Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1735803 > unrolled thread

4.13 breaks suspend to ram wakeup

Back to article view | Back to linux.kernel

Contents

  4.13 breaks suspend to ram wakeup Norbert Preining <norbert@preining.info> - 2017-09-20 16:50 +0200
    Re: 4.13 breaks suspend to ram wakeup Ming Lei <tom.leiming@gmail.com> - 2017-09-20 17:50 +0200
      Re: 4.13 breaks suspend to ram wakeup Norbert Preining <preining@logic.at> - 2017-09-20 19:00 +0200
        Re: 4.13 breaks suspend to ram wakeup Ming Lei <tom.leiming@gmail.com> - 2017-09-21 03:30 +0200
          Re: 4.13 breaks suspend to ram wakeup Norbert Preining <preining@logic.at> - 2017-09-21 04:00 +0200
    Re: 4.13 breaks suspend to ram wakeup Marc Burkhardt <marc@osknowledge.org> - 2017-09-20 17:50 +0200

#1735803 — 4.13 breaks suspend to ram wakeup

Hi,

(please Cc)

I recently upgraded my Lenovo X260 from 4.12 to 4.13 and with the very
same software (Debian/sid) 4.13 does not properly wake up from 
suspend to ram.

It wakes up, shows X very quickly, but it seems that the hard disk is 
sleeping and not reacting. I can move the mouse, but the unlock screen 
is not shown.

Switching to the console I can enter the user name, but then I am waiting
for the prompt indefinitely.

Callng Sysrq-s to sync the disks never returns that the sync completed.

Waiting long enough it completely freezes and only Sysrq-b helps.

I have tried to capture any output, but due to the circumstances 
described, nothing can be saved to persist.

I am happy to provide details if someone explains me how to grab them
(sorry, no serial console!), or test patches/suggestions with the kernel.

Thanks

Norbert

please Cc.

--
PREINING Norbert                               http://www.preining.info
Accelia Inc.     +    JAIST     +    TeX Live     +    Debian Developer
GPG: 0x860CDC13   fp: F7D8 A928 26E3 16A1 9FA0 ACF0 6CAC A448 860C DC13

[toc] | [next] | [standalone]

#1735857

On Wed, Sep 20, 2017 at 10:36 PM, Norbert Preining
<norbert@preining.info> wrote:
> Hi,
>
> (please Cc)
>
> I recently upgraded my Lenovo X260 from 4.12 to 4.13 and with the very
> same software (Debian/sid) 4.13 does not properly wake up from
> suspend to ram.
>
> It wakes up, shows X very quickly, but it seems that the hard disk is
> sleeping and not reacting. I can move the mouse, but the unlock screen
> is not shown.
>
> Switching to the console I can enter the user name, but then I am waiting
> for the prompt indefinitely.
>
> Callng Sysrq-s to sync the disks never returns that the sync completed.

Looks your issue is very similar with Oleksandr's report:

        https://marc.info/?t=150340250100013&r=3&w=2

And Oleksandr tested the following patchset can fix his issue:

       https://marc.info/?l=linux-block&m=150579298505484&w=2

Maybe you can try it to see if it fixes your issue.


-- 
Ming Lei

[toc] | [prev] | [next] | [standalone]

#1735913

Dear all,

thanks for the quick feedback.

On Wed, 20 Sep 2017, Ming Lei wrote:
> Looks your issue is very similar with Oleksandr's report:

Indeed, I am using dm-crypt (full disk encryption) and
	CONFIG_DEFAULT_IOSCHED="cfq"
Any suggestion what should be selected instead?

> And Oleksandr tested the following patchset can fix his issue:
>        https://marc.info/?l=linux-block&m=150579298505484&w=2

Do you have a patch against 4.13? I tried applying the following
patches from git format-patch ebb2c2437d8008d467969
	0001-blk-mq-only-run-hw-queues-for-blk-mq.patch
	0002-block-tracking-request-allocation-with-q_usage_count.patch
	0003-blk-mq-rename-blk_mq_-freeze-unfreeze-_queue.patch
	0004-blk-mq-rename-blk_mq_freeze_queue_wait-as-blk_freeze.patch
	0005-block-rename-.mq_freeze_wq-and-.mq_freeze_depth.patch
	0006-block-pass-flags-to-blk_queue_enter.patch
	0007-block-introduce-preempt-version-of-blk_-freeze-unfre.patch
	0008-block-allow-to-allocate-req-with-RQF_PREEMPT-when-qu.patch
	0009-SCSI-transport_spi-resume-a-quiesced-device.patch
	0010-SCSI-preempt-freeze-block-queue-when-SCSI-device-is-.patch
to current 4.13, but without success.
(I don't want to play with .14-pre kernels by now.)

Thanks a lot and all the best

Norbert

--
PREINING Norbert                               http://www.preining.info
Accelia Inc.     +    JAIST     +    TeX Live     +    Debian Developer
GPG: 0x860CDC13   fp: F7D8 A928 26E3 16A1 9FA0 ACF0 6CAC A448 860C DC13

[toc] | [prev] | [next] | [standalone]

#1736313

On Thu, Sep 21, 2017 at 12:48 AM, Norbert Preining <preining@logic.at> wrote:
> Dear all,
>
> thanks for the quick feedback.
>
> On Wed, 20 Sep 2017, Ming Lei wrote:
>> Looks your issue is very similar with Oleksandr's report:
>
> Indeed, I am using dm-crypt (full disk encryption) and
>         CONFIG_DEFAULT_IOSCHED="cfq"
> Any suggestion what should be selected instead?

