Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1720565 > unrolled thread

[PATCH v4 2/5] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac

Started byCorentin Labbe <clabbe.montjoie@gmail.com>
First post2017-08-26 09:40 +0200
Last post2017-08-26 09:40 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v4 2/5] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac Corentin Labbe <clabbe.montjoie@gmail.com> - 2017-08-26 09:40 +0200

#1720565 — [PATCH v4 2/5] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac

FromCorentin Labbe <clabbe.montjoie@gmail.com>
Date2017-08-26 09:40 +0200
Subject[PATCH v4 2/5] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
Message-ID<uiDRg-6Ku-9@gated-at.bofh.it>
Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4b599b5d26f6..5ffb940a44bb 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -417,7 +417,22 @@
 			#size-cells = <0>;
 			status = "disabled";
 
-			mdio: mdio {
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+		};
+
+		eth-phy-mux {
+			compatible = "mdio-mux";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio0>;
+
+			/* Only one MDIO is usable at the time */
+			internal_mdio: mdio@1 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				int_mii_phy: ethernet-phy@1 {
@@ -425,8 +440,13 @@
 					reg = <1>;
 					clocks = <&ccu CLK_BUS_EPHY>;
 					resets = <&ccu RST_BUS_EPHY>;
+					phy-is-integrated;
 				};
 			};
+			mdio: mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		spi0: spi@01c68000 {
-- 
2.13.5

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web