Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1711931 > unrolled thread
| Started by | Adrian Hunter <adrian.hunter@intel.com> |
|---|---|
| First post | 2017-08-15 09:50 +0200 |
| Last post | 2017-08-17 07:40 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL Adrian Hunter <adrian.hunter@intel.com> - 2017-08-15 09:50 +0200
Re: [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL Kishon Vijay Abraham I <kishon@ti.com> - 2017-08-17 07:40 +0200
| From | Adrian Hunter <adrian.hunter@intel.com> |
|---|---|
| Date | 2017-08-15 09:50 +0200 |
| Subject | Re: [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL |
| Message-ID | <ueELT-6RV-3@gated-at.bofh.it> |
On 07/08/17 19:01, Kishon Vijay Abraham I wrote:
> TI's implementation of sdhci controller used in DRA7 SoC's uses
> POWER_CONTROL register for configuring IO voltage and not
> for core voltage (vdd) which is it's intended use. Add a quirk
> to indicate broken POWER_CONTROL register.
A quirk isn't needed for this. Use the ->set_power() callback instead.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/mmc/host/sdhci.c | 6 ++++++
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 8 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d5050ec42481..a7465a56e6b5 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1419,6 +1419,9 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
>
> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>
> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
> + return;
> +
> if (mode != MMC_POWER_OFF)
> sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
> else
> @@ -1430,6 +1433,9 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> {
> u8 pwr = 0;
>
> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
> + return;
> +
> if (mode != MMC_POWER_OFF) {
> switch (1 << vdd) {
> case MMC_VDD_165_195:
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 39c7a2723906..ba94cca7c892 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -439,6 +439,8 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_NO_CRC_STRIPPING (1<<16)
> /* Controller has bad caps bits, but really supports DMA */
> #define SDHCI_QUIRK2_FORCE_ADMA (1<<17)
> +/* Controller uses POWER_CONTROL for managing IO voltage and not core voltage */
> +#define SDHCI_QUIRK2_BROKEN_POWER_CONTROL (1<<18)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
>
[toc] | [next] | [standalone]
| From | Kishon Vijay Abraham I <kishon@ti.com> |
|---|---|
| Date | 2017-08-17 07:40 +0200 |
| Message-ID | <uflHb-lG-5@gated-at.bofh.it> |
| In reply to | #1711931 |
On Tuesday 15 August 2017 01:11 PM, Adrian Hunter wrote:
> On 07/08/17 19:01, Kishon Vijay Abraham I wrote:
>> TI's implementation of sdhci controller used in DRA7 SoC's uses
>> POWER_CONTROL register for configuring IO voltage and not
>> for core voltage (vdd) which is it's intended use. Add a quirk
>> to indicate broken POWER_CONTROL register.
>
> A quirk isn't needed for this. Use the ->set_power() callback instead.
sure!
Thanks
Kishon
>
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> drivers/mmc/host/sdhci.c | 6 ++++++
>> drivers/mmc/host/sdhci.h | 2 ++
>> 2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index d5050ec42481..a7465a56e6b5 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -1419,6 +1419,9 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
>>
>> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>>
>> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> + return;
>> +
>> if (mode != MMC_POWER_OFF)
>> sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
>> else
>> @@ -1430,6 +1433,9 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
>> {
>> u8 pwr = 0;
>>
>> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> + return;
>> +
>> if (mode != MMC_POWER_OFF) {
>> switch (1 << vdd) {
>> case MMC_VDD_165_195:
>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>> index 39c7a2723906..ba94cca7c892 100644
>> --- a/drivers/mmc/host/sdhci.h
>> +++ b/drivers/mmc/host/sdhci.h
>> @@ -439,6 +439,8 @@ struct sdhci_host {
>> #define SDHCI_QUIRK2_NO_CRC_STRIPPING (1<<16)
>> /* Controller has bad caps bits, but really supports DMA */
>> #define SDHCI_QUIRK2_FORCE_ADMA (1<<17)
>> +/* Controller uses POWER_CONTROL for managing IO voltage and not core voltage */
>> +#define SDHCI_QUIRK2_BROKEN_POWER_CONTROL (1<<18)
>>
>> int irq; /* Device IRQ */
>> void __iomem *ioaddr; /* Mapped address */
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web