Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1716306 > unrolled thread
| Started by | Harvey Hunt <harvey.hunt@imgtec.com> |
|---|---|
| First post | 2017-08-21 13:00 +0200 |
| Last post | 2017-08-21 13:00 +0200 |
| Articles | 2 — 1 participant |
Back to article view | Back to linux.kernel
[V2 1/4] MIPS: dts: ralink: Add Mediatek MT7628A SoC Harvey Hunt <harvey.hunt@imgtec.com> - 2017-08-21 13:00 +0200
[V2 4/4] MIPS: configs: Add VoCore2 defconfig Harvey Hunt <harvey.hunt@imgtec.com> - 2017-08-21 13:00 +0200
| From | Harvey Hunt <harvey.hunt@imgtec.com> |
|---|---|
| Date | 2017-08-21 13:00 +0200 |
| Subject | [V2 1/4] MIPS: dts: ralink: Add Mediatek MT7628A SoC |
| Message-ID | <ugSB4-3kB-15@gated-at.bofh.it> |
The MT7628A is the successor to the MT7620 and pin compatible with the
MT7688A, although the latter supports only a 1T1R antenna rather than
a 2T2R antenna.
This commit adds support for the following features:
- UART
- USB PHY
- EHCI
- Interrupt controller
- System controller
- Memory controller
- Reset controller
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
---
Ralf: I've added this patch to both my vocore2 and omega2+
patchsets for ease of review, please only merge it once :-)
Changes in V2:
- Add MT7628 to patchset to keep kbuild happy and retain context
- Rename multiple DT nodes to standard names
- Add labels for uarts
- Rename USB PHY handle
Documentation/devicetree/bindings/mips/ralink.txt | 1 +
arch/mips/boot/dts/ralink/mt7628a.dtsi | 126 ++++++++++++++++++++++
2 files changed, 127 insertions(+)
create mode 100644 arch/mips/boot/dts/ralink/mt7628a.dtsi
diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
index b35a8d0..a16e8d7 100644
--- a/Documentation/devicetree/bindings/mips/ralink.txt
+++ b/Documentation/devicetree/bindings/mips/ralink.txt
@@ -15,3 +15,4 @@ value must be one of the following values:
ralink,rt5350-soc
ralink,mt7620a-soc
ralink,mt7620n-soc
+ ralink,mt7628a-soc
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
new file mode 100644
index 0000000..9ff7e8f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -0,0 +1,126 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mt7628a-soc";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mti,mips24KEc";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ resetc: reset-controller {
+ compatible = "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc: system-controller@0 {
+ compatible = "ralink,mt7620a-sysc", "syscon";
+ reg = <0x0 0x100>;
+ };
+
+ intc: interrupt-controller@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ resets = <&resetc 9>;
+ reset-names = "intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ ralink,intc-registers = <0x9c 0xa0
+ 0x6c 0xa4
+ 0x80 0x78>;
+ };
+
+ memory-controller@300 {
+ compatible = "ralink,mt7620a-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uart0: uartlite@c00 {
+ compatible = "ns16550a";
+ reg = <0xc00 0x100>;
+
+ resets = <&resetc 12>;
+ reset-names = "uart0";
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ reg-shift = <2>;
+ };
+
+ uart1: uart1@d00 {
+ compatible = "ns16550a";
+ reg = <0xd00 0x100>;
+
+ resets = <&resetc 19>;
+ reset-names = "uart1";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ reg-shift = <2>;
+ };
+
+ uart2: uart2@e00 {
+ compatible = "ns16550a";
+ reg = <0xe00 0x100>;
+
+ resets = <&resetc 20>;
+ reset-names = "uart2";
+
+ interrupt-parent = <&intc>;
+ interrupts = <22>;
+
+ reg-shift = <2>;
+ };
+ };
+
+ usb_phy: usb-phy@10120000 {
+ compatible = "mediatek,mt7628-usbphy";
+ reg = <0x10120000 0x1000>;
+
+ #phy-cells = <0>;
+
+ ralink,sysctl = <&sysc>;
+ resets = <&resetc 22 &resetc 25>;
+ reset-names = "host", "device";
+ };
+
+ ehci@101c0000 {
+ compatible = "generic-ehci";
+ reg = <0x101c0000 0x1000>;
+
+ phys = <&usb_phy>;
+ phy-names = "usb";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+};
--
2.7.4
[toc] | [next] | [standalone]
| From | Harvey Hunt <harvey.hunt@imgtec.com> |
|---|---|
| Date | 2017-08-21 13:00 +0200 |
| Subject | [V2 4/4] MIPS: configs: Add VoCore2 defconfig |
| Message-ID | <ugSB4-3kB-25@gated-at.bofh.it> |
| In reply to | #1716306 |
Enabled supported drivers, including:
- USB PHY
- EHCI
- UART
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
---
Changes in V2:
- Remove CONFIG_PANIC_ON_OOPS
arch/mips/configs/vocore2_defconfig | 129 ++++++++++++++++++++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/mips/configs/vocore2_defconfig
diff --git a/arch/mips/configs/vocore2_defconfig b/arch/mips/configs/vocore2_defconfig
new file mode 100644
index 0000000..9121e41
--- /dev/null
+++ b/arch/mips/configs/vocore2_defconfig
@@ -0,0 +1,129 @@
+CONFIG_RALINK=y
+CONFIG_SOC_MT7620=y
+CONFIG_DTB_VOCORE2=y
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_COMPACTION is not set
+CONFIG_HZ_100=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_MMC=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_MEMORY=y
+CONFIG_PHY_RALINK_USB=y
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRC16=y
+CONFIG_XZ_DEC=y
--
2.7.4
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web