Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1726138 > unrolled thread

Re: [PATCH] arm: boot: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] arm: boot: dts: artpec6: Remove unnecessary  interrupt-parent property from sub-nodes Niklas Cassel <niklas.cassel@axis.com> - 2017-09-04 17:30 +0200
    [PATCH v2] arm: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes surenderp@techveda.org - 2017-09-06 07:10 +0200

#1726138 — Re: [PATCH] arm: boot: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes

On 08/11/2017 09:56 AM, Surender Polsani wrote:
> On Tuesday 27 June 2017 05:57 PM, Niklas Cassel wrote:
>> Acked-by: Niklas Cassel <niklas.cassel@axis.com>
> 
> Hi Nik, This patch has been Acknowledged but is not getting added / applied to the
> respective git source tree. Please let me know if there is any problem.

Hello Surender,

Sorry for the delay.

Could you please resend your patch,
add "To: arm@kernel.org", together with my Ack.

Best regards,
Niklas

> 
> Thanks
> Surender
>>
>> On 06/27/2017 02:15 PM, surenderp@techveda.org wrote:
>>> From: Surender Polsani <surenderp@techveda.org>
>>>
>>> "interrupt-parent" property is declared in root node, so it is global
>>> to all nodes. This property is re-declared in few sub-nodes. To avoid
>>> duplication this property is removed from following sub-nodes:
>>> pmu, amba@0, amba@0/ethernet.
>>>
>>> Signed-off-by: Surender Polsani <surenderp@techveda.org>
>>> ---
>>>   arch/arm/boot/dts/artpec6.dtsi | 3 ---
>>>   1 file changed, 3 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
>>> index 767cbe8..2ed1177 100644
>>> --- a/arch/arm/boot/dts/artpec6.dtsi
>>> +++ b/arch/arm/boot/dts/artpec6.dtsi
>>> @@ -151,7 +151,6 @@
>>>           interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>>>               <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>>>           interrupt-affinity = <&cpu0>, <&cpu1>;
>>> -        interrupt-parent = <&intc>;
>>>       };
>>>         pcie: pcie@f8050000 {
>>> @@ -185,7 +184,6 @@
>>>           compatible = "simple-bus";
>>>           #address-cells = <0x1>;
>>>           #size-cells = <0x1>;
>>> -        interrupt-parent = <&intc>;
>>>           ranges;
>>>           dma-ranges = <0x80000000 0x00000000 0x40000000>;
>>>           dma-coherent;
>>> @@ -195,7 +193,6 @@
>>>               clocks = <&eth_phy_ref_clk>,
>>>                   <&clkctrl ARTPEC6_CLK_ETH_ACLK>;
>>>               compatible = "snps,dwc-qos-ethernet-4.10";
>>> -            interrupt-parent = <&intc>;
>>>               interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>>>               reg = <0xf8010000 0x4000>;
>>>  
> 

[toc] | [next] | [standalone]

#1727154 — [PATCH v2] arm: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes

From: Surender Polsani <surenderp@techveda.org>

"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes: pmu,
amba@0, amba@0/ethernet.

Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
---
Changes for v2:

- Done few changes as suggested by Niklas Cassel.
- Patch is rebased and built(ARCH=arm) on latest next-20170905.
---
 arch/arm/boot/dts/artpec6.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 767cbe8..2ed1177 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -151,7 +151,6 @@
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
-		interrupt-parent = <&intc>;
 	};
 
 	pcie: pcie@f8050000 {
@@ -185,7 +184,6 @@
 		compatible = "simple-bus";
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
-		interrupt-parent = <&intc>;
 		ranges;
 		dma-ranges = <0x80000000 0x00000000 0x40000000>;
 		dma-coherent;
@@ -195,7 +193,6 @@
 			clocks = <&eth_phy_ref_clk>,
 				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
-			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xf8010000 0x4000>;
 
-- 
1.9.1

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web