Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1722299 > unrolled thread

Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS

Started byMark yao <mark.yao@rock-chips.com>
First post2017-08-29 12:20 +0200
Last post2017-09-01 08:50 +0200
Articles 3 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip  Soc LVDS Mark yao <mark.yao@rock-chips.com> - 2017-08-29 12:20 +0200
    Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS Heiko Stuebner <heiko@sntech.de> - 2017-08-29 12:40 +0200
      Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip  Soc LVDS Sandy Huang <hjc@rock-chips.com> - 2017-09-01 08:50 +0200

#1722299 — Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS

FromMark yao <mark.yao@rock-chips.com>
Date2017-08-29 12:20 +0200
SubjectRe: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS
Message-ID<ujLMJ-1lA-3@gated-at.bofh.it>
On 2017年08月23日 14:26, Sandy Huang wrote:
> This patch add Document for Rockchip Soc RK3288 LVDS,
> This based on the patches from Mark yao and Heiko Stuebner.
>
> Signed-off-by: Sandy Huang <hjc@rock-chips.com>
> Signed-off-by: Mark yao <mark.yao@rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
Looks good for me:

Reviewed-by: Mark Yao <mark.yao@rock-chips.com>

> Changes according to Rob Herring's review.
>
>   .../bindings/display/rockchip/rockchip-lvds.txt    | 99 ++++++++++++++++++++++
>   1 file changed, 99 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> new file mode 100644
> index 0000000..da6939e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> @@ -0,0 +1,99 @@
> +Rockchip RK3288 LVDS interface
> +================================
> +
> +Required properties:
> +- compatible: matching the soc type, one of
> +	- "rockchip,rk3288-lvds";
> +
> +- reg: physical base address of the controller and length
> +	of memory mapped region.
> +- clocks: must include clock specifiers corresponding to entries in the
> +	clock-names property.
> +- clock-names: must contain "pclk_lvds"
> +
> +- avdd1v0-supply: regulator phandle for 1.0V analog power
> +- avdd1v8-supply: regulator phandle for 1.8V analog power
> +- avdd3v3-supply: regulator phandle for 3.3V analog power
> +
> +- rockchip,grf: phandle to the general register files syscon
> +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
> +
> +Optional properties:
> +- pinctrl-names: must contain a "lcdc" entry.
> +- pinctrl-0: pin control group to be used for this controller.
> +
> +Required nodes:
> +
> +The lvds has two video ports as described by
> +	Documentation/devicetree/bindings/media/video-interfaces.txt
> +Their connections are modeled using the OF graph bindings specified in
> +	Documentation/devicetree/bindings/graph.txt.
> +
> +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
> +- video port 1 for either a panel or subsequent encoder
> +
> +the lvds panel described by
> +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
> +
> +Panel required properties:
> +- ports for remote LVDS output
> +
> +Panel optional properties:
> +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
> +This describes decribed by:
> +	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> +
> +Example:
> +
> +lvds_panel: lvds-panel {
> +	compatible = "auo,b101ean01";
> +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> +	data-mapping = "jeida-24";
> +
> +	ports {
> +		panel_in_lvds: endpoint {
> +			remote-endpoint = <&lvds_out_panel>;
> +		};
> +	};
> +};
> +
> +For Rockchip RK3288:
> +
> +	lvds: lvds@ff96c000 {
> +		compatible = "rockchip,rk3288-lvds";
> +		rockchip,grf = <&grf>;
> +		reg = <0xff96c000 0x4000>;
> +		clocks = <&cru PCLK_LVDS_PHY>;
> +		clock-names = "pclk_lvds";
> +		pinctrl-names = "lcdc";
> +		pinctrl-0 = <&lcdc_ctl>;
> +		avdd1v0-supply = <&vdd10_lcd>;
> +		avdd1v8-supply = <&vcc18_lcd>;
> +		avdd3v3-supply = <&vcca_33>;
> +		rockchip,output = "rgb";
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			lvds_in: port@0 {
> +				reg = <0>;
> +
> +				lvds_in_vopb: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_lvds>;
> +				};
> +				lvds_in_vopl: endpoint@1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_lvds>;
> +				};
> +			};
> +
> +			lvds_out: port@1 {
> +				reg = <1>;
> +
> +				lvds_out_panel: endpoint {
> +					remote-endpoint = <&panel_in_lvds>;
> +				};
> +			};
> +		};
> +	};


-- 
Ｍark Yao

[toc] | [next] | [standalone]

