Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1719772 > unrolled thread

[PATCH 1/2] dt-bindings: leds: gpio: Add optional retain-state-shutdown property

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 1/2] dt-bindings: leds: gpio: Add optional retain-state-shutdown property Andrew Jeffery <andrew@aj.id.au> - 2017-08-25 08:40 +0200

#1719772 — [PATCH 1/2] dt-bindings: leds: gpio: Add optional retain-state-shutdown property

On BMC systems it's sometimes necessary for a LED to retain its state
across a BMC reset (which is independent of the host system state). Add
a devicetree property to describe this behaviour. The property would
typically be used in conjunction with 'default-state = "keep"'.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index 76535ca37120..a48dda268f81 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -18,6 +18,9 @@ LED sub-node properties:
   see Documentation/devicetree/bindings/leds/common.txt
 - retain-state-suspended: (optional) The suspend state can be retained.Such
   as charge-led gpio.
+- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
+  Useful in BMC systems, for example when the BMC is rebooted while the host
+  remains up.
 - panic-indicator : (optional)
   see Documentation/devicetree/bindings/leds/common.txt
 
-- 
2.11.0

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web