Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1729707 > unrolled thread
| Started by | Ben Hutchings <ben@decadent.org.uk> |
|---|---|
| First post | 2017-09-10 01:10 +0200 |
| Last post | 2017-09-10 01:10 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 3.16 059/233] usb: musb: tusb6010_omap: Do not reset the other direction's packet size Ben Hutchings <ben@decadent.org.uk> - 2017-09-10 01:10 +0200
| From | Ben Hutchings <ben@decadent.org.uk> |
|---|---|
| Date | 2017-09-10 01:10 +0200 |
| Subject | [PATCH 3.16 059/233] usb: musb: tusb6010_omap: Do not reset the other direction's packet size |
| Message-ID | <unX2W-3Jz-17@gated-at.bofh.it> |
3.16.48-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.
We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.
To fix this issue, only modify the TX or RX part of the register.
Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/musb/tusb6010_omap.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -220,6 +220,7 @@ static int tusb_omap_dma_program(struct
u32 dma_remaining;
int src_burst, dst_burst;
u16 csr;
+ u32 psize;
int ch;
s8 dmareq;
s8 sync_dev;
@@ -391,15 +392,19 @@ static int tusb_omap_dma_program(struct
if (chdat->tx) {
/* Send transfer_packet_sz packets at a time */
- musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
- chdat->transfer_packet_sz);
+ psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+ psize &= ~0x7ff;
+ psize |= chdat->transfer_packet_sz;
+ musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
} else {
/* Receive transfer_packet_sz packets at a time */
- musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
- chdat->transfer_packet_sz << 16);
+ psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+ psize &= ~(0x7ff << 16);
+ psize |= (chdat->transfer_packet_sz << 16);
+ musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
Back to top | Article view | linux.kernel
csiph-web