#1722314 — Re: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS

FromHeiko Stuebner <heiko@sntech.de>
Date2017-08-29 12:40 +0200
SubjectRe: [PATCH v7 1/3] dt-bindings: display: Add Document for Rockchip Soc LVDS
Message-ID<ujM66-1t9-3@gated-at.bofh.it>
In reply to#1722299
Am Dienstag, 29. August 2017, 18:17:11 CEST schrieb Mark yao:
> On 2017年08月23日 14:26, Sandy Huang wrote:
> > This patch add Document for Rockchip Soc RK3288 LVDS,
> > This based on the patches from Mark yao and Heiko Stuebner.
> >
> > Signed-off-by: Sandy Huang <hjc@rock-chips.com>
> > Signed-off-by: Mark yao <mark.yao@rock-chips.com>
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > ---
> Looks good for me:
> 
> Reviewed-by: Mark Yao <mark.yao@rock-chips.com>

Signed-off ordering is wrong though ... you add a Signed-off below
all others and you could also drop the one from me, as I don't
think I did provide to much value between Mark's and Sandy's variant
of the patches :-)


Heiko


> > Changes according to Rob Herring's review.
> >
> >   .../bindings/display/rockchip/rockchip-lvds.txt    | 99 ++++++++++++++++++++++
> >   1 file changed, 99 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> > new file mode 100644
> > index 0000000..da6939e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> > @@ -0,0 +1,99 @@
> > +Rockchip RK3288 LVDS interface
> > +================================
> > +
> > +Required properties:
> > +- compatible: matching the soc type, one of
> > +	- "rockchip,rk3288-lvds";
> > +
> > +- reg: physical base address of the controller and length
> > +	of memory mapped region.
> > +- clocks: must include clock specifiers corresponding to entries in the
> > +	clock-names property.
> > +- clock-names: must contain "pclk_lvds"
> > +
> > +- avdd1v0-supply: regulator phandle for 1.0V analog power
> > +- avdd1v8-supply: regulator phandle for 1.8V analog power
> > +- avdd3v3-supply: regulator phandle for 3.3V analog power
> > +
> > +- rockchip,grf: phandle to the general register files syscon
> > +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
> > +
> > +Optional properties:
> > +- pinctrl-names: must contain a "lcdc" entry.
> > +- pinctrl-0: pin control group to be used for this controller.
> > +
> > +Required nodes:
> > +
> > +The lvds has two video ports as described by
> > +	Documentation/devicetree/bindings/media/video-interfaces.txt
> > +Their connections are modeled using the OF graph bindings specified in
> > +	Documentation/devicetree/bindings/graph.txt.
> > +
> > +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
> > +- video port 1 for either a panel or subsequent encoder
> > +
> > +the lvds panel described by
> > +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
> > +
> > +Panel required properties:
> > +- ports for remote LVDS output
> > +
> > +Panel optional properties:
> > +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
> > +This describes decribed by:
> > +	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> > +
> > +Example:
> > +
> > +lvds_panel: lvds-panel {
> > +	compatible = "auo,b101ean01";
> > +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> > +	data-mapping = "jeida-24";
> > +
> > +	ports {
> > +		panel_in_lvds: endpoint {
> > +			remote-endpoint = <&lvds_out_panel>;
> > +		};
> > +	};
> > +};
> > +
> > +For Rockchip RK3288:
> > +
> > +	lvds: lvds@ff96c000 {
> > +		compatible = "rockchip,rk3288-lvds";
> > +		rockchip,grf = <&grf>;
> > +		reg = <0xff96c000 0x4000>;
> > +		clocks = <&cru PCLK_LVDS_PHY>;
> > +		clock-names = "pclk_lvds";
> > +		pinctrl-names = "lcdc";
> > +		pinctrl-0 = <&lcdc_ctl>;
> > +		avdd1v0-supply = <&vdd10_lcd>;
> > +		avdd1v8-supply = <&vcc18_lcd>;
> > +		avdd3v3-supply = <&vcca_33>;
> > +		rockchip,output = "rgb";
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			lvds_in: port@0 {
> > +				reg = <0>;
> > +
> > +				lvds_in_vopb: endpoint@0 {
> > +					reg = <0>;
> > +					remote-endpoint = <&vopb_out_lvds>;
> > +				};
> > +				lvds_in_vopl: endpoint@1 {
> > +					reg = <1>;
> > +					remote-endpoint = <&vopl_out_lvds>;
> > +				};
> > +			};
> > +
> > +			lvds_out: port@1 {
> > +				reg = <1>;
> > +
> > +				lvds_out_panel: endpoint {
> > +					remote-endpoint = <&panel_in_lvds>;
> > +				};
> > +			};
> > +		};
> > +	};
> 
> 
>

[toc] | [prev] | [next] | [standalone]

#1724807

FromSandy Huang <hjc@rock-chips.com>
Date2017-09-01 08:50 +0200
Message-ID<ukNWa-9F-9@gated-at.bofh.it>
In reply to#1722314
Hi heiko,

