Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1728521 > unrolled thread

RE: [PATCH v5 0/3] TPS68470 PMIC drivers

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  RE: [PATCH v5 0/3] TPS68470 PMIC drivers "Mani, Rajmohan" <rajmohan.mani@intel.com> - 2017-09-08 02:50 +0200

#1728521 — RE: [PATCH v5 0/3] TPS68470 PMIC drivers

Hi Rafael,

> Subject: RE: [PATCH v5 0/3] TPS68470 PMIC drivers
> 
> Hi Rafael,
> 
> > >> > >> > This is the patch series for TPS68470 PMIC that works as a
> > >> > >> > camera
> > PMIC.
> > >> > >> >
> > >> > >> > The patch series provide the following 3 drivers, to help
> > >> > >> > configure the
> > >> voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC,
> > >> to be able to use the camera sensors connected to this PMIC.
> > >> > >> >
> > >> > >> > TPS68470 MFD driver:
> > >> > >> > This is the multi function driver that initializes the
> > >> > >> > TPS68470 PMIC and
> > >> supports the GPIO and Op Region functions.
> > >> > >> >
> > >> > >> > TPS68470 GPIO driver:
> > >> > >> > This is the PMIC GPIO driver that will be used by the OS
> > >> > >> > GPIO layer,
> > >> when the BIOS / firmware triggered GPIO access is done.
> > >> > >> >
> > >> > >> > TPS68470 Op Region driver:
> > >> > >> > This is the driver that will be invoked, when the BIOS /
> > >> > >> > firmware
> > >> configures the voltage / clock for the sensors / vcm devices
> > >> connected to the PMIC.
> > >> > >> >
> > >> > >>
> > >> > >> All three patches are good to me (we did few rounds of
> > >> > >> internal review before posting v4)
> > >> > >>
> > >> > >> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> > >> > >
> > >> > > OK, so how should they be routed?
> > >> >
> > >> > Good question. I don't know how last time PMIC drivers were
> > >> > merged, here I think is just sane to route vi MFD with immutable
> > >> > branch created.
> > >>
> > >> OK
> > >>
> > >> I will assume that the series will go in through MFD then.
> > >>
> > >
> > > Now that the MFD and GPIO patches of v6 of this series have been
> > > applied
> > on respective trees, can you advise the next steps for the ACPI / PMIC
> > Opregion driver?
> >
> > Well, it would have been better to route the whole series through one tree.
> > Now it's better to wait until the two other trees get merged and then
> > apply the opregion patch.
> >
> 
> Ack.
> Let me get back once the other 2 trees are merged.
> 

Both MFD and GPIO patches of this series got merged upstream as of today.

Thanks
Raj

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web