÃªn hÃ*ng Ä‘áº§u .

- MÃ¡y thá»•i thÃ´ng cáº§u cá»‘ng ngháº¹t, thÃ´ng táº¯c toilet, thoÃ¡t
sÃ*n, mÃ¡y dÃ¢y xoáº¯n cÃ¡p, kÃ©o quáº£ tá»i, xe beng 5-8-15m3  hÃ²m .
MÃ¡y xÃºc Ä‘Ã*o háº§m, há»‘ ga, cá»‘ng rÃ£nh, mÆ°Æ¡ng thoÃ¡t nÆ°á»›c.

cÃ´ng ty  RÃºt háº§m cáº§u, thÃ´ng cáº§u cá»‘ng ngháº¹t há»‘ ga chÃºng
tÃ´i cam káº¿t giÃ¡ cáº£ pháº£i lÃ* tháº¥p  nháº¥t ...vÃ¬ doanh nghiá»‡p
chÃºng tÃ´i hoáº¡t Ä‘á»™ng lÃ¢u nÄƒm nÃªn quÃ½  cÃ¡c báº¡n  yÃªu máº¿n 
bá»Ÿi váº*y   Ä‘Æ¡n vá»‹ chÃºng  ná»“ng nhiá»‡t   phá»¥c vá»¥  Anh chá»‹
cÃ³  phÆ°Æ¡ng chÃ¢m 'KhÃ¡ch hÃ*ng lÃ* thÆ°á»£ng Ä‘áº¿'.

DÃ¹ báº¡n  vÆ°á»›ng máº¯c  gÃ¬  lá»›n hay nhá» can há»‡   tá»›i háº§m
cáº§u, khu vá»‡ sinh thÃ¬ hÃ£y gá»i ngay cho chÃºng tÃ´i sáº½ cáº¥p
tá»‘c xá»* lÃ½  khÃ´ng Ä‘á»ƒ láº¡i mÃ¹i hÃ´i, rÃ² rá»‰ nÆ°á»›c, gÃ³p
pháº§n  báº£o vá»‡  mÃ´i trÆ°á»ng,  mang Ä‘áº¿n  báº§u  khÃ´ng khÃ*
trong lÃ*nh  vÃ* ko  vi khuáº©n nháº±m  kiá»ƒm soÃ¡t an ninh  sá»©c
khá»e cá»™ng  Ä‘á»“ng.

quÃ½ khÃ¡ch  ko  cáº§n Ä‘á»£i lÃ¢u, chá»‰ cáº§n nháº¥c mÃ¡y, 15'  viÃªn
chá»©c sáº½  cÃ³  máº·t  dÃ² há»i vÃ* Ä‘Æ°a giÃ¡ ráº»  nháº¥t, Ä‘áº£m
báº£o cháº¥t lÆ°á»£ng vÃ* uy tÃ*n nháº¥t, báº£o hÃ*nh liÃªn tá»¥c
,thÆ°á»ng xuyÃªn,  nhÃ* cung cáº¥p  24/24h,khÃ´ng  ngáº¯t quÃ£ng. 
thanh toÃ¡n  phá»• biáº¿n  hÃ¬nh thá»©c, nhÆ° phiáº¿u thu, hÃ³a Ä‘Æ¡n
VAT, tiá»n máº·t hoáº·c chuyá»ƒn khoáº£n...Báº¡n sáº½ khÃ´ng  cáº§n
pháº£i  lo láº¯ng  náº¿u nhÆ°   Ä‘áº¿n  sá»Ÿ há»¯u  chÃºng tÃ´i, vÃ¬
sá»± uy tÃ*n vÃ*  dÃ²ng  tÃ¢m cá»§a  cÃ¡c  Ä‘á»™i ngÅ©  viÃªn chá»©c
ká»· luáº*t,  giáº£ dá»¥   cÃ³  báº¥t cá»© pháº£n há»“i vá» cháº¥t
lÆ°á»£ng  nhÃ* sáº£n xuáº¥t , hoáº·c thÃ¡i Ä‘á»™, giÃ¡ cáº£...



nhÃ* cung cáº¥p  hÃºt háº§m cáº§u, thÃ´ng cáº§u cá»‘ng ngháº¹t, há»‘ ga
Ä‘Ã£ hoáº¡t Ä‘á»™ng  phá»• thÃ´ng  cÃ¡c quáº*n  huyÃªn  Ä‘Ã´ thá»‹  há»“
chÃ* minh.  doanh nghiá»‡p  hÃºt háº§m cáº§u Ä‘Æ°á»£c hoáº¡t Ä‘á»™ng
tá»«ng khu vá»±c  cÃ¡c huyá»‡n  má»™t ,2,3,4,5,6,7,8,9,10,11,12, 
huyá»‡n  TÃ¢n PhÃº.  huyá»‡n  TÃ¢n BÃ¬nhâ€¦.

