Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1736900 > unrolled thread

[PATCH 3/7] ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N

Started byJerome Brunet <jbrunet@baylibre.com>
First post2017-09-21 19:20 +0200
Last post2017-09-21 19:20 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH 3/7] ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N Jerome Brunet <jbrunet@baylibre.com> - 2017-09-21 19:20 +0200

#1736900 — [PATCH 3/7] ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N

FromJerome Brunet <jbrunet@baylibre.com>
Date2017-09-21 19:20 +0200
Subject[PATCH 3/7] ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N
Message-ID<usdiN-3Se-1@gated-at.bofh.it>
TEST_N has moved from the EE controller to the AO controller so
the gpio-ranges need to adjusted for it

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index fb4baed97a01..e5a7bdead275 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -379,7 +379,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 0 120>;
+			gpio-ranges = <&pinctrl_periphs 0 0 119>;
 		};
 
 		emmc_pins: emmc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index f3fca26c9658..084cef1842e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -268,7 +268,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 0 101>;
+			gpio-ranges = <&pinctrl_periphs 0 0 100>;
 		};
 
 		emmc_pins: emmc {
-- 
2.13.5

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web