Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1715998 > unrolled thread
| Started by | Long Li <longli@exchange.microsoft.com> |
|---|---|
| First post | 2017-08-20 21:10 +0200 |
| Last post | 2017-08-21 20:20 +0200 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[Patch v2 01/19] CIFS: Add RDMA mount option Long Li <longli@exchange.microsoft.com> - 2017-08-20 21:10 +0200
Re: [Patch v2 01/19] CIFS: Add RDMA mount option Leon Romanovsky <leon@kernel.org> - 2017-08-21 06:40 +0200
RE: [Patch v2 01/19] CIFS: Add RDMA mount option Long Li <longli@microsoft.com> - 2017-08-21 20:20 +0200
| From | Long Li <longli@exchange.microsoft.com> |
|---|---|
| Date | 2017-08-20 21:10 +0200 |
| Subject | [Patch v2 01/19] CIFS: Add RDMA mount option |
| Message-ID | <ugDLI-2xW-23@gated-at.bofh.it> |
From: Long Li <longli@microsoft.com>
Add "rdma" to CIFS mount option, which tells CIFS this is for connecting to a SMB server over SMBDirect. Add checks to validate this feature is only used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
Signed-off-by: Long Li <longli@microsoft.com>
---
fs/cifs/cifs_debug.c | 2 ++
fs/cifs/cifsfs.c | 2 ++
fs/cifs/cifsglob.h | 3 +++
fs/cifs/connect.c | 25 ++++++++++++++++++++++++-
4 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 9727e1d..ba0870d 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -171,6 +171,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
ses->ses_count, ses->serverOS, ses->serverNOS,
ses->capabilities, ses->status);
}
+ if (server->rdma)
+ seq_printf(m, "RDMA\n\t");
seq_printf(m, "TCP status: %d\n\tLocal Users To "
"Server: %d SecMode: 0x%x Req On Wire: %d",
server->tcpStatus, server->srv_count,
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index fe0c8dc..a628800 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -330,6 +330,8 @@ cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
default:
seq_puts(s, "(unknown)");
}
+ if (server->rdma)
+ seq_puts(s, ",rdma");
}
static void
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 8289f95..703c2fb 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -531,6 +531,7 @@ struct smb_vol {
bool nopersistent:1;
bool resilient:1; /* noresilient not required since not fored for CA */
bool domainauto:1;
+ bool rdma:1;
unsigned int rsize;
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
@@ -649,6 +650,8 @@ struct TCP_Server_Info {
bool sec_kerberos; /* supports plain Kerberos */
bool sec_mskerberos; /* supports legacy MS Kerberos */
bool large_buf; /* is current buffer large? */
+ /* use SMBD connection instead of socket */
+ bool rdma;
struct delayed_work echo; /* echo ping workqueue job */
char *smallbuf; /* pointer to current "small" buffer */
char *bigbuf; /* pointer to current "big" buffer */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2eeaac6..d5d0ecd 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -94,7 +94,7 @@ enum {
Opt_multiuser, Opt_sloppy, Opt_nosharesock,
Opt_persistent, Opt_nopersistent,
Opt_resilient, Opt_noresilient,
- Opt_domainauto,
+ Opt_domainauto, Opt_rdma,
/* Mount options which take numeric value */
Opt_backupuid, Opt_backupgid, Opt_uid,
