Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1736822 > unrolled thread

[PATCH v3 5/6] serial: imx: update the stop rx,tx procedures

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 5/6] serial: imx: update the stop rx,tx procedures Martyn Welch <martyn.welch@collabora.co.uk> - 2017-09-21 18:20 +0200
    Re: [PATCH v3 5/6] serial: imx: update the stop rx,tx procedures Uwe Kleine-König          <u.kleine-koenig@pengutronix.de> - 2017-09-21 20:30 +0200

#1736822 — [PATCH v3 5/6] serial: imx: update the stop rx,tx procedures

From: Nandor Han <nandor.han@ge.com>

According to "Documentation/serial/driver" both procedures should stop
receiving or sending data. Based on this the procedures should stop the
activity regardless if DMA is enabled or not.

This commit updates both imx_stop_{rx|tx} procedures to stop the
activity and disable the interrupts related to that.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
 drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index ed02783..256b128 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -388,15 +388,14 @@ static void imx_stop_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
-	/*
-	 * We are maybe in the SMP context, so if the DMA TX thread is running
-	 * on other cpu, we have to wait for it to finish.
-	 */
-	if (sport->dma_is_enabled && sport->dma_is_txing)
-		return;
+	sport->tx_bytes = 0;
+
+	if (sport->dma_is_enabled)
+		imx_stop_tx_dma(sport);
 
 	temp = readl(port->membase + UCR1);
-	writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1);
+	temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN | UCR1_RTSDEN);
+	writel(temp, port->membase + UCR1);
 
 	/* in rs485 mode disable transmitter if shifter is empty */
 	if (port->rs485.flags & SER_RS485_ENABLED &&
@@ -423,21 +422,20 @@ static void imx_stop_rx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
-	if (sport->dma_is_enabled && sport->dma_is_rxing) {
-		if (sport->port.suspended) {
-			dmaengine_terminate_all(sport->dma_chan_rx);
-			sport->dma_is_rxing = 0;
-		} else {
-			return;
-		}
-	}
+	if (sport->dma_is_enabled)
+		imx_stop_rx_dma(sport);
+
+	temp = readl(sport->port.membase + UCR1);
+	temp &= ~UCR1_RRDYEN;
+	writel(temp, sport->port.membase + UCR1);
 
 	temp = readl(sport->port.membase + UCR2);
-	writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+	temp &= ~UCR2_ATEN;
+	writel(temp, sport->port.membase + UCR2);
 
-	/* disable the `Receiver Ready Interrrupt` */
-	temp = readl(sport->port.membase + UCR1);
-	writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
+	temp = readl(sport->port.membase + UCR3);
+	temp &= ~UCR3_AWAKEN;
+	writel(temp, sport->port.membase + UCR3);
 }
 
 /*
-- 
1.8.3.1

[toc] | [next] | [standalone]

#1736999

On Thu, Sep 21, 2017 at 05:18:16PM +0100, Martyn Welch wrote:
> From: Nandor Han <nandor.han@ge.com>
> 
> According to "Documentation/serial/driver" both procedures should stop
> receiving or sending data. Based on this the procedures should stop the
> activity regardless if DMA is enabled or not.
> 
> This commit updates both imx_stop_{rx|tx} procedures to stop the
> activity and disable the interrupts related to that.
> 
> Signed-off-by: Nandor Han <nandor.han@ge.com>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> ---
>  drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
>  1 file changed, 17 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index ed02783..256b128 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -388,15 +388,14 @@ static void imx_stop_tx(struct uart_port *port)
>  	struct imx_port *sport = (struct imx_port *)port;
>  	unsigned long temp;
>  
> -	/*
> -	 * We are maybe in the SMP context, so if the DMA TX thread is running
> -	 * on other cpu, we have to wait for it to finish.
> -	 */

did you understand this comment you're removing here? I admit I don't
but unless it is non-sensical you're doing something wrong.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web