Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1722120 > unrolled thread
| Started by | Hoegeun Kwon <hoegeun.kwon@samsung.com> |
|---|---|
| First post | 2017-08-29 05:00 +0200 |
| Last post | 2017-08-29 08:00 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-08-29 05:00 +0200
Re: [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts Krzysztof Kozlowski <krzk@kernel.org> - 2017-08-29 08:00 +0200
| From | Hoegeun Kwon <hoegeun.kwon@samsung.com> |
|---|---|
| Date | 2017-08-29 05:00 +0200 |
| Subject | Re: [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts |
| Message-ID | <ujEUW-5kD-3@gated-at.bofh.it> |
Hi Krzysztof,
The driver has been merged into exynos-drm-misc.
Could you please check this patch(3/3).
Best regards,
Hoegeun
On 07/13/2017 11:20 AM, Hoegeun Kwon wrote:
> The display-timing and delay are included in the panel driver. So it
> should be removed in dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
> arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
> 1 file changed, 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> index 443e0c9..6b70c8d 100644
> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> @@ -242,28 +242,6 @@
> vci-supply = <&ldo20_reg>;
> reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
> te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
> - power-on-delay= <30>;
> - power-off-delay= <120>;
> - reset-delay = <5>;
> - init-delay = <100>;
> - flip-horizontal;
> - flip-vertical;
> - panel-width-mm = <29>;
> - panel-height-mm = <29>;
> -
> - display-timings {
> - timing-0 {
> - clock-frequency = <4600000>;
> - hactive = <320>;
> - vactive = <320>;
> - hfront-porch = <1>;
> - hback-porch = <1>;
> - hsync-len = <1>;
> - vfront-porch = <150>;
> - vback-porch = <1>;
> - vsync-len = <2>;
> - };
> - };
>
> port {
> dsi_in: endpoint {
[toc] | [next] | [standalone]
| From | Krzysztof Kozlowski <krzk@kernel.org> |
|---|---|
| Date | 2017-08-29 08:00 +0200 |
| Message-ID | <ujHJ7-75f-3@gated-at.bofh.it> |
| In reply to | #1722120 |
On Tue, Aug 29, 2017 at 4:52 AM, Hoegeun Kwon <hoegeun.kwon@samsung.com> wrote:
> Hi Krzysztof,
>
> The driver has been merged into exynos-drm-misc.
> Could you please check this patch(3/3).
Hi, OK, no problems for me but it is too late for current cycle so it
will go in for v4.15.
Best regards,
Krzysztof
>
> Best regards,
> Hoegeun
>
>
> On 07/13/2017 11:20 AM, Hoegeun Kwon wrote:
>>
>> The display-timing and delay are included in the panel driver. So it
>> should be removed in dts.
>>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
>> 1 file changed, 22 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts
>> b/arch/arm/boot/dts/exynos3250-rinato.dts
>> index 443e0c9..6b70c8d 100644
>> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
>> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
>> @@ -242,28 +242,6 @@
>> vci-supply = <&ldo20_reg>;
>> reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
>> te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
>> - power-on-delay= <30>;
>> - power-off-delay= <120>;
>> - reset-delay = <5>;
>> - init-delay = <100>;
>> - flip-horizontal;
>> - flip-vertical;
>> - panel-width-mm = <29>;
>> - panel-height-mm = <29>;
>> -
>> - display-timings {
>> - timing-0 {
>> - clock-frequency = <4600000>;
>> - hactive = <320>;
>> - vactive = <320>;
>> - hfront-porch = <1>;
>> - hback-porch = <1>;
>> - hsync-len = <1>;
>> - vfront-porch = <150>;
>> - vback-porch = <1>;
>> - vsync-len = <2>;
>> - };
>> - };
>> port {
>> dsi_in: endpoint {
>
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web