ChÃºng tÃ´i  cung á»©ng  nhá»¯ng nhÃ* sáº£n xuáº¥t  vá»‡ sinh mÃ´i
trÆ°á»ng  giá»i, [/b]'*thong cong nghet quan 11*'
(http://tinyurl.com/zoudeh7) vÃ* pháº§n Ä‘Ã´ng  cÃ¡c  thá»‹ xÃ£  huyá»‡n
tphcm sá»Ÿ há»¯u  nhá»¯ng   loáº¡i   dÆ°á»ng nhÆ°  sau.

- RÃºt háº§m cáº§u,  cÃ¡c cháº¥t tháº£i dáº§u má»¡, há»‘ ga, cá»‘ng
rÃ£nhâ€¦  sá»Ÿ há»¯u   phá»• quÃ¡t   cÃ¡i  xe to  nhá» khÃ¡c nhau
báº±ng xe chuyÃªn dá»¥ng  ká»¹ thuáº*t má»›i  khÃ¡ch hÃ*ng  vá»›i  nhu
cáº§u xe chiáº¿c  nÃ*o  tá»• chá»©c  cÅ©ng Ä‘Ã¡p á»©ng Ä‘á»§.

- Uy tÃ*n  váº*n táº£i Ä‘Ãºng Ä‘á»§ khá»‘i lÆ°á»£ng

- ThÃ´ng cáº§u, cá»‘ng ngháº¹t, thÃ´ng táº¯c bá»“n cáº§u, Ä‘Æ°á»ng 
cá»‘ng toilet bá»‹ ngháº¹t báº±ng há»‡ thá»‘ng mÃ¡y mÃ³c  hiá»‡n Ä‘áº¡i 
nháº*p kháº©u  trong khoáº£ng  nÆ°á»›c ngoÃ*i vá».

- ThÃ´ng ngháº¹t trá»¥c Ä‘Æ°á»ng  á»‘ng nÆ°á»›c, sÃ*n nÆ°á»›c, bá»“n
rá»*a chÃ©n, la va bo, bá»“n cáº§u bá»‹ táº¯c ngháº½n.

- Náº¡o vÃ©t há»‘ ga, thÃ´ng cá»‘ng ngháº¹t cho cÃ¡c  há»™ gia Ä‘Ã¬nh,
khu táº*p thá»ƒ, chung cÆ°â€¦

- ÄÃ*o háº§m má»›i, xÃ¢y sá»*a háº§m cáº§u cÅ©, nÃ¢ng háº§m cho nhá»¯ng
há»™ gia Ä‘Ã¬nh hay  tá»• chá»©c  sá»Ÿ há»¯u  nhu cáº§u.

- ÄÃ*o Ä‘áº·t  tuyáº¿n phá»‘  cá»‘ng cáº¥p thoÃ¡t nÆ°á»›c tháº£i cho 
cÃ¡c há»™ gia Ä‘Ã¬nh

- Nháº*n  sang sá»*a la va bo, bá»“n cáº§u, thay vÃ*  tu sá»*a bá»“n
cáº§u khÃ´ng  cáº¥p nÆ°á»›c, thoÃ¡t nÆ°á»›câ€¦

- Nháº*n  chá»‘ng tháº¥m tÆ°á»ng nhÃ*,tráº§n nhÃ*,chá»‘ng hÃ´i khu
vá»±c toilet  Ä‘áº·c thÃ¹ sá»* lÃ½ dá»©t Ä‘iá»ƒm mÃ¹i hÃ´i ko  bá»‹ hÃ´i
láº¡iâ€¦.vÃ* cÃ²n  nhiá»u  dá»‹ch vá»¥  khÃ¡c can há»‡   Ä‘áº¿n vá»‡
sinh mÃ´i trÆ°á»ng.

- ThoÃ¡t nÆ°á»›c vÃ*  chuyÃªn chá»Ÿ  bÃ¹n háº§m cáº§u.

- ThÃ´ng cáº§u cá»‘ng ngháº¹t.

- RÃºt háº§m cáº§u, cháº¥t tháº£i dáº§u má»¡, cháº¥t tháº£i cÃ´ng
nghiá»‡p.

- ThÃ´ng cáº§u cá»‘ng ngháº¹t báº±ng há»‡ thá»‘ng  váº*t dá»¥ng  chuyÃªn
dá»¥ng.

- tu chá»‰nh  vÃ* láº¯p Ä‘áº·t há»‡ thá»‘ng thoÃ¡t nÆ°á»›c tháº£i.