@@ -185,6 +185,7 @@ static const match_table_t cifs_mount_option_tokens = {
{ Opt_resilient, "resilienthandles"},
{ Opt_noresilient, "noresilienthandles"},
{ Opt_domainauto, "domainauto"},
+ { Opt_rdma, "rdma"},
{ Opt_backupuid, "backupuid=%s" },
{ Opt_backupgid, "backupgid=%s" },
@@ -1541,6 +1542,9 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
case Opt_domainauto:
vol->domainauto = true;
break;
+ case Opt_rdma:
+ vol->rdma = true;
+ break;
/* Numeric Values */
case Opt_backupuid:
@@ -1931,6 +1935,21 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
goto cifs_parse_mount_err;
}
+ if (vol->rdma) {
+ switch (vol->vals->protocol_id) {
+ case SMB30_PROT_ID:
+ case SMB302_PROT_ID:
+ case SMB311_PROT_ID:
+ break;
+ default:
+ cifs_dbg(
+ VFS,
+ "SMBDirect requires Version "
+ "3.0, 3.02 or 3.1.1\n");
+ goto cifs_parse_mount_err;
+ }
+ }
+
#ifndef CONFIG_KEYS
/* Muliuser mounts require CONFIG_KEYS support */
if (vol->multiuser) {
@@ -2134,6 +2153,9 @@ static int match_server(struct TCP_Server_Info *server, struct smb_vol *vol)
if (server->echo_interval != vol->echo_interval * HZ)
return 0;
+ if (server->rdma != vol->rdma)
+ return 0;
+
return 1;
}
@@ -2234,6 +2256,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
tcp_ses->noblocksnd = volume_info->noblocksnd;
tcp_ses->noautotune = volume_info->noautotune;
tcp_ses->tcp_nodelay = volume_info->sockopt_tcp_nodelay;
+ tcp_ses->rdma = volume_info->rdma;
tcp_ses->in_flight = 0;
tcp_ses->credits = 1;
init_waitqueue_head(&tcp_ses->response_q);
--
2.7.4
[toc] | [next] | [standalone]
| From | Leon Romanovsky <leon@kernel.org> |
|---|---|
| Date | 2017-08-21 06:40 +0200 |
| Message-ID | <ugMFj-82E-3@gated-at.bofh.it> |
| In reply to | #1715998 |
[Multipart message — attachments visible in raw view] — view raw
On Sun, Aug 20, 2017 at 12:04:25PM -0700, Long Li wrote:
> From: Long Li <longli@microsoft.com>
>
> Add "rdma" to CIFS mount option, which tells CIFS this is for connecting to a SMB server over SMBDirect. Add checks to validate this feature is only used on SMB 3.X dialects.
>
> To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
>
> Signed-off-by: Long Li <longli@microsoft.com>
> ---
> fs/cifs/cifs_debug.c | 2 ++
> fs/cifs/cifsfs.c | 2 ++
> fs/cifs/cifsglob.h | 3 +++
> fs/cifs/connect.c | 25 ++++++++++++++++++++++++-
> 4 files changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
> index 9727e1d..ba0870d 100644
> --- a/fs/cifs/cifs_debug.c
> +++ b/fs/cifs/cifs_debug.c
> @@ -171,6 +171,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
> ses->ses_count, ses->serverOS, ses->serverNOS,
> ses->capabilities, ses->status);
> }
> + if (server->rdma)
> + seq_printf(m, "RDMA\n\t");
> seq_printf(m, "TCP status: %d\n\tLocal Users To "
> "Server: %d SecMode: 0x%x Req On Wire: %d",
> server->tcpStatus, server->srv_count,
> diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
> index fe0c8dc..a628800 100644
> --- a/fs/cifs/cifsfs.c
> +++ b/fs/cifs/cifsfs.c
> @@ -330,6 +330,8 @@ cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
> default:
> seq_puts(s, "(unknown)");
> }
> + if (server->rdma)
> + seq_puts(s, ",rdma");
> }
>
> static void
> diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