The previous reports are all with blk-mq enabled, since it is quite easy to
reproduce on blk-mq, but in theory there should be such issue on
block legacy when the request pool is used up, that means it can be
a bit hard to trigger in this case.

So could you share us how often it is triggered? and what is your underlying
disk behind dm-crypt?

BTW, you can debug and collect some dmesg log during system suspend/resume
without serial console:

1) pass 'no_console_suspend' to kernel cmdline

2) start a vga console via 'ctrl + alt + F1/F2/...'

3) run the following commands to start system suspend test:

echo 9 > /proc/sys/kernel/printk
echo devices > /sys/power/pm_test
echo mem > /sys/power/state

4) system will be waken up after 5 seconds

5) if the current console is hang after system resume, either you
wait for the hang log is triggered in console after 2 minutes, or you
can try to login from another vga console via 'ctrl + alt + F2/F3/...' and
try to collect dmesg log to see if there is hang

>
>> And Oleksandr tested the following patchset can fix his issue:
>>        https://marc.info/?l=linux-block&m=150579298505484&w=2
>
> Do you have a patch against 4.13? I tried applying the following
> patches from git format-patch ebb2c2437d8008d467969
>         0001-blk-mq-only-run-hw-queues-for-blk-mq.patch
>         0002-block-tracking-request-allocation-with-q_usage_count.patch
>         0003-blk-mq-rename-blk_mq_-freeze-unfreeze-_queue.patch
>         0004-blk-mq-rename-blk_mq_freeze_queue_wait-as-blk_freeze.patch
>         0005-block-rename-.mq_freeze_wq-and-.mq_freeze_depth.patch
>         0006-block-pass-flags-to-blk_queue_enter.patch
>         0007-block-introduce-preempt-version-of-blk_-freeze-unfre.patch
>         0008-block-allow-to-allocate-req-with-RQF_PREEMPT-when-qu.patch
>         0009-SCSI-transport_spi-resume-a-quiesced-device.patch
>         0010-SCSI-preempt-freeze-block-queue-when-SCSI-device-is-.patch
> to current 4.13, but without success.
> (I don't want to play with .14-pre kernels by now.)
>

Please get the patches backported to v4.13 in the following tree:

          https://github.com/ming1/linux/tree/my_v4.13-safe-scsi-quiesce_V5_for_test


-- 
Ming Lei

[toc] | [prev] | [next] | [standalone]

#1736329

Hi Ming,

> So could you share us how often it is triggered? and what is your underlying
> disk behind dm-crypt?

It is triggered *every* time I suspend.
Underlying disk is 
scsi 1:0:0:0: Direct-Access     ATA      WDC WD10JPVX-08J 1A07 PQ: 0 ANSI: 5

I checked the values in 
	/sys/block/dm-?/dm/use_blk_mq
and they are all set to 0.

> BTW, you can debug and collect some dmesg log during system suspend/resume
> without serial console:

I will try that tonight, now I am at work.

> Please get the patches backported to v4.13 in the following tree:

Thanks

Norbert

--
PREINING Norbert                               http://www.preining.info
Accelia Inc.     +    JAIST     +    TeX Live     +    Debian Developer
GPG: 0x860CDC13   fp: F7D8 A928 26E3 16A1 9FA0 ACF0 6CAC A448 860C DC13

[toc] | [prev] | [next] | [standalone]

#1735862

Hi Norbert,

from what I can tell 4.13 is really, really stable at resuming from suspend. I would say the most reliable kernel for a long time on my ThinkPad (P50, using nouveau).

Do you use blk-mq? There's a discussion regarding stalled io...

Regards,
Marc
P.S: sent from mobile, might be short.

Am 20. September 2017 16:36:56 MESZ schrieb Norbert Preining <norbert@preining.info>:
>Hi,
>
>(please Cc)
>
>I recently upgraded my Lenovo X260 from 4.12 to 4.13 and with the very
>same software (Debian/sid) 4.13 does not properly wake up from 
>suspend to ram.
>
>It wakes up, shows X very quickly, but it seems that the hard disk is 
>sleeping and not reacting. I can move the mouse, but the unlock screen 
>is not shown.
>
>Switching to the console I can enter the user name, but then I am
>waiting
>for the prompt indefinitely.
>
>Callng Sysrq-s to sync the disks never returns that the sync completed.
>
>Waiting long enough it completely freezes and only Sysrq-b helps.
>
>I have tried to capture any output, but due to the circumstances 
>described, nothing can be saved to persist.
>
>I am happy to provide details if someone explains me how to grab them
>(sorry, no serial console!), or test patches/suggestions with the
>kernel.
>
>Thanks
>
>Norbert
>
>please Cc.
>
>--
>PREINING Norbert                               http://www.preining.info
>Accelia Inc.     +    JAIST     +    TeX Live     +    Debian Developer
>GPG: 0x860CDC13   fp: F7D8 A928 26E3 16A1 9FA0 ACF0 6CAC A448 860C DC13

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web