- ThÃ´ng ngháº¹t  con Ä‘Æ°á»ng  á»‘ng nÆ°á»›c, sÃ*n rá»*a chÃ©n,
lavabo, bá»“n cáº§uâ€¦

- Náº¡o vÃ©t há»‘ ga, cÃ¡c con phá»‘  á»‘ng thoÃ¡t nÆ°á»›c, chá»‘ng
hÃ´i.

- Láº¯p Ä‘áº·t  nhÃ* xÃ* , Ä‘á»• bi...nhanh sáº¡ch sáº½.

- XÃ¢y sá»*a há»‘ ga, háº§m cáº§u . Äáº·t  trá»¥c Ä‘Æ°á»ng  á»‘ng
thoÃ¡t nÆ°á»›c.

- Báº£o trÃ¬ há»‡ thá»‘ng thoÃ¡t nÆ°á»›c cho cÃ¡c   Ä‘Æ¡n vá»‹ , xÃ*
nghiá»‡p, nhÃ* hÃ*ng khÃ¡ch sáº¡nâ€¦

RÃºt háº§m cáº§u, hÃºt cháº¥t tháº£i dáº§u má»¡, cháº¥t tháº£i cÃ´ng
nghiá»‡p, Ä‘Ã*o vÃ* hÃºt há»‘ ga, cá»‘ng rÃ£nhâ€¦  vá»›i   phá»• thÃ´ng 
loáº¡i  xe mang  sá»©c cáº¥t  lá»›n  nhá» khÃ¡c nhau (tÃ¹y thuá»™c 
ngÆ°á»i mua  Ä‘á» nghá»‹  xe:tá»« hai  khá»‘i â€¦)

- Uy tÃ*n  chuyÃªn chá»Ÿ  Ä‘Ãºng Ä‘á»§ khá»‘i lÆ°á»£ng theo nhÆ°  thá»a
thuáº*n  ban Ä‘áº§u.

- ThÃ´ng cá»‘ng ngháº¹t, thÃ´ng táº¯c bá»“n cáº§u, thÃ´ng táº¯c nhÃ*
vá»‡ sinh, thÃ´ng bá»ƒ phá»‘t bá»‹ táº¯c,  tuyáº¿n Ä‘Æ°á»ng  cá»‘ng
toilet bá»‹ ngháº¹t báº±ng há»‡ thá»‘ng mÃ¡y mÃ³c  hiá»‡n Ä‘áº¡i nháº¥t
Ä‘áº£m báº£o ko  Ä‘á»¥c phÃ¡ ná»n vÃ*  ko  khiáº¿n cho  xáº¥u ngÃ´i
nhÃ* cá»§a  quÃ½ khÃ¡ch.

- ThÃ´ng ngháº¹t  tuyáº¿n Ä‘Æ°á»ng  á»‘ng nÆ°á»›c, sÃ*n nÆ°á»›c, bá»“n
rá»*a chÃ©n, la va bo, bá»“n cáº§u bá»‹ táº¯c ngháº½n sá»* dá»¥ng mÃ¡y 
mÃ³c  tiÃªn tiáº¿n.

- Náº¡o vÃ©t há»‘ ga, thÃ´ng cá»‘ng ngháº¹t Ä‘Ã³ng bao  chuyá»ƒn váº*n 
Ä‘i Ä‘á»• Ä‘Ãºng nÆ¡i quy Ä‘á»‹nh cho  cÃ¡c há»™ gia Ä‘Ã¬nh, khu táº*p
thá»ƒ, crung cÆ° â€¦cÃ³ nhu cáº§u.

- ÄÃ*o háº§m má»›i, xÃ¢y sá»*a háº§m cáº§u cÅ©, nÃ¢ng háº§m, lÃ³t
gáº¡ch â€¦

- ÄÃ*o Ä‘áº·t  tuyáº¿n phá»‘  cá»‘ng cáº¥p thoÃ¡t nÆ°á»›c tháº£i cho 
nhá»¯ng há»™ gia Ä‘Ã¬nh.

-  tÃ´n táº¡o  labo, bá»“n cáº§u, thay vÃ*  tu bá»• bá»“n cáº§u  ko
cáº¥p nÆ°á»›c, thoÃ¡t nÆ°á»›câ€¦

Má»i váº¥n Ä‘á» vá» cáº§u cá»‘ng, háº§m cáº§u, nhÃ* vá»‡ sinh, labo,
bá»“n tiá»ƒu ... xin vui lÃ²ng liÃªn há»‡: ruthamcausach.com -
0945.120.565




-- 
Dogthientruong937

[toc] | [prev] | [standalone]

csiph-web

File cannot be accessed

Contents

#109545 — File cannot be accessed

#109553

#109563

#109567

#109760

#109555

#109561

#109562

#109564

#109565

#109568