> index 8289f95..703c2fb 100644
> --- a/fs/cifs/cifsglob.h
> +++ b/fs/cifs/cifsglob.h
> @@ -531,6 +531,7 @@ struct smb_vol {
> bool nopersistent:1;
> bool resilient:1; /* noresilient not required since not fored for CA */
> bool domainauto:1;
> + bool rdma:1;
> unsigned int rsize;
> unsigned int wsize;
> bool sockopt_tcp_nodelay:1;
> @@ -649,6 +650,8 @@ struct TCP_Server_Info {
> bool sec_kerberos; /* supports plain Kerberos */
> bool sec_mskerberos; /* supports legacy MS Kerberos */
> bool large_buf; /* is current buffer large? */
> + /* use SMBD connection instead of socket */
> + bool rdma;
> struct delayed_work echo; /* echo ping workqueue job */
> char *smallbuf; /* pointer to current "small" buffer */
> char *bigbuf; /* pointer to current "big" buffer */
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index 2eeaac6..d5d0ecd 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -94,7 +94,7 @@ enum {
> Opt_multiuser, Opt_sloppy, Opt_nosharesock,
> Opt_persistent, Opt_nopersistent,
> Opt_resilient, Opt_noresilient,
> - Opt_domainauto,
> + Opt_domainauto, Opt_rdma,
>
> /* Mount options which take numeric value */
> Opt_backupuid, Opt_backupgid, Opt_uid,
> @@ -185,6 +185,7 @@ static const match_table_t cifs_mount_option_tokens = {
> { Opt_resilient, "resilienthandles"},
> { Opt_noresilient, "noresilienthandles"},
> { Opt_domainauto, "domainauto"},
> + { Opt_rdma, "rdma"},
>
> { Opt_backupuid, "backupuid=%s" },
> { Opt_backupgid, "backupgid=%s" },
> @@ -1541,6 +1542,9 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
> case Opt_domainauto:
> vol->domainauto = true;
> break;
> + case Opt_rdma:
> + vol->rdma = true;
> + break;
>
> /* Numeric Values */
> case Opt_backupuid:
> @@ -1931,6 +1935,21 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
> goto cifs_parse_mount_err;
> }
>
> + if (vol->rdma) {
> + switch (vol->vals->protocol_id) {
> + case SMB30_PROT_ID:
> + case SMB302_PROT_ID:
> + case SMB311_PROT_ID:
> + break;
In cover letter, you wrote that this option is relevant for 3.X versions,
so why do you write explicitly versions and don't do check if (version > SMB30_PROT_ID) ...?
Thanks
[toc] | [prev] | [next] | [standalone]
| From | Long Li <longli@microsoft.com> |
|---|---|
| Date | 2017-08-21 20:20 +0200 |
| Message-ID | <ugZsS-7Lt-1@gated-at.bofh.it> |
| In reply to | #1716089 |
> -----Original Message-----
> From: Leon Romanovsky [mailto:leon@kernel.org]
> Sent: Sunday, August 20, 2017 9:36 PM
> To: Long Li <longli@microsoft.com>
> Cc: Steve French <sfrench@samba.org>; linux-cifs@vger.kernel.org; samba-
> technical@lists.samba.org; linux-kernel@vger.kernel.org; linux-
> rdma@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Tom Talpey
> <ttalpey@microsoft.com>; Matthew Wilcox <mawilcox@microsoft.com>;
> Long Li <longli@microsoft.com>
> Subject: Re: [Patch v2 01/19] CIFS: Add RDMA mount option
>
> On Sun, Aug 20, 2017 at 12:04:25PM -0700, Long Li wrote:
> > From: Long Li <longli@microsoft.com>
> >
> > Add "rdma" to CIFS mount option, which tells CIFS this is for connecting to a
> SMB server over SMBDirect. Add checks to validate this feature is only used
> on SMB 3.X dialects.