在 2017/8/29 18:29, Heiko Stuebner 写道:
> Am Dienstag, 29. August 2017, 18:17:11 CEST schrieb Mark yao:
>> On 2017年08月23日 14:26, Sandy Huang wrote:
>>> This patch add Document for Rockchip Soc RK3288 LVDS,
>>> This based on the patches from Mark yao and Heiko Stuebner.
>>>
>>> Signed-off-by: Sandy Huang <hjc@rock-chips.com>
>>> Signed-off-by: Mark yao <mark.yao@rock-chips.com>
>>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>>> ---
>> Looks good for me:
>>
>> Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
> 
> Signed-off ordering is wrong though ... you add a Signed-off below
> all others and you could also drop the one from me, as I don't
> think I did provide to much value between Mark's and Sandy's variant
> of the patches :-)
> 
> 
> Heiko
> 
> 
I will change the Singed off order as bellow at next version.

Signed-off-by: Mark yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>

>>> Changes according to Rob Herring's review.
>>>
>>>    .../bindings/display/rockchip/rockchip-lvds.txt    | 99 ++++++++++++++++++++++
>>>    1 file changed, 99 insertions(+)
>>>    create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>>> new file mode 100644
>>> index 0000000..da6939e
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>>> @@ -0,0 +1,99 @@
>>> +Rockchip RK3288 LVDS interface
>>> +================================
>>> +
>>> +Required properties:
>>> +- compatible: matching the soc type, one of
>>> +	- "rockchip,rk3288-lvds";
>>> +
>>> +- reg: physical base address of the controller and length
>>> +	of memory mapped region.
>>> +- clocks: must include clock specifiers corresponding to entries in the
>>> +	clock-names property.
>>> +- clock-names: must contain "pclk_lvds"
>>> +
>>> +- avdd1v0-supply: regulator phandle for 1.0V analog power
>>> +- avdd1v8-supply: regulator phandle for 1.8V analog power
>>> +- avdd3v3-supply: regulator phandle for 3.3V analog power
>>> +
>>> +- rockchip,grf: phandle to the general register files syscon
>>> +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
>>> +
>>> +Optional properties:
>>> +- pinctrl-names: must contain a "lcdc" entry.
>>> +- pinctrl-0: pin control group to be used for this controller.
>>> +
>>> +Required nodes:
>>> +
>>> +The lvds has two video ports as described by
>>> +	Documentation/devicetree/bindings/media/video-interfaces.txt
>>> +Their connections are modeled using the OF graph bindings specified in
>>> +	Documentation/devicetree/bindings/graph.txt.
>>> +
>>> +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
>>> +- video port 1 for either a panel or subsequent encoder
>>> +
>>> +the lvds panel described by
>>> +	Documentation/devicetree/bindings/display/panel/simple-panel.txt
>>> +
>>> +Panel required properties:
>>> +- ports for remote LVDS output
>>> +
>>> +Panel optional properties:
>>> +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
>>> +This describes decribed by:
>>> +	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
>>> +
>>> +Example:
>>> +
>>> +lvds_panel: lvds-panel {
>>> +	compatible = "auo,b101ean01";
>>> +	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
>>> +	data-mapping = "jeida-24";
>>> +
>>> +	ports {
>>> +		panel_in_lvds: endpoint {
>>> +			remote-endpoint = <&lvds_out_panel>;
>>> +		};
>>> +	};
>>> +};
>>> +
>>> +For Rockchip RK3288:
>>> +
>>> +	lvds: lvds@ff96c000 {
>>> +		compatible = "rockchip,rk3288-lvds";
>>> +		rockchip,grf = <&grf>;
>>> +		reg = <0xff96c000 0x4000>;
>>> +		clocks = <&cru PCLK_LVDS_PHY>;
>>> +		clock-names = "pclk_lvds";
>>> +		pinctrl-names = "lcdc";
>>> +		pinctrl-0 = <&lcdc_ctl>;
>>> +		avdd1v0-supply = <&vdd10_lcd>;
>>> +		avdd1v8-supply = <&vcc18_lcd>;
>>> +		avdd3v3-supply = <&vcca_33>;
>>> +		rockchip,output = "rgb";
>>> +		ports {
>>> +			#address-cells = <1>;
>>> +			#size-cells = <0>;
>>> +
>>> +			lvds_in: port@0 {
>>> +				reg = <0>;
>>> +
>>> +				lvds_in_vopb: endpoint@0 {
>>> +					reg = <0>;
>>> +					remote-endpoint = <&vopb_out_lvds>;
>>> +				};
>>> +				lvds_in_vopl: endpoint@1 {
>>> +					reg = <1>;
>>> +					remote-endpoint = <&vopl_out_lvds>;
>>> +				};
>>> +			};
>>> +
>>> +			lvds_out: port@1 {
>>> +				reg = <1>;
>>> +
>>> +				lvds_out_panel: endpoint {
>>> +					remote-endpoint = <&panel_in_lvds>;
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>
>>
>>
> 
> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web