Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1730586 > unrolled thread
| Started by | Stefan Brüns <stefan.bruens@rwth-aachen.de> |
|---|---|
| First post | 2017-09-12 01:50 +0200 |
| Last post | 2017-09-21 19:10 +0200 |
| Articles | 4 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH 0/2] dmaengine: Correct some documentation Stefan Brüns <stefan.bruens@rwth-aachen.de> - 2017-09-12 01:50 +0200
[PATCH 1/2] dmaengine: List all allowed values for src/dst_addr_width in kernel doc Stefan Brüns <stefan.bruens@rwth-aachen.de> - 2017-09-12 01:50 +0200
[PATCH 2/2] dmaengine: Mark struct dma_slave_caps kernel-doc correctly, clarify Stefan Brüns <stefan.bruens@rwth-aachen.de> - 2017-09-12 01:50 +0200
Re: [PATCH 0/2] dmaengine: Correct some documentation Vinod Koul <vinod.koul@intel.com> - 2017-09-21 19:10 +0200
| From | Stefan Brüns <stefan.bruens@rwth-aachen.de> |
|---|---|
| Date | 2017-09-12 01:50 +0200 |
| Subject | [PATCH 0/2] dmaengine: Correct some documentation |
| Message-ID | <uoGCL-1Nt-9@gated-at.bofh.it> |
Some small fixes for dmaengine documentation.
Stefan Brüns (2):
dmaengine: List all allowed values for src/dst_addr_width in kernel
doc
dmaengine: Mark struct dma_slave_caps kernel-doc correctly, clarify
include/linux/dmaengine.h | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
--
2.14.1
[toc] | [next] | [standalone]
| From | Stefan Brüns <stefan.bruens@rwth-aachen.de> |
|---|---|
| Date | 2017-09-12 01:50 +0200 |
| Subject | [PATCH 1/2] dmaengine: List all allowed values for src/dst_addr_width in kernel doc |
| Message-ID | <uoGCL-1Nt-13@gated-at.bofh.it> |
| In reply to | #1730586 |
Commit 93c6ee94c140 ("dma: Support for 3 bytes word size") and
commit 534a729866f9 ("dmaengine: Add 16 bytes, 32 bytes and 64 bytes
bus widths") added additional values for the allowed word size, but
omitted these from the struct dma_slave_config documentation.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
---
include/linux/dmaengine.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8319101170fc..2910e7dadc7f 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -329,7 +329,7 @@ enum dma_slave_buswidth {
* @src_addr_width: this is the width in bytes of the source (RX)
* register where DMA data shall be read. If the source
* is memory this may be ignored depending on architecture.
- * Legal values: 1, 2, 4, 8.
+ * Legal values: 1, 2, 3, 4, 8, 16, 32, 64.
* @dst_addr_width: same as src_addr_width but for destination
* target (TX) mutatis mutandis.
* @src_maxburst: the maximum number of words (note: words, as in
--
2.14.1
[toc] | [prev] | [next] | [standalone]
| From | Stefan Brüns <stefan.bruens@rwth-aachen.de> |
|---|---|
| Date | 2017-09-12 01:50 +0200 |
| Subject | [PATCH 2/2] dmaengine: Mark struct dma_slave_caps kernel-doc correctly, clarify |
| Message-ID | <uoGCL-1Nt-7@gated-at.bofh.it> |
| In reply to | #1730586 |
struct dma_slave_caps documentation omitted the correct kernel-doc
opening comment mark.
Document byte granularity and interpretation of the src/dst_addr_widths
bit flag fields used by struct dma_slave_caps and struct dma_device.
Add punctuation to their "directions" member documentations, and cleanup
wording of the description.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
---
include/linux/dmaengine.h | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 2910e7dadc7f..f838764993eb 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -404,14 +404,16 @@ enum dma_residue_granularity {
DMA_RESIDUE_GRANULARITY_BURST = 2,
};
-/* struct dma_slave_caps - expose capabilities of a slave channel only
- *
- * @src_addr_widths: bit mask of src addr widths the channel supports
- * @dst_addr_widths: bit mask of dstn addr widths the channel supports
- * @directions: bit mask of slave direction the channel supported
- * since the enum dma_transfer_direction is not defined as bits for each
- * type of direction, the dma controller should fill (1 << <TYPE>) and same
- * should be checked by controller as well
+/**
+ * struct dma_slave_caps - expose capabilities of a slave channel only
+ * @src_addr_widths: bit mask of src addr widths the channel supports.
+ * Width is specified in bytes, e.g. for a channel supporting
+ * a width of 4 the mask should have BIT(4) set.
+ * @dst_addr_widths: bit mask of dst addr widths the channel supports
+ * @directions: bit mask of slave directions the channel supports.
+ * Since the enum dma_transfer_direction is not defined as bit flag for
+ * each type, the dma controller should set BIT(<TYPE>) and same
+ * should be checked by controller as well
* @max_burst: max burst capability per-transfer
* @cmd_pause: true, if pause and thereby resume is supported
* @cmd_terminate: true, if terminate cmd is supported
@@ -678,11 +680,13 @@ struct dma_filter {
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @src_addr_widths: bit mask of src addr widths the device supports
+ * Width is specified in bytes, e.g. for a device supporting
+ * a width of 4 the mask should have BIT(4) set.
* @dst_addr_widths: bit mask of dst addr widths the device supports
- * @directions: bit mask of slave direction the device supports since
- * the enum dma_transfer_direction is not defined as bits for
- * each type of direction, the dma controller should fill (1 <<
- * <TYPE>) and same should be checked by controller as well
+ * @directions: bit mask of slave directions the device supports.
+ * Since the enum dma_transfer_direction is not defined as bit flag for
+ * each type, the dma controller should set BIT(<TYPE>) and same
+ * should be checked by controller as well
* @max_burst: max burst capability per-transfer
* @residue_granularity: granularity of the transfer residue reported
* by tx_status
--
2.14.1
[toc] | [prev] | [next] | [standalone]
| From | Vinod Koul <vinod.koul@intel.com> |
|---|---|
| Date | 2017-09-21 19:10 +0200 |
| Message-ID | <usd99-3OI-37@gated-at.bofh.it> |
| In reply to | #1730586 |
On Tue, Sep 12, 2017 at 01:44:43AM +0200, Stefan Brüns wrote: > Some small fixes for dmaengine documentation. Applied, thanks > > Stefan Brüns (2): > dmaengine: List all allowed values for src/dst_addr_width in kernel > doc > dmaengine: Mark struct dma_slave_caps kernel-doc correctly, clarify > > include/linux/dmaengine.h | 30 +++++++++++++++++------------- > 1 file changed, 17 insertions(+), 13 deletions(-) > > -- > 2.14.1 > -- ~Vinod
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web