Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1713483 > unrolled thread

[PATCH v2 2/2] dt-bindings: sound: add dmicen property in dmic driver

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 2/2] dt-bindings: sound: add dmicen property in dmic driver Lin Huang <hl@rock-chips.com> - 2017-08-17 04:30 +0200

#1713483 — [PATCH v2 2/2] dt-bindings: sound: add dmicen property in dmic driver

From: huang lin <hl@rock-chips.com>

there may use enable pin to control dmic start and stop,
so add this property in dt-bindings.

Signed-off-by: Lin Huang <hl@rock-chips.com>
---
 Documentation/devicetree/bindings/sound/dmic.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt
index a0c58f2..54c8ef6 100644
--- a/Documentation/devicetree/bindings/sound/dmic.txt
+++ b/Documentation/devicetree/bindings/sound/dmic.txt
@@ -5,8 +5,12 @@ This device support generic PDM digital microphone.
 Required properties:
 	- compatible: should be "dmic-codec".
 
+Optional properties:
+	- dmicen-gpios: GPIO specifier for dmic to control start and stop
+
 Example node:
 
 	dmic_codec: dmic@0 {
 		compatible = "dmic-codec";
+		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 	};
-- 
2.7.4

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web