> >
> > To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
> >
> > Signed-off-by: Long Li <longli@microsoft.com>
> > ---
> > fs/cifs/cifs_debug.c | 2 ++
> > fs/cifs/cifsfs.c | 2 ++
> > fs/cifs/cifsglob.h | 3 +++
> > fs/cifs/connect.c | 25 ++++++++++++++++++++++++-
> > 4 files changed, 31 insertions(+), 1 deletion(-)
> >
> > diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index
> > 9727e1d..ba0870d 100644
> > --- a/fs/cifs/cifs_debug.c
> > +++ b/fs/cifs/cifs_debug.c
> > @@ -171,6 +171,8 @@ static int cifs_debug_data_proc_show(struct
> seq_file *m, void *v)
> > ses->ses_count, ses->serverOS, ses-
> >serverNOS,
> > ses->capabilities, ses->status);
> > }
> > + if (server->rdma)
> > + seq_printf(m, "RDMA\n\t");
> > seq_printf(m, "TCP status: %d\n\tLocal Users To "
> > "Server: %d SecMode: 0x%x Req On
> Wire: %d",
> > server->tcpStatus, server->srv_count, diff -
> -git
> > a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index fe0c8dc..a628800 100644
> > --- a/fs/cifs/cifsfs.c
> > +++ b/fs/cifs/cifsfs.c
> > @@ -330,6 +330,8 @@ cifs_show_address(struct seq_file *s, struct
> TCP_Server_Info *server)
> > default:
> > seq_puts(s, "(unknown)");
> > }
> > + if (server->rdma)
> > + seq_puts(s, ",rdma");
> > }
> >
> > static void
> > diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index
> > 8289f95..703c2fb 100644
> > --- a/fs/cifs/cifsglob.h
> > +++ b/fs/cifs/cifsglob.h
> > @@ -531,6 +531,7 @@ struct smb_vol {
> > bool nopersistent:1;
> > bool resilient:1; /* noresilient not required since not fored for CA */
> > bool domainauto:1;
> > + bool rdma:1;
> > unsigned int rsize;
> > unsigned int wsize;
> > bool sockopt_tcp_nodelay:1;
> > @@ -649,6 +650,8 @@ struct TCP_Server_Info {
> > bool sec_kerberos; /* supports plain Kerberos */
> > bool sec_mskerberos; /* supports legacy MS
> Kerberos */
> > bool large_buf; /* is current buffer large? */
> > + /* use SMBD connection instead of socket */
> > + bool rdma;
> > struct delayed_work echo; /* echo ping workqueue job */
> > char *smallbuf; /* pointer to current "small" buffer */
> > char *bigbuf; /* pointer to current "big" buffer */
> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index
> > 2eeaac6..d5d0ecd 100644
> > --- a/fs/cifs/connect.c
> > +++ b/fs/cifs/connect.c
> > @@ -94,7 +94,7 @@ enum {
> > Opt_multiuser, Opt_sloppy, Opt_nosharesock,
> > Opt_persistent, Opt_nopersistent,
> > Opt_resilient, Opt_noresilient,
> > - Opt_domainauto,
> > + Opt_domainauto, Opt_rdma,
> >
> > /* Mount options which take numeric value */
> > Opt_backupuid, Opt_backupgid, Opt_uid, @@ -185,6 +185,7 @@
> static
> > const match_table_t cifs_mount_option_tokens = {
> > { Opt_resilient, "resilienthandles"},
> > { Opt_noresilient, "noresilienthandles"},
> > { Opt_domainauto, "domainauto"},
> > + { Opt_rdma, "rdma"},
> >
> > { Opt_backupuid, "backupuid=%s" },
> > { Opt_backupgid, "backupgid=%s" },
> > @@ -1541,6 +1542,9 @@ cifs_parse_mount_options(const char
> *mountdata, const char *devname,
> > case Opt_domainauto:
> > vol->domainauto = true;
> > break;
> > + case Opt_rdma:
> > + vol->rdma = true;
> > + break;
> >
> > /* Numeric Values */
> > case Opt_backupuid:
> > @@ -1931,6 +1935,21 @@ cifs_parse_mount_options(const char
> *mountdata, const char *devname,
> > goto cifs_parse_mount_err;
> > }
> >
> > + if (vol->rdma) {
> > + switch (vol->vals->protocol_id) {
> > + case SMB30_PROT_ID:
> > + case SMB302_PROT_ID:
> > + case SMB311_PROT_ID:
> > + break;
>
> In cover letter, you wrote that this option is relevant for 3.X versions, so why
> do you write explicitly versions and don't do check if (version >
> SMB30_PROT_ID) ...?
Thanks for pointing it out. I will fix this.
>
> Thanks
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web