Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1714433 > unrolled thread
| Started by | Laurent Dufour <ldufour@linux.vnet.ibm.com> |
|---|---|
| First post | 2017-08-18 00:10 +0200 |
| Last post | 2017-08-21 09:00 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v2 20/20] powerpc/mm: Add speculative page fault Laurent Dufour <ldufour@linux.vnet.ibm.com> - 2017-08-18 00:10 +0200
Re: [PATCH v2 20/20] powerpc/mm: Add speculative page fault Anshuman Khandual <khandual@linux.vnet.ibm.com> - 2017-08-21 09:00 +0200
| From | Laurent Dufour <ldufour@linux.vnet.ibm.com> |
|---|---|
| Date | 2017-08-18 00:10 +0200 |
| Subject | [PATCH v2 20/20] powerpc/mm: Add speculative page fault |
| Message-ID | <ufB9h-2BN-45@gated-at.bofh.it> |
This patch enable the speculative page fault on the PowerPC
architecture.
This will try a speculative page fault without holding the mmap_sem,
if it returns with WM_FAULT_RETRY, the mmap_sem is acquired and the
traditional page fault processing is done.
Support is only provide for BOOK3S_64 currently because:
- require CONFIG_PPC_STD_MMU because checks done in
set_access_flags_filter()
- require BOOK3S because we can't support for book3e_hugetlb_preload()
called by update_mmu_cache()
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/book3s/64/pgtable.h | 5 +++++
arch/powerpc/mm/fault.c | 30 +++++++++++++++++++++++++++-
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 818a58fc3f4f..897f8b9f67e6 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -313,6 +313,11 @@ extern unsigned long pci_io_base;
/* Advertise support for _PAGE_SPECIAL */
#define __HAVE_ARCH_PTE_SPECIAL
+/* Advertise that we call the Speculative Page Fault handler */
+#if defined(CONFIG_PPC_BOOK3S_64)
+#define __HAVE_ARCH_CALL_SPF
+#endif
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 4c422632047b..7b3cc4c30eab 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -291,9 +291,36 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
if (is_write && is_user)
store_update_sp = store_updates_sp(regs);
- if (is_user)
+ if (is_user) {
flags |= FAULT_FLAG_USER;
+#if defined(__HAVE_ARCH_CALL_SPF)
+ /* let's try a speculative page fault without grabbing the
+ * mmap_sem.
+ */
+
+ /*
+ * flags is set later based on the VMA's flags, for the common
+ * speculative service, we need some flags to be set.
+ */
+ if (is_write)
+ flags |= FAULT_FLAG_WRITE;
+
+ fault = handle_speculative_fault(mm, address, flags);
+ if (!(fault & VM_FAULT_RETRY || fault & VM_FAULT_ERROR)) {
+ perf_sw_event(PERF_COUNT_SW_SPF_DONE, 1,
+ regs, address);
+ goto done;
+ }
+
+ /*
+ * Resetting flags since the following code assumes
+ * FAULT_FLAG_WRITE is not set.
+ */
+ flags &= ~FAULT_FLAG_WRITE;
+#endif /* defined(__HAVE_ARCH_CALL_SPF) */
+ }
+
/* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in the
* kernel and should generate an OOPS. Unfortunately, in the case of an
@@ -479,6 +506,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
rc = 0;
}
+done:
/*
* Major/minor page fault accounting.
*/
--
2.7.4
[toc] | [next] | [standalone]
| From | Anshuman Khandual <khandual@linux.vnet.ibm.com> |
|---|---|
| Date | 2017-08-21 09:00 +0200 |
| Message-ID | <ugOQO-Sc-5@gated-at.bofh.it> |
| In reply to | #1714433 |
On 08/18/2017 03:35 AM, Laurent Dufour wrote:
> This patch enable the speculative page fault on the PowerPC
> architecture.
>
> This will try a speculative page fault without holding the mmap_sem,
> if it returns with WM_FAULT_RETRY, the mmap_sem is acquired and the
s/WM_FAULT_RETRY/VM_FAULT_RETRY/
> traditional page fault processing is done.
>
> Support is only provide for BOOK3S_64 currently because:
> - require CONFIG_PPC_STD_MMU because checks done in
> set_access_flags_filter()
What checks are done in set_access_flags_filter() ? We are just
adding the code block in do_page_fault().
> - require BOOK3S because we can't support for book3e_hugetlb_preload()
> called by update_mmu_cache()
>
> Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/book3s/64/pgtable.h | 5 +++++
> arch/powerpc/mm/fault.c | 30 +++++++++++++++++++++++++++-
> 2 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
> index 818a58fc3f4f..897f8b9f67e6 100644
> --- a/arch/powerpc/include/asm/book3s/64/pgtable.h
> +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
> @@ -313,6 +313,11 @@ extern unsigned long pci_io_base;
> /* Advertise support for _PAGE_SPECIAL */
> #define __HAVE_ARCH_PTE_SPECIAL
>
> +/* Advertise that we call the Speculative Page Fault handler */
> +#if defined(CONFIG_PPC_BOOK3S_64)
> +#define __HAVE_ARCH_CALL_SPF
> +#endif
> +
> #ifndef __ASSEMBLY__
>
> /*
> diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
> index 4c422632047b..7b3cc4c30eab 100644
> --- a/arch/powerpc/mm/fault.c
> +++ b/arch/powerpc/mm/fault.c
> @@ -291,9 +291,36 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
> if (is_write && is_user)
> store_update_sp = store_updates_sp(regs);
>
> - if (is_user)
> + if (is_user) {
> flags |= FAULT_FLAG_USER;
>
> +#if defined(__HAVE_ARCH_CALL_SPF)
> + /* let's try a speculative page fault without grabbing the
> + * mmap_sem.
> + */
> +
> + /*
> + * flags is set later based on the VMA's flags, for the common
> + * speculative service, we need some flags to be set.
> + */
> + if (is_write)
> + flags |= FAULT_FLAG_WRITE;
> +
> + fault = handle_speculative_fault(mm, address, flags);
> + if (!(fault & VM_FAULT_RETRY || fault & VM_FAULT_ERROR)) {
> + perf_sw_event(PERF_COUNT_SW_SPF_DONE, 1,
> + regs, address);
> + goto done;
Why we should retry with classical page fault on VM_FAULT_ERROR ?
We should always return VM_FAULT_RETRY in case there is a clear
collision some where which requires retry with classical method
and return VM_FAULT_ERROR in cases where we know that it cannot
be retried and fail for good. Should not handle_speculative_fault()
be changed to accommodate this ?
> + }
> +
> + /*
> + * Resetting flags since the following code assumes
> + * FAULT_FLAG_WRITE is not set.
> + */
> + flags &= ~FAULT_FLAG_WRITE;
> +#endif /* defined(__HAVE_ARCH_CALL_SPF) */
Setting and resetting of FAULT_FLAG_WRITE seems confusing. Why you
say that some flags need to be set for handle_speculative_fault()
function. Could you elaborate on this